Re: setxkbmap kills X

> Hi,
>
> as you can read in the subject, running e.g. setxkbmap us will kill X totally.
>
> I don't see any core dumped or similar.
>
> What can be the problem?
>
> Here you are my dmesg (an "zzz" froze the laptop and I had to power it
> off) and xorg.conf
>
> But X crashed also when not using an xorg.conf (i.e., running it "on the fly)
>
> -------------------------------------------------------------------------------------------------
>
> OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 1700MHz ("GenuineIntel"
> 686-class) 1.70 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
> real mem = 2146398208 (2046MB)
> avail mem = 2067853312 (1972MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/20/05, BIOS32 rev. 0 @
> 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (61 entries)
> bios0: vendor IBM version "1RETDIWW (3.14 )" date 01/20/2005
> bios0: IBM 23739FU
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 100%
> apm0: AC on, battery charge high
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #6 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000
> cpu0 at mainbus0
> cpu0: Enhanced SpeedStep 1700 MHz (1484 mV): speeds: 1700, 1400, 1200,
> 1000, 800, 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M9 Lf" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
> pci2 at ppb1 bus 2
> cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
> cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
> em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03:
> irq 11, address 00:0d:60:89:7a:4d
> ath0 at pci2 dev 2 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01: irq 11
> ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR1W, address 00:05:4e:42:ea:6b
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01:
> 24-bit timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0:
> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
> iic0 at ichiic0
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq
> 11, ICH4 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0:
> spkr0 at pcppi0
> lpt2 at isa0 port 0x3bc/4: polled
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask effd netmask effd ttymask ffff
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
> auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
> umass0 at uhub0 port 3 configuration 1 interface 0
> umass0: LaCie LaCie Hard Drive, rev 2.00/0.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: SCSI2 0/direct fixed
> sd0: 57259MB, 7299 cyl, 255 head, 63 sec, 512 bytes/sec, 117266688 sec total
> sd0 detached
> scsibus1 detached
> umass0 detached
> umass0 at uhub0 port 3 configuration 1 interface 0
> umass0: USB Flash Disk, rev 2.00/2.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: SCSI2
> 0/direct removable
> sd0: 249MB, 31 cyl, 255 head, 63 sec, 512 bytes/sec, 511488 sec total
> sd0 detached
> scsibus1 detached
> umass0 detached
> umass0 at uhub0 port 4 configuration 1 interface 0
> umass0: USB Flash Disk, rev 2.00/2.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: SCSI2
> 0/direct removable
> sd0: 249MB, 31 cyl, 255 head, 63 sec, 512 bytes/sec, 511488 sec total
> sd0 detached
> scsibus1 detached
> umass0 detached
> umass0 at uhub0 port 3 configuration 1 interface 0
> umass0: USB Flash Disk, rev 2.00/2.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: SCSI2
> 0/direct removable
> sd0: 249MB, 31 cyl, 255 head, 63 sec, 512 bytes/sec, 511488 sec total
> sd0 detached
> scsibus1 detached
> umass0 detached
> umass0 at uhub0 port 3 configuration 1 interface 0
> umass0: USB Flash Disk, rev 2.00/2.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: SCSI2
> 0/direct removable
> sd0: 249MB, 31 cyl, 255 head, 63 sec, 512 bytes/sec, 511488 sec total
> sd0 detached
> scsibus1 detached
> umass0 detached
> umass0 at uhub0 port 4 configuration 1 interface 0
> umass0: USB Flash Disk, rev 2.00/2.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: SCSI2
> 0/direct removable
> sd0: 249MB, 31 cyl, 255 head, 63 sec, 512 bytes/sec, 511488 sec total
> sd0 detached
> scsibus1 detached
> umass0 detached
> umass0 at uhub0 port 3 configuration 1 interface 0
> umass0: USB Flash Disk, rev 2.00/2.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: SCSI2
> 0/direct removable
> sd0: 249MB, 31 cyl, 255 head, 63 sec, 512 bytes/sec, 511488 sec total
> sd0 detached
> scsibus1 detached
> umass0 detached
> ----------------------------------------------------------------------------------------
>
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> RgbPath "/usr/X11R6/share/X11/rgb"
> ModulePath "/usr/X11R6/lib/modules"
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
> FontPath "/usr/X11R6/lib/X11/fonts/OTF"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/local/share/ghostscript/fonts/"
> FontPath "/usr/local/share/fonts/override/"
> FontPath "/usr/local/share/fonts/"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "dbe"
> Load "extmod"
> Load "glx"
> Load "record"
> Load "xtrap"
> Load "freetype"
> Load "type1"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "wsmouse"
> Option "Device" "/dev/wsmouse"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: : integer, : float, : "True"/"False",
> ### : "String", : " Hz/kHz/MHz"
> ### [arg]: arg optional
> #http://xorg.freedesktop.org/archive/X11R7.0/doc/html/radeon.4.html
> Option "NoAccel" "False"
> Option "SWcursor" "True"
> #Option "Dac6Bit" # []
> #Option "Dac8Bit" # []
> #Option "PanelOff" # []
> #Option "DDCMode" # []
> #Option "MonitorLayout" # []
> #Option "IgnoreEDID" # []
> Option "UseFBDev" "True"
> #Option "MergedFB" # []
> #Option "CRT2HSync" # []
> #Option "CRT2VRefresh" # []
> #Option "CRT2Position" # []
> #Option "MetaModes" # []
> #Option "MergedDPI" # []
> #Option "MergedXinerama" # []
> #Option "MergedXineramaCRT2IsScreen0" # []
> #Option "MergedNonRectangular" # []
> #Option "MergedMouseRestriction" # []
> #Option "DisplayPriority" # []
> #Option "PanelSize" # []
> #Option "ForceMinDotClock" #
> #Option "ColorTiling" # []
> #Option "VideoKey" #
> #Option "RageTheatreCrystal" #
> #Option "RageTheatreTunerPort" #
> #Option "RageTheatreCompositePort" #
> #Option "RageTheatreSVideoPort" #
> #Option "TunerType" #
> #Option "RageTheatreMicrocPath" #
> #Option "RageTheatreMicrocType" #
> Option "RenderAccel" "True"
> #Option "SubPixelOrder" # []
> #Option "ShowCache" # []
> Option "DynamicClocks" "True"
> #Option "BIOSHotkeys" # []
> #Option "VGAAccess" # []
> #Option "ReverseDDC" # []
> #Option "LVDSProbePLL" # []
> #Option "AccelMethod" #
> Option "AccelMethod" "XXA"
> #Option "ConstantDPI" # []
> Identifier "Card0"
> Driver "ati"
> VendorName "ATI Technologies Inc"
> BoardName "Radeon R250 [Mobility FireGL 9000]"
> BusID "PCI:1:0:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> SubSection "Display"
> Viewport 0 0
> Depth 1
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection


linux-kernel:
Greg Kroah-Hartman	[PATCH 002/196] Chinese: rephrase English introduction in HOWTO
David Brown	Re: Linux 2.6.21-rc2
James Bottomley	Re: Integration of SCST in the mainstream Linux kernel
Justin C. Sherrill	Re: dragonflybsd.org website link?
git:

linux-netdev:
Ben Hutchings	Re: [GIT]: Networking

Gerrit Renker	[PATCH 15/37] dccp: Set per-connection CCIDs via socket options
Jarek Poplawski	Re: [PATCH] pkt_sched: Destroy gen estimators under rtnl_lock().
openbsd-misc:

Re: setxkbmap kills X

Online users