On Thu, 29 Jan 2009, Matt Carlson wrote:

quoted text
> Can you apply the following test patch and see if it helps?  The patch
> does two things.  First, it enables a bit which should restore firmware
> communication.  If that fixes the problem, then let me know and I'll
> spin a proper patch.
> 
> In the event that it doesn't work, the patch goes on to test the memory
> mapping by simply printing the register value at offset 0x0.  The value
> should be the device's vendor ID and device ID.  Please post the
> results so that I can verify it.
> 
> 
> diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
> index 8b3f846..39fce42 100644
> --- a/drivers/net/tg3.c
> +++ b/drivers/net/tg3.c
> @@ -7227,6 +7227,11 @@ static int tg3_init_hw(struct tg3 *tp, int reset_phy)
>  {
>  	tg3_switch_clocks(tp);
>  
> +	printk( KERN_NOTICE "%s: Reg value at offset 0x0 is 0x%x\n",
> +		tp->dev->name, tr32(0x0) );
> +
> +	tw32(MEMARB_MODE, tr32(MEMARB_MODE) | MEMARB_MODE_ENABLE);
> +
>  	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
>  
>  	return tg3_reset_hw(tp, reset_phy);
> 

Hi Matt,

Thanks for the patch. It didn't help with resume - but below is the 
output after patching, let me know if you need more details.

( Looks like 0xffffffff is invalid/corrupted device id /vendor id? )

[  163.856001] tg3 0000:0e:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20040000)                                                                                                            
[  163.856001] tg3 0000:0e:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)                                                                                                                  
[  163.856001] tg3 0000:0e:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)                                                                                                         

[snip]

[  164.450277] pcieport-driver 0000:1e:00.0: setting latency timer to 64
[  164.450415] pcieport-driver 0000:1e:01.0: setting latency timer to 64
[  164.450493] tg3 0000:0e:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20040000)
[  164.451110] serial 00:08: activated

[snip]

[  168.913863] Restarting tasks ... done.
[  170.332953] tg3 0000:0e:00.0: wake-up capability disabled by ACPI
[  170.332960] tg3 0000:0e:00.0: PME# disabled
[  170.333047] tg3 0000:0e:00.0: irq 54 for MSI/MSI-X
[  170.333250] eth0: Reg value at offset 0x0 is 0xffffffff
[  170.394281] [drm] Loading R500 Microcode
[  170.394330] [drm] Num pipes: 1
[  171.726650] tg3: eth0: No firmware running.
[  183.119745] ADDRCONF(NETDEV_UP): eth0: link is not ready


Parag
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html