login
Login
/
Register
Search
Forums
News
Blogs
Features
Site
Home
»
Mailing list archives
»
openbsd-misc
»
2007
»
October
»
12
all kernels except i386 MP high cpu in interrupt -- was: 4.2 on H8SSL-I2: acpi at mainbus0 not configured
view
thread
Previous message: [thread] [
date
] [
author
]
Next message: [
thread
] [
date
] [
author
]
[view in full thread]
From:
knitti <knitti@...>
To: OpenBSD <misc@...>
Subject:
all kernels except i386 MP high cpu in interrupt -- was: 4.2 on H8SSL-I2: acpi at mainbus0 not configured
Date: Friday, October 12, 2007 - 6:21 am
On 10/11/07, knitti wrote:
quoted text
> Hi,
>
> after some sleep and coffee I am embarrassed to realize I made two mistakes:
> - I didn't provide a GENERIC(.MP) dmesg
> - I booted off the non-acpi-enabled kernel
> Sorry for that. Below you can see two GENERIC.MP dmesgs (i386/amd64)
> which clearly show that acpi is enabled and detected. However, one Problem
> remains: The interrupt load is very high on GENERIC/amd64 (with and without
> MP, with and without acpi) - about 70% of one cpu core on the idle machine.
> Different is GENERIC.MP/i386, which has low (normal) interrupt load.
>
> Shall I ditch amd64 and run i386 on the machine, or is there anything I can try?
>
> OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28 10:53:04 MDT 2007
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ ("AuthenticAMD"
> 686-class, 1024KB L2 cache) 3 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16
> real mem = 3220729856 (3071MB)
> avail mem = 3121356800 (2976MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 03/01/07, BIOS32 rev. 0 @
> 0xf0010, SMBIOS rev. 2.4 @ 0xfbcf0 (50 entries)
> bios0: vendor American Megatrends Inc. version "080011 " date 03/01/2007
> bios0: Supermicro H8SSL-I2
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4d40/176 (9 entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0x1166 product 0x0205
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xb000 0xcb000/0x2000!
> acpi0 at mainbus0: rev 0
> acpi0: tables DSDT FACP APIC OEMB
> acpitimer at acpi0 not configured
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 199 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ ("AuthenticAMD"
> 686-class, 1024KB L2 cache) 3 GHz
> cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
> ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
> ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (P0P1)
> acpiprt2 at acpi0: bus 2 (P1P2)
> acpicpu at acpi0 not configured
> acpicpu at acpi0 not configured
> acpibtn at acpi0 not configured
> acpibtn at acpi0 not configured
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
> pci2 at ppb1 bus 2
> bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
> (0x2100): apic 3 int 8 (irq 9), address 00:30:48:5e:6d:f6
> brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
> (0x2100): apic 3 int 9 (irq 5), address 00:30:48:5e:6d:f7
> brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> pciide0 at pci1 dev 14 function 0 "ServerWorks HT-1000 SATA" rev 0x00: DMA
> pciide0: using apic 2 int 11 (irq 11) for native-PCI interrupt
> pciide0: port 0: device present, speed: 1.5Gb/s
> wd0 at pciide0 channel 0 drive 0:
> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> pciide0: port 1: device present, speed: 1.5Gb/s
> wd1 at pciide0 channel 1 drive 0:
> wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> pciide0: port 2: PHY offline
> pciide0: port 3: PHY offline
> pciide1 at pci1 dev 14 function 1 "ServerWorks HT-1000 SATA" rev 0x00
> piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
> iic0 at piixpm0
> iic0: addr 0x2f 00=80 05=a8 06=ff 07=a8 08=ff 09=64 0a=64 0b=5e 0c=73
> 0d=5c 0e=7b 0f=12 10=b0 11=2e 13=ff 14=22 15=6f 16=d0 17=7b 18=d0
> 19=d0 1a=bf 1b=0f 1c=1f 1d=9c 1e=80 1f=80 20=1d 21=51 22=03 23=0f
> 25=0f 27=0f 29=0f 2b=0f 3b=ff 3c=ff 3d=ff 3e=ff 3f=ff 40=09 44=40
> 46=f7 47=ff 48=ff 49=7f 4a=3f 4b=02 4d=7c 50=1e 51=02 52=01 58=80
> 59=01 5c=03 5e=55 5f=03 60=ca 61=87 62=ca 63=87 64=ff 66=ff 67=ff
> 68=3f 6a=2b 6b=18 6c=7c 6d=65 6e=e3 6f=b9 70=8a 71=70 72=e5 73=bb
> 74=e5 75=bb 76=e3 77=b9 78=48 79=43 7a=48 7b=43 7c=48 7d=5f 7e=55
> 7f=50 80=64 81=5f 82=55 83=50 84=64 85=5f 86=55 87=50 88=46 89=41
> 8a=55 8b=50 8c=64 8d=5f 8e=55 8f=50 90=07 91=68 92=07 93=68 94=07
> 95=68 96=07 97=68 98=07 99=68 9a=07 9b=68 9c=07 9d=68 9e=ff 9f=ff
> a0=ff a1=ff a2=ff a3=ff a4=ff a5=ff a6=ff a7=ff a8=f5 ae=ff af=ff
> b1=04 b2=30 b3=30 b4=30 b5=30 b6=30 b7=30 b8=30 b9=30 ba=30 bb=89
> bc=89 bd=89 be=89 bf=89 c0=89 c1=89 c2=89 c3=01 c4=01 c5=7f c6=ff
> c9=ff ca=ff cb=ff cc=ff cd=ff ce=ff cf=ff d1=46 d2=46 d3=46 d4=46
> d6=f0 d7=ff d8=80 d9=01 da=80 db=01 dc=80 dd=01 de=80 df=01 e0=bb
> e1=c0 e2=82 e3=ff e4=80 e5=06 e6=fe e7=12 e8=12 e9=12 ea=c8 eb=60
> ec=ff ed=ff ee=ff ef=ff f6=60 f7=80 f8=1b fa=ff fd=10
> piixpm0: exec: op 1, addr 0x4b, cmdlen 1, len 1, flags 0x08: timeout,
> status 0x9
> pciide2 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
> atapiscsi0 at pciide2 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable
> cd0(pciide2:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 0
> pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
> ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01:
> apic 2 int 10 (irq 10), version 1.0, legacy support
> ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01:
> apic 2 int 10 (irq 10), version 1.0, legacy support
> ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01:
> apic 2 int 10 (irq 10)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
> vga1 at pci0 dev 5 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0:
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> pctr: user-level cycle counter enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matches BIOS drive 0x81
> dkcsum: wd1 matches BIOS drive 0x80
> root on wd1a swap on wd1b dump on wd1b
>
>
>
> OpenBSD 4.2 (GENERIC.MP) #1378: Tue Aug 28 10:48:58 MDT 2007
> deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 3220762624 (3071MB)
> avail mem = 3112398848 (2968MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfbcf0 (50 entries)
> bios0: vendor American Megatrends Inc. version "080011 " date 03/01/2007
> bios0: Supermicro H8SSL-I2
> acpi0 at mainbus0: rev 2
> acpi0: tables DSDT FACP APIC OEMB
> acpitimer at acpi0 not configured
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+, 2992.91 MHz
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: apic clock running at 199MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+, 2992.50 MHz
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> 64b/line 16-way L2 cache
> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 16 pins
> ioapic1 at mainbus0 apid 3 pa 0xfec01000, version 11, 16 pins
> ioapic2 at mainbus0 apid 4 pa 0xfec02000, version 11, 16 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (P0P1)
> acpiprt2 at acpi0: bus 2 (P1P2)
> acpicpu at acpi0 not configured
> acpicpu at acpi0 not configured
> acpibtn at acpi0 not configured
> acpibtn at acpi0 not configured
> pci0 at mainbus0 bus 0: configuration mode 1
> ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
> pci2 at ppb1 bus 2
> bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
> (0x2100): apic 3 int 8 (irq 9), address 00:30:48:5e:6d:f6
> brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
> (0x2100): apic 3 int 9 (irq 5), address 00:30:48:5e:6d:f7
> brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> pciide0 at pci1 dev 14 function 0 "ServerWorks HT-1000 SATA" rev 0x00: DMA
> pciide0: using apic 2 int 11 (irq 11) for native-PCI interrupt
> pciide0: port 0: device present, speed: 1.5Gb/s
> wd0 at pciide0 channel 0 drive 0:
> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> pciide0: port 1: device present, speed: 1.5Gb/s
> wd1 at pciide0 channel 1 drive 0:
> wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> pciide0: port 2: PHY offline
> pciide0: port 3: PHY offline
> pciide1 at pci1 dev 14 function 1 "ServerWorks HT-1000 SATA" rev 0x00
> piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
> iic0 at piixpm0
> iic0: addr 0x2f 00=80 05=a8 06=ff 07=a0 08=ff 09=64 0a=64 0b=5e 0c=73
> 0d=5c 0e=7b 0f=12 10=b1 11=2f 13=ff 14=22 15=6f 16=d0 17=7a 18=d0
> 19=d0 1a=bf 1b=03 1c=21 1d=9b 1e=80 1f=80 20=1d 21=51 22=01 23=0f
> 25=0f 27=0f 29=0f 2b=0f 3b=ff 3c=ff 3d=ff 3e=ff 3f=ff 40=09 44=40
> 46=f7 47=ff 48=ff 49=7f 4a=3f 4b=02 4d=7c 50=1e 51=02 52=01 58=80
> 59=01 5c=03 5e=55 5f=03 60=ca 61=87 62=ca 63=87 64=ff 66=ff 67=ff
> 68=3f 6a=2b 6b=18 6c=7c 6d=65 6e=e3 6f=b9 70=8a 71=70 72=e5 73=bb
> 74=e5 75=bb 76=e3 77=b9 78=48 79=43 7a=48 7b=43 7c=48 7d=5f 7e=55
> 7f=50 80=64 81=5f 82=55 83=50 84=64 85=5f 86=55 87=50 88=46 89=41
> 8a=55 8b=50 8c=64 8d=5f 8e=55 8f=50 90=07 91=68 92=07 93=68 94=07
> 95=68 96=07 97=68 98=07 99=68 9a=07 9b=68 9c=07 9d=68 9e=ff 9f=ff
> a0=ff a1=ff a2=ff a3=ff a4=ff a5=ff a6=ff a7=ff a8=f5 ae=ff af=ff
> b1=04 b2=30 b3=30 b4=30 b5=30 b6=30 b7=30 b8=30 b9=30 ba=30 bb=89
> bc=89 bd=89 be=89 bf=89 c0=89 c1=89 c2=89 c3=01 c4=01 c5=7f c6=ff
> c9=ff ca=ff cb=ff cc=ff cd=ff ce=ff cf=ff d1=46 d2=46 d3=46 d4=46
> d6=f0 d7=ff d8=80 d9=01 da=80 db=01 dc=80 dd=01 de=80 df=01 e0=bb
> e1=c0 e2=82 e3=ff e4=80 e5=06 e6=fe e7=12 e8=12 e9=12 ea=c8 eb=60
> ec=ff ed=ff ee=ff ef=ff f6=60 f7=80 f8=1b fa=ff fd=10
> piixpm0: exec: op 1, addr 0x4b, cmdlen 1, len 1, flags 0x08: timeout,
> status 0x9
> pciide2 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
> atapiscsi0 at pciide2 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable
> cd0(pciide2:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 0
> pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
> ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01:
> apic 2 int 10 (irq 10), version 1.0, legacy support
> ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01:
> apic 2 int 10 (irq 10), version 1.0, legacy support
> ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01:
> apic 2 int 10 (irq 10)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
> vga1 at pci0 dev 5 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0:
> spkr0 at pcppi0
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> dkcsum: wd0 matches BIOS drive 0x80
> dkcsum: wd1 matches BIOS drive 0x81
> root on wd0a swap on wd0b dump on wd0b
>
>
> greetings,
> knitti
Previous message: [thread] [
date
] [
author
]
Next message: [
thread
] [
date
] [
author
]
Messages in current thread:
all kernels except i386 MP high cpu in interrupt -- was: 4.2...
, knitti
, (Fri Oct 12, 6:21 am)
Re: all kernels except i386 MP high cpu in interrupt -- was:...
, knitti
, (Fri Oct 12, 6:22 am)
Navigation
Create content
Mailing list archives
Recent posts
Popular discussions
linux-kernel
:
Greg Kroah-Hartman
[PATCH 001/196] Chinese: Add the known_regression URI to the HOWTO
Tarkan Erimer
Re: Dual-Licensing Linux Kernel with GPL V2 and GPL V3
James Bottomley
Re: Integration of SCST in the mainstream Linux kernel
Robin Lee Powell
NFS hang + umount -f: better behaviour requested.
git
:
linux-netdev
:
David Miller
[GIT]: Networking
Jarek Poplawski
[PATCH] pkt_sched: Destroy gen estimators under rtnl_lock().
Natalie Protasevich
[BUG] New Kernel Bugs
Gerrit Renker
[PATCH 18/37] dccp: Support for Mandatory options
openbsd-misc
:
Colocation donated by:
Who's online
There are currently
2 users
and
831 guests
online.
Online users
ernestot1
alpha_one_x86
Syndicate
