On Dec 13, 2007 9:25 PM, Marcos Laufer  wrote:

quoted text
> Hello,

>

> I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad

> processor, this is the

> dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)

boot -c to go in UKC or config -ef /bsd and use 'disable apm'

to get acpi to attach. Maybe it will help.

Also, you can get a newer snapshot.
>

quoted text
> OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007

>     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC

> RTC BIOS diagnostic error 80

> cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)

> 2.39 GHz

> cpu0:

> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS

> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,

> xTPR

> real mem  = 2097643520 (2000MB)

> avail mem = 2020409344 (1926MB)

> RTC BIOS diagnostic error 80

> mainbus0 at root

> bios0 at mainbus0: AT/286+ BIOS, date 07/26/07, SMBIOS rev. 2.4 @ 0xe2460 (30

> entries)

> bios0: vendor Intel Corp. version "JOQ3510J.86A.0559.2007.0726.0425" date

> 07/26/2007

> bios0: Intel Corporation DQ35MP

> apm0 at bios0: Power Management spec V1.2

> apm0: battery life expectancy 0%

> apm0: AC off, battery charge unknown, estimated 0:00 hours

> pcibios at bios0 function 0x1a not configured

> bios0: ROM list: 0xc0000/0xb400! 0xcb800/0x1e00! 0xcd800/0x1000

> 0xce800/0x1000

> cpu0 at mainbus0

> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)

> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x29b0 rev

> 0x02

> vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x29b2 rev 0x02:

> aperture at 0x90200000, size 0x8000000

> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

> vendor "Intel", unknown product 0x29b4 (class communications subclass

> miscellaneous, rev 0x02) at pci0 dev 3 function 0 not configured

> pciide0 at pci0 dev 3 function 2 vendor "Intel", unknown product 0x29b6 rev

> 0x02: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to

> native-PCI

> pciide0: using irq 9 for native-PCI interrupt

> pciide0: channel 0 ignored (not responding; disabled or no drives?)

> pciide0: channel 1 ignored (not responding; disabled or no drives?)

> vendor "Intel", unknown product 0x29b7 (class communications subclass serial,

> rev 0x02) at pci0 dev 3 function 3 not configured

> "Intel ICH9 IGP AMT" rev 0x02 at pci0 dev 25 function 0 not configured

> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: irq 9

> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: irq 9

> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: irq 10

> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: irq 10

> usb0 at ehci0: USB revision 2.0

> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1

> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02

> pci1 at ppb0 bus 1

> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02

> pci2 at ppb1 bus 2

> ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02

> pci3 at ppb2 bus 3

> pciide1 at pci3 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA

> (unsupported), channel 0 configured to native-PCI, channel 1 configured to

> native-PCI

> pciide1: using irq 9 for native-PCI interrupt

> pciide1: channel 0 ignored (not responding; disabled or no drives?)

> pciide1: channel 1 ignored (not responding; disabled or no drives?)

> ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02

> pci4 at ppb3 bus 4

> ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02

> pci5 at ppb4 bus 5

> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 10

> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 11

> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 9

> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 10

> usb1 at ehci1: USB revision 2.0

> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1

> ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x92

> pci6 at ppb5 bus 6

> ichpcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02: PM disabled

> ahci0 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x2922 rev

> 0x02: irq 9, AHCI 1.2

> scsibus0 at ahci0: 32 targets

> sd0 at scsibus0 targ 1 lun 0:  SCSI2 0/direct

> fixed

> sd0: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec

> total

> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: irq 9

> iic0 at ichiic0

> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5

> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5

> usb2 at uhci0: USB revision 1.0

> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> usb3 at uhci1: USB revision 1.0

> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> usb4 at uhci2: USB revision 1.0

> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> usb5 at uhci3: USB revision 1.0

> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> usb6 at uhci4: USB revision 1.0

> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> usb7 at uhci5: USB revision 1.0

> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> isa0 at ichpcib0

> isadma0 at isa0

> pckbc0 at isa0 port 0x60/5

> pckbd0 at pckbc0 (kbd slot)

> pckbc0: using irq 1 for kbd slot

> wskbd0 at pckbd0: console keyboard, using wsdisplay0

> pcppi0 at isa0 port 0x61

> midi0 at pcppi0:

> spkr0 at pcppi0

> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16

> biomask fffd netmask fffd ttymask ffff

> mtrr: Pentium Pro MTRR support

> uhidev0 at uhub7 port 1 configuration 1 interface 0 "vendor 0x13ba Generic USB

> K/B" rev 1.10/0.01 addr 2

> uhidev0: iclass 3/1

> ukbd0 at uhidev0: 8 modifier keys, 6 key codes

> wskbd1 at ukbd0 mux 1

> wskbd1: connecting to wsdisplay0

> uhidev1 at uhub7 port 1 configuration 1 interface 1 "vendor 0x13ba Generic USB

> K/B" rev 1.10/0.01 addr 2

> uhidev1: iclass 3/1, 2 report ids

> ums0 at uhidev1 reportid 1: 3 buttons and Z dir.

> wsmouse0 at ums0 mux 0

> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0

> dkcsum: sd0 matches BIOS drive 0x80

> root on sd0a swap on sd0b dump on sd0b

> umass0 at uhub0 port 5 configuration 1 interface 0 "USB Audio Player" rev

> 2.00/0.02 addr 2

> umass0: using SCSI over Bulk-Only

> scsibus1 at umass0: 2 targets

> sd1 at scsibus1 targ 1 lun 0: <, Audio Player, \001> SCSI0 0/direct

> removable

> sd1: 968MB, 123 cyl, 255 head, 63 sec, 512 bytes/sec, 1984000 sec total

>

> Regards,

>

> Marcos Laufer

>

>

--

Pierre Riteau