hi

i give a test on the alix with openssl speed, (see below)

i have no time to test with iperf, but a scp/sftp gimme

1.4MO/s for sending a file, and 3.3 MO/s for receiving one

the performance if the same with pf (pass in quick and pass out quick) and no pf.

a test with less overhead protocol must be better.
OpenSSL 0.9.7j 04 May 2006

built on: date not available

options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)

compiler: information not available

available timing options: USE_TOD HZ=100 [sysconf value]

timing function used: getrusage

The 'numbers' are in 1000s of bytes per second processed.

type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes

md2                241.70k      521.53k      725.90k      813.13k      836.69k

mdc2                 0.00         0.00         0.00         0.00         0.00

md4               1717.66k     6184.30k    18138.97k    35437.91k    48629.41k

md5               1523.14k     5475.53k    16318.13k    32470.44k    45382.15k

hmac(md5)         2130.63k     7323.63k    20092.91k    36169.01k    46399.49k

sha1              1403.40k     4361.82k    10298.88k    15529.66k    18337.83k

rmd160            1285.34k     3857.88k     8769.70k    12646.58k    14544.24k

rc4              22900.92k    28689.09k    30642.33k    31106.63k    31084.15k

des cbc           4860.02k     5343.06k     5517.98k     5510.81k     5526.13k

des ede3          2023.42k     2089.24k     2121.90k     2125.82k     2118.88k

idea cbc             0.00         0.00         0.00         0.00         0.00

rc2 cbc           2595.76k     2749.94k     2801.83k     2810.20k     2815.32k

rc5-32/12 cbc        0.00         0.00         0.00         0.00         0.00

blowfish cbc      6981.63k     8212.96k     8622.68k     8685.05k     8734.50k

cast cbc          6352.73k     7322.71k     7674.79k     7739.37k     7802.72k

aes-128 cbc       5871.72k     6205.27k     6328.14k     6366.70k     6367.72k

aes-192 cbc       5121.31k     5420.72k     5544.36k     5538.98k     5558.81k

aes-256 cbc       4640.51k     4839.40k     4922.88k     4945.92k     4922.33k

                  sign    verify    sign/s verify/s

rsa  512 bits 0.006537s 0.000742s    153.0   1348.2

rsa 1024 bits 0.030050s 0.001741s     33.3    574.3

rsa 2048 bits 0.170021s 0.005245s      5.9    190.6

rsa 4096 bits 1.091406s 0.017953s      0.9     55.7

                  sign    verify    sign/s verify/s

dsa  512 bits 0.004802s 0.005622s    208.2    177.9

dsa 1024 bits 0.013464s 0.016419s     74.3     60.9

dsa 2048 bits 0.044808s 0.054181s     22.3     18.5
Le Sun, 23 Sep 2007 13:33:19 +0200

earx  a pris sa plume:
> hi everyone

quoted text
> a new toy at house :)

> a pc engines 2b2 (two lan, two usb, two mini pci..500 mhz)

> http://www.pcengines.ch/alix2b2.htm

>

> OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007

>     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC

> RTC BIOS diagnostic error 80

> cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"

> 586-class) 499 MHz cpu0:

> FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX real mem  = 268009472

> (255MB) avail mem = 251506688 (239MB)

> RTC BIOS diagnostic error 80

> mainbus0 at root

> bios0 at mainbus0: AT/286+ BIOS, date 08/01/07, BIOS32 rev. 0 @

> 0xfcc1a pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000

> pcibios0: pcibios_get_intr_routing - function not supported

> pcibios0: PCI IRQ Routing information unavailable.

> pcibios0: PCI bus #0 is the last bus

> cpu0 at mainbus0

> pci0 at mainbus0 bus 0: configuration mode 1 (bios)

> pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31

> glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG

> AES vr0 at pci0 dev 12 function 0 "VIA VT6105M RhineIII" rev 0x96:

> irq 15, address 00:0d:b9:12:50:bc ukphy0 at vr0 phy 1: Generic IEEE

> 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr1 at

> pci0 dev 13 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,

> address 00:0d:b9:12:50:bc ukphy1 at vr1 phy 1: Generic IEEE 802.3u

> media interface, rev. 3: OUI 0x004063, model 0x0034 pcib0 at pci0 dev

> 15 function 0 "AMD CS5536 ISA" rev 0x03 pciide0 at pci0 dev 15

> function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to

> compatibility, channel 1 wired to compatibility wd0 at pciide0

> channel 0 drive 0:  wd0: 1-sector PIO, LBA, 495MB, 1014048

> sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0:

> channel 1 ignored (disabled) "AMD CS5536 Audio" rev 0x01 at pci0 dev

> 15 function 3 not configured ohci0 at pci0 dev 15 function 4 "AMD

> CS5536 USB" rev 0x02: irq 9, version 1.0, legacy support ehci0 at

> pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 9 usb0 at

> ehci0: USB revision 2.0 uhub0 at usb0: AMD EHCI root hub, rev

> 2.00/1.00, addr 1 isa0 at pcib0 isadma0 at isa0

> pcppi0 at isa0 port 0x61

> midi0 at pcppi0:

> spkr0 at pcppi0

> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16

> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

> pccom0: console

> usb1 at ohci0: USB revision 1.0

> uhub1 at usb1: AMD OHCI root hub, rev 1.00/1.00, addr 1

> biomask 77ef netmask ffef ttymask ffef

> pctr: user-level cycle counter enabled

> mtrr: K6-family MTRR support (2 registers)

> nvram: invalid checksum

> dkcsum: wd0 matches BIOS drive 0x80

> root on wd0a swap on wd0b dump on wd0b

> clock: unknown CMOS layout

> WARNING: clock time much less than file system time

> WARNING: using file system time

> WARNING: CHECK AND RESET THE DATE!