On Thu, 2010-05-20 at 10:08 -0700, Krzysztof Olędzki wrote:
quoted text > Hello,
>
> I would like to connect a dual port SFP+ NetXtreme II BCM57711
> 10-Gigabit NIC to a HP J9309A ProCurve 4-Port 10GbE SFP+ zl Module
> using a HP ProCurve 10-GbE SFP+ 7m Direct Attach Cable (J9285B).
>
> Unfortuantely, it does not work. :( After connecting the switch and
> the server together and loading the bnx2x module the switch logs:
>
> I 05/20/10 18:32:23 ports: port E4 is Blocked by STP
> I 05/20/10 18:32:23 ports: port E4 is now on-line
>
> Here is the dmesg output from the server:
>
> Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.1-5 (2009/11/09)
> bnx2x 0000:04:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
> bnx2x 0000:04:00.0: setting latency timer to 64
> bnx2x: part number 394D4342-31373735-31314131-473331
> bnx2x: Loading bnx2x-e1h-5.2.7.0.fw
> bnx2x 0000:04:00.0: firmware: requesting bnx2x-e1h-5.2.7.0.fw
> eth4: Broadcom NetXtreme II BCM57711 XGb (A0) PCI-E x8 5GHz (Gen2) found at mem dc000000, IRQ 38, node addr 00:10:18:5f:e4:b4
> bnx2x 0000:04:00.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
> bnx2x 0000:04:00.1: setting latency timer to 64
> bnx2x: part number 394D4342-31373735-31314131-473331
> bnx2x: Loading bnx2x-e1h-5.2.7.0.fw
> bnx2x 0000:04:00.1: firmware: requesting bnx2x-e1h-5.2.7.0.fw
> eth5: Broadcom NetXtreme II BCM57711 XGb (A0) PCI-E x8 5GHz (Gen2) found at mem dd000000, IRQ 45, node addr 00:10:18:5f:e4:b6
> bnx2x 0000:04:00.0: irq 97 for MSI/MSI-X
> bnx2x 0000:04:00.0: irq 98 for MSI/MSI-X
> bnx2x 0000:04:00.0: irq 99 for MSI/MSI-X
> bnx2x 0000:04:00.0: irq 100 for MSI/MSI-X
> bnx2x 0000:04:00.0: irq 101 for MSI/MSI-X
> bnx2x 0000:04:00.0: irq 102 for MSI/MSI-X
> bnx2x: eth4: using MSI-X IRQs: sp 97 fp[0] 99 ... fp[3] 102
> ADDRCONF(NETDEV_UP): eth4: link is not ready
> bnx2x 0000:04:00.1: irq 103 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 104 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 105 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 106 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 107 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 108 for MSI/MSI-X
> bnx2x: eth5: using MSI-X IRQs: sp 103 fp[0] 105 ... fp[3] 108
> ADDRCONF(NETDEV_UP): eth5: link is not ready
> bnx2x: eth5 NIC Link is Down
> bnx2x: eth5 NIC Link is Down
>
> Loading the driver with debug mode enabled (modprobe bnx2x debug=0x20004) I got:
Thank you for this debug information! You saved one email round trip :)
However, I still need some more information about the FW version and
nvram settings. Can you please send me the output of ethtool -i and
ethtool -e? Since ethtool -e is quite long, it is best to send it as an
attached file.
quoted text >
> bnx2x 0000:04:00.1: irq 103 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 104 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 105 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 106 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 107 for MSI/MSI-X
> bnx2x 0000:04:00.1: irq 108 for MSI/MSI-X
> bnx2x: eth5: using MSI-X IRQs: sp 103 fp[0] 105 ... fp[3] 108
> [bnx2x_nic_load:7524(eth5)]pmf 1
> [bnx2x_link_reset:6171(eth5)]Resetting the link of port 1
> [bnx2x_set_led:5804(eth5)]bnx2x_set_led: port 1, mode 0
> [bnx2x_set_led:5806(eth5)]speed 0x0, hw_led_mode 0x1
> [bnx2x_stats_init:4597(eth5)]port_stx 0xa72f4 func_stx 0x0
> [bnx2x_phy_init:5966(eth5)]Phy Initialization started
> [bnx2x_phy_init:5968(eth5)]req_speed 10000, req_flowctrl 0
> [bnx2x_emac_init:255(eth5)]EMAC reset reg is 1024
> [bnx2x_phy_deassert:534(eth5)]bnx2x_phy_deassert:XGXS
> [bnx2x_phy_init:6140(eth5)]Phy address = 0x1
> [bnx2x_ext_phy_reset:2092(eth5)]Port 1: bnx2x_ext_phy_reset
> [bnx2x_calc_ieee_aneg_adv:1383(eth5)]ieee_fc = 0x1a0
> [bnx2x_ext_phy_init:3672(eth5)]control reg 0x2040 (after 0 ms)
> [bnx2x_ext_phy_init:4136(eth5)]Initializing BCM8727
> [bnx2x_ext_phy_init:4285(eth5)]Setting TX_CTRL1 0xc000,TX_CTRL2 0x40
> [bnx2x_link_int_enable:5338(eth5)]enabled XGXS interrupt
> [bnx2x_link_int_enable:5345(eth5)]enabled external phy int
> [bnx2x_link_int_enable:5366(eth5)]port 1, is_xgxs 1, int_status 0x0
> [bnx2x_link_int_enable:5370(eth5)] int_mask 0x3c8001, MI_INT 1, SERDES_LINK 0
> [bnx2x_link_int_enable:5373(eth5)] 10G 0, XGXS_LINK 0
> [bnx2x_stats_handle:4469(eth5)]state 0 -> event 3 -> state 0
> [bnx2x_link_update:6375(eth5)]port 1, XGXS?1, int_status 0x0
> [bnx2x_link_update:6383(eth5)]int_mask 0x0 MI_INT 1, SERDES_LINK 0
> [bnx2x_link_update:6387(eth5)] 10G 0, XGXS_LINK 0
> [bnx2x_ext_phy_is_link_up:4809(eth5)]8727 RX_ALARM_STATUS 0x439
> ADDRCONF(NETDEV_UP): eth5: link is not ready
> [bnx2x_ext_phy_is_link_up:4819(eth5)]8727 LASI status 0x6
> [bnx2x_8727_handle_mod_abs:4622(eth5)]MOD_ABS indication show module is present
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM
> [bnx2x_8727_handle_mod_abs:4660(eth5)]SFP+ module is not initialized
> [bnx2x_8727_handle_mod_abs:4664(eth5)]8727 RX_ALARM_STATUS 0x438
> [bnx2x_ext_phy_is_link_up:4916(eth5)]Tx is disabled
> [bnx2x_link_settings_status:1958(eth5)]phy link down
> [bnx2x_link_settings_status:1976(eth5)]gp_status 0x208 phy_link_up 0 line_speed 2710
> [bnx2x_link_settings_status:1980(eth5)]duplex 1 flow_ctrl 0x400 autoneg 0x0
> [bnx2x_link_settings_status:1981(eth5)]link_status 0x0
> [bnx2x_update_link_down:6285(eth5)]Port 1: Link is down
> [bnx2x_set_led:5804(eth5)]bnx2x_set_led: port 1, mode 0
> [bnx2x_set_led:5806(eth5)]speed 0x0, hw_led_mode 0x1
> bnx2x: eth5 NIC Link is Down
> [bnx2x_stats_handle:4469(eth5)]state 0 -> event 3 -> state 0
> [bnx2x_link_update:6375(eth5)]port 1, XGXS?1, int_status 0x0
> [bnx2x_link_update:6383(eth5)]int_mask 0x0 MI_INT 1, SERDES_LINK 0
> [bnx2x_link_update:6387(eth5)] 10G 0, XGXS_LINK 0
> [bnx2x_ext_phy_is_link_up:4809(eth5)]8727 RX_ALARM_STATUS 0x41c
> [bnx2x_ext_phy_is_link_up:4819(eth5)]8727 LASI status 0x2
> [bnx2x_ext_phy_is_link_up:4916(eth5)]Tx is disabled
> [bnx2x_link_settings_status:1958(eth5)]phy link down
> [bnx2x_link_settings_status:1976(eth5)]gp_status 0x208 phy_link_up 0 line_speed 0
> [bnx2x_link_settings_status:1980(eth5)]duplex 1 flow_ctrl 0x400 autoneg 0x0
> [bnx2x_link_settings_status:1981(eth5)]link_status 0x0
> [bnx2x_update_link_down:6285(eth5)]Port 1: Link is down
> [bnx2x_set_led:5804(eth5)]bnx2x_set_led: port 1, mode 0
> [bnx2x_set_led:5806(eth5)]speed 0x0, hw_led_mode 0x1
> bnx2x: eth5 NIC Link is Down
>
> # uname -r
> 2.6.33.3
>
> Is there something I can do to fix this? Like for example kernel/driver or the firmware upgrade?
>
> Best regards,
>
> Krzysztof Olędzki
>
I assume it is the same when you unplug the module and insert it again
when the driver is already up and running, right? I also assumed you
verified it is firmly plugged in (no offense, bug I had to ask...)
Eilon
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to
majordomo@vger.kernel.org
More majordomo info at
http://vger.kernel.org/majordomo-info.html
