On Wednesday 28 April 2010, Scott Feldman wrote:
quoted text
> On 4/28/10 6:13 AM, "Arnd Bergmann" <arnd@arndb.de> wrote:
> > 
> > We will need a few more options to cover draft VDP in addition to the protocol
> > your NIC is using. I still think it's possible to use the same interface
> > for both, but the differences are obviously showing.
> > 
> > The missing bits that I can see so far are:
> > 
> > - You only have 'get' and 'set'. We will also need a 'unset' or 'delete'
> >   option in order to get rid of a port profile association.
> 
> That's there in my patch.  If you don't specify anything after port-profile
> keyword, it's an unset.  See extra "[" and "]" above.  Will that work for
> you?

Well, this won't work if you want to have multiple slave interfaces connected
to a single master and record the port profile in the master.

quoted text
> > - VDP has three different ways to 'set' a port profile: 'associate',
> >   'pre-associate with resource reservation' and 'pre-associate without
> >   resource reservation'. This could become an extra option flag.
> 
> Ok, let's add an option flag bit field.  I'm not sure how that looks from
> the iproute2 cmd line.  Would you take a stab at defining these?
> 
> > - Instead of a port profile name, VDP specifies a tuple like
> >    struct vsi_associate {
> > unsigned char VSI_Mgr_ID;       /* VSI manager ID */
> > unsigned char VSI_Type_ID[3];   /* 24 bit VSI Type ID */
> > unsigned char VSI_Type_Version; /* VSI Type version */
> >    };
> >    I'm not sure how to deal with that best, but there needs to be
> >    some parsing of these numbers.
> 
> PORT-PROFILE above is a u8* array.  You could decide to encode the tuple in
> a string, e.g. "1.12345.1", and let the receiver parse it?  Or pack it in as
> binary.  PORT-PROFILE for us is just a string identifier, e.g. "corp-net-10"
> or "joes-garage".

I guess either one would work, but I'd prefer to do the parsing at
the front-end and passing it as binary to avoid libvirt encoding
it as ascii and lldpad (or the kernel) parsing the data again, which
would be more error-prone.

Another alternative would be to make this a distinct argument (or even
three of them) and only allow passing one or the other. That would
also implicitly choose the protocol (VDP or port extender).
 
quoted text
> > - VDP requires a vlan ID to be part of the association, in addition to
> >   the MAC address. In theory, we could have multiple tuples of MAC+VLAN
> >   addresses, but we can probably just associate each tuple separately
> >   and ignore that part of the standard.
> 
> I don't think I have enough information to spec this out for this item.
> Would you take a stab at how this would look in the struct and how it would
> look from the iproute2 cmd line?  (Note I'm using iproute2 cmd line for
> illustrative purposes, but the sender of the msg could be something like
> libvirt).

Just adding the VID would be done I wrote at the end of my last mail.
Adding multiple VLAN/MAC pairs is probably not necessary if we can
do multiple associations.

quoted text
> > - we have a set of possible error conditions that can be returned by
> >   the switch (invalid format, insufficient resources, unknown VTID,
> >   VTID violation, VTID verison violation, out of sync). It should be
> >   possible to return each of these to the user with 'get'.
> 
> There is a status code in the get cmd as defined in my patch.  I have it as
> a u8 with some enum codes.  Can we add to the enum code list?  Or do you
> want to return a full string?  Our requirements are we return one of:
> {success, error, in-progress}.

enum is fine, but I think it would be good to use the same numbers
as the VDP standard where possible. Maybe we could use two bytes,
the first one for the overall status (success, error, in progress)
and the second one for the specific error (as above)?

quoted text
> >> Since we're using netlink sockets, the receiver of the RTM_SETLINK msg can
> >> be in kernel- or user-space.  For kernel-space recipient, rtnetlink.c, the
> >> new ndo_set_port_profile netdev op is called to set the port-profile.
> >> User-space recipients can decide how they propagate the msg to the switch.
> >> There is also a RTM_GETLINK cmd to to return port-profile setting of an
> >> interface and to also return the status of the last port-profile.
> > 
> > More on a stylistic note, I'm not convinced that using RTM_SETLINK/GETLINK
> > is the right interface for this, unlike the 'ip link set DEV vf ...' stuff,
> > because it seems to suggest that this is an option of the adapter itself.
> > I actually liked the iovnl family better in this regard, because it kept
> > the protocols separate.
> 
> Wait a second...I abandoned iovnl and moved to if_link based on suggestions
> from you and others.  On 4/21/10 2:13 PM, "Arnd Bergmann" <arnd@arndb.de>
> wrote:
>
>    > Right. My preference would probably be make these a subcategory of
>    > the if_link, and use the existing RTM_NEWLINK/RTM_DELLINK commands.
> 
> My latest with if_link fits best with what we're trying to do with enic.

Sorry for the misunderstanding, I was probably not clear enough. This
was a side-discussion about how we should create and destroy virtual
interfaces on IOV capable adapters. My point was that this should be
_separate_ from the port profile association. For creating a
macvlan/macvtap device, we already use RTM_NEWLINK, which does not
associate the device with the switch, so I suggested that for creating
a virtual interface with hardware support we should do the same thing,
but leave the association somewhere else. iovnl sounds like a good
place for that.

quoted text
> Note the current interface is per netdev interface (a link), where the
> netdev interface could be the adapter itself or any other netdev such as
> macvlan, bond, etc.

We certainly missed each others arguments here, see my other mail.
In order to do the port profile association from software, we
definitely need the master device (nic, PF, bond, bridge, ...) so
we have a way to communicate to the switch, not the slave device
(VF, tap, macvtap, ...) that we are trying to associate.

quoted text
> > What I could imagine to unify this is something like
> > 
> >    ip port_profile set DEVICE [ { pre_associate | pre_associate_rr } ]
> >                               { name PORT-PROFILE | vsi MGR:VTID:VER }
> >                                     mac LLADDR
> >    [ vlan VID ]
> >                                     [ host_uuid HOST_UUID ]
> >                                     [ client_uuid CLIENT_UUID ]
> >                                     [ client_name CLIENT_NAME ]
> >    ip port_profile del DEVICE [ mac LLADDR [ vlan VID ] ]
> >    ip port_profile show DEVICE
> 
> If we want to break port_profile out into it's own ip cmd, I'm ok with that.
> What you have above would work for enic.  The netdev would have these ops:
> 
>     ndo_set_port_profile
>     ndo_get_port_profile
>     ndo_del_port_profile
> 
> Sounds OK?

That sounds good.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html