This patch fixes EMAC soft reset on 460EX/GT when no external clock is
available.
Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
---
arch/powerpc/include/asm/dcr-regs.h | 4 ++++
drivers/net/ibm_newemac/core.c | 18 ++++++++++++++++++
drivers/net/ibm_newemac/core.h | 5 +++++
3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
index 29b0ece..f15296c 100644
--- a/arch/powerpc/include/asm/dcr-regs.h
+++ b/arch/powerpc/include/asm/dcr-regs.h
@@ -68,6 +68,10 @@
#define SDR0_UART3 0x0123
#define SDR0_CUST0 0x4000
+/* SDRs (460EX/460GT) */
+#define SDR0_ETH_CFG 0x4103
+#define SDR0_ETH_CFG_ECS 0x00000100 /* EMAC int clk source */
+
/*
* All those DCR register addresses are offsets from the base address
* for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 2e720f2..f6871ba 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -130,6 +130,7 @@ static inline void emac_report_timeout_error(struct emac_instance *dev,
const char *error)
{
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
+ EMAC_FTR_460EX_PHY_CLK_FIX |
EMAC_FTR_440EP_PHY_CLK_FIX))
DBG(dev, "%s" NL, error);
else if (net_ratelimit())
@@ -351,10 +352,24 @@ static int emac_reset(struct emac_instance *dev)
emac_tx_disable(dev);
}
+#ifdef CONFIG_PPC_DCR_NATIVE
+ /* Enable internal clock source */
+ if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_ETH_CFG,
+ 0, SDR0_ETH_CFG_ECS << dev->cell_index);
+#endif
+
out_be32(&p->mr0, EMAC_MR0_SRST);
while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
--n;
+#ifdef CONFIG_PPC_DCR_NATIVE
+ /* Enable external clock source */
+ if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_ETH_CFG,
+ ...
