> > > > It appears that OGD1 will be PCI-X for some reason.  I hope this doesn't
quoted text
> > > > carry over into OGC1.
> > >
> > > if the PCI-X is properly done, it should be compatible with standard 32
> > > bits PCI
> >
> > But not a PCI 64 bit slot?
> 
> It is 64-bit, intended to run at 133MHz.

Upon further investigation, it looks like PCI-X uses the same connector
as PCI 64 bit, aka PCI wide.  Assuming these are compatable, then never mind.
I was thinking the connectors were different.  Sorry.

quoted text
> > Looks pretty long, are physical dimensions available?
> 
> Well, I don't have them right off... they're standard for PCI-64, but
> that probably doesn't tell you anything.

I mean the maximum length of the card, not the connector.
_______________________________________________
Open-graphics mailing list
Open-graphics@duskglow.com
http://lists.duskglow.com/mailman/listinfo/open-graphics
List service provided by Duskglow Consulting, LLC (www.duskglow.com)