> I would be very thankful if someone could help me to isolate and
> solve this
> problem.
>
> Thanks in advance.
>
> Regards,
>
> Jose
>
> ps. below is the output of dmesg.
>
>
>
> OpenBSD 4.0 (GENERIC.MP) #936: Sat Sep 16 19:27:28 MDT 2006
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3
> 6,CFLUS
> H,
> DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
> real mem = 1073094656 (1047944K)
> avail mem = 970813440 (948060K)
> using 4256 buffers containing 53755904 bytes (52496K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 01/17/05, BIOS32 rev. 0 @
> 0xfd721,
> SMBIOS rev. 2.3 @ 0xf602c (50 entries)
> bios0: IBM eserver xSeries 336 -[883721U]-
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
> pcibios0: PCI BIOS has 11 Interrupt Routing table entries
> pcibios0: PCI Exclusive IRQs: 9 10 11 15
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC"
> rev 0x00)
> pcibios0: PCI bus #7 is the last bus
> bios0: ROM list: 0xc0000/0xb000 0xcb000/0x4000
> ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
> mainbus0: Intel MP Specification (Version 1.4) (IBM ENSW X336 SMP )
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 200 MHz
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type PCI
> mainbus0: bus 4 is type PCI
> mainbus0: bus 5 is type PCI
> mainbus0: bus 6 is type PCI
> mainbus0: bus 7 is type PCI
> mainbus0: bus 8 is type ISA
> ioapic0 at mainbus0: apid 14 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 13 pa 0xfec82000, version 20, 24 pins
> ioapic2 at mainbus0: apid 12 pa 0xfec82400, version 20, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0a
> "Intel E7520 MCH ERR" rev 0x0a at pci0 dev 0 function 1 not configured
> ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0a
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0a
> pci2 at ppb1 bus 3
> ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci3 at ppb2 bus 4
> mpi0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08:
> apic 13 int 4
> (irq 11)
> scsibus0 at mpi0: 16 targets
> sd0 at scsibus0 targ 0 lun 0: SCSI2
> 0/direct
> fixed
> sd0: 286102MB, 78753 cyl, 8 head, 930 sec, 512 bytes/sec, 585937500
> sec total
> safte0 at scsibus0 targ 8 lun 0: SCSI2 3/
> processor
> fixed
> mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 0 DT 1 IU 1
> ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
> pci4 at ppb3 bus 5
> ppb4 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0a
> pci5 at ppb4 bus 6
> bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1
> (0x4001):
> apic 14 int 16 (irq 11), address 00:0d:60:99:a3:b2
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb5 at pci0 dev 7 function 0 "Intel MCH PCIE" rev 0x0a
> pci6 at ppb5 bus 7
> bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1
> (0x4001):
> apic 14 int 16 (irq 11), address 00:0d:60:99:a3:b3
> brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> "Intel E7525 MCH Configuration" rev 0x0a at pci0 dev 8 function 0 not
> configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02:
> apic 14 int
> 16 (irq 11)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02:
> apic 14 int
> 19 (irq 3)
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02:
> apic 14 int
> 23 (irq 5)
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
> pci7 at ppb6 bus 1
> vga1 at pci7 dev 1 function 0 "ATI Radeon VE QY" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
> pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02:
> DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0:
> SCSI0 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev
> 0x02: apic 14
> int 17 (irq 3)
> iic0 at ichiic0: disabled to avoid ipmi0 interactions
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0:
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> biomask 0 netmask 0 ttymask 0
> ioapic0: pin 16 shares different IPL interrupts (40..50), degraded
> performance
> pctr: user-level cycle counter enabled
> uhub3 at uhub0 port 2
> uhub3: Texas Instruments TUSB2046 hub, rev 1.10/1.25, addr 2
> uhub3: 4 ports with 4 removable, self powered
> uhub4 at uhub3 port 1
> uhub4: Texas Instruments TUSB2046 hub, rev 1.10/1.25, addr 3
> uhub4: 4 ports with 4 removable, self powered
> uhidev0 at uhub3 port 2 configuration 1 interface 0
> uhidev0: PS2/USB KVM PS2/USB KVM, rev 1.10/1.00, addr 4, iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub3 port 2 configuration 1 interface 1
> uhidev1: PS2/USB KVM PS2/USB KVM, rev 1.10/1.00, addr 4, iclass 3/1
> ums0 at uhidev1: 5 buttons and Z dir.
> wsmouse1 at ums0 mux 0
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
>
> =
> Castila, Spanish Language School
> Castila offers Spanish language courses in Granada, Spain. Learn
> with the
> highest quality standards while you have an unforgettable experience.
>
http://a8-asy.a8ww.net/a8-ads/adftrclick?
> redirectid=06e882c56b8c470f638896af3
> 9304a46
