Francois Romieu <romieu <at> fr.zoreil.com> writes:
I'm running a git version just before 2.6.27-rc2 and while the card
worked fine in 2.6.26, after a resume from suspend to ram I now get:
[ 8367.073701] r8169 0000:01:00.0: restoring config space at offset 0x1
(was 0x100007, writing 0x100407)
[ 8367.073863] sd 2:0:0:0: [sda] Starting disk
[ 8367.077786] r8169: eth0: link up
[ 8367.265653] ata4.01: configured for UDMA/100
[ 8371.953804] ata3.00: configured for UDMA/133
[ 8371.964803] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 8371.964833] sd 2:0:0:0: [sda] Write Protect is off
[ 8371.964836] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8371.964883] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 8371.975538] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8371.975545] pci 0000:00:02.0: setting latency timer to 64
[ 8371.977770] PM: Finishing wakeup.
[ 8371.977772] Restarting tasks ... done.
[ 8397.700577] NETDEV WATCHDOG: eth0 (r8169): transmit timed out
[ 8397.700590] ------------[ cut here ]------------
[ 8397.700592] WARNING: at
/home/indan/src/git/linux-2.6/net/sched/sch_generic.c:219
dev_watchdog+0xfa/0x14a()
[ 8397.700594] Modules linked in: i915 drm
[ 8397.700600] Pid: 0, comm: swapper Not tainted 2.6.27-rc1 #8
[ 8397.700602]
[ 8397.700602] Call Trace:
[ 8397.700604] <IRQ> [<ffffffff80235512>] warn_on_slowpath+0x51/0x77
[ 8397.700612] [<ffffffff80236043>] printk+0x4e/0x56
[ 8397.700615] [<ffffffff804cda7d>] _spin_lock_irqsave+0x18/0x3a
[ 8397.700619] [<ffffffff8023dd61>] lock_timer_base+0x26/0x4c
[ 8397.700622] [<ffffffff804cdd80>] _spin_unlock_irqrestore+0x2d/0x39
[ 8397.700625] [<ffffffff8023deee>] __mod_timer+0xbb/0xcd
[ 8397.700628] [<ffffffff8022869a>] calc_delta_fair+0x1a/0x34
[ 8397.700632] [<ffffffff8024448a>] queue_delayed_work_on+0xaa/0xba
[ 8397.700635] [<ffffffff8047d14c>] dev_watchdog+0x0/0x14a
[ 8397.700637] [<ffffffff8047d246>] dev_watchdog+0xfa/0x14a
[ 8397.700641] [<ffffffff8024916e>] hrtimer_hres_active+0x1a/0x30
[ 8397.700643] [<ffffffff8023d806>] run_timer_softirq+0x16e/0x1e9
[ 8397.700647] [<ffffffff8024c478>] getnstimeofday+0x33/0x6e
[ 8397.700651] [<ffffffff80239e88>] __do_softirq+0x60/0xab
[ 8397.700654] [<ffffffff8020c73c>] call_softirq+0x1c/0x28
[ 8397.700657] [<ffffffff8020e981>] do_softirq+0x2c/0x6b
[ 8397.700660] [<ffffffff80239d83>] irq_exit+0x36/0x8d
[ 8397.700664] [<ffffffff8021c014>] smp_apic_timer_interrupt+0x7b/0x86
[ 8397.700667] [<ffffffff8020c186>] apic_timer_interrupt+0x66/0x70
[ 8397.700668] <EOI> [<ffffffff80211af2>] read_tsc+0x0/0x1c
[ 8397.700674] [<ffffffff80212380>] mwait_idle+0x35/0x38
[ 8397.700677] [<ffffffff80209e94>] cpu_idle+0x76/0xbc
[ 8397.700679]
[ 8397.700680] ---[ end trace 8c87f3ce26ef3799 ]---
[ 8397.726489] r8169: eth0: link up
[ 8409.700338] NETDEV WATCHDOG: eth0 (r8169): transmit timed out
[ 8409.704926] r8169: eth0: link up
[ 8421.700095] NETDEV WATCHDOG: eth0 (r8169): transmit timed out
[ 8421.727525] r8169: eth0: link up
[ 8433.699859] NETDEV WATCHDOG: eth0 (r8169): transmit timed out
[ 8433.704200] r8169: eth0: link up
Earlier in boot I have:
[ 0.205570] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.205622] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.205678] r8169 0000:01:00.0: setting latency timer to 64
[ 0.206002] eth0: RTL8101e at 0xffffc2000002a000, 00:19:66:5c:94:a7, XID
34200000 IRQ 221
Greetings,
Indan
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to
majordomo@vger.kernel.org
More majordomo info at
http://vger.kernel.org/majordomo-info.html
