> I am experiencing a system hang as soon as pull the cable out of eth0.
> Kernel version is unmodified latest -git
> (v2.6.27-rc2/796aadeb1b2db9b5d463946766c5bbfd7717158c) and my network
> driver is 8139too (for both eth0 and eth1).
>
> I am running netconsole on eth0 (the interface which I disconnect).
>
> A bit of serial console (ttyS0) output:
>
> Linux version 2.6.27-rc2-00325-g796aade (
vegardno@ben.ifi.uio.no) (gcc
> version 4.1.2 20071124 (Red Hat 4.1.2-42)) #2 SMP PREEMPT Mon Aug 11
> 18:29:29 CEST 2008
> ...
> Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb
> console=tty0 console=ttyS0,115200 ignore_loglevel debug initcall_debug
> nmi_watchdog=1 panic=30 sysrq_always_enabled
> netconsole=@192.168.0.172/,@192.168.0.11/ 3
> ...
> calling rtl8139_init_module+0x0/0x20
> 8139too Fast Ethernet driver 0.9.28
> 8139too 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> eth0: RealTek RTL8139 at 0xf881ac00, 00:10:a7:09:48:52, IRQ 18
> eth0: Identified 8139 chip type 'RTL-8139C'
> 8139too 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> eth1: RealTek RTL8139 at 0xf881c000, 00:16:ec:ee:ad:b9, IRQ 21
> eth1: Identified 8139 chip type 'RTL-8100B/8139D'
> initcall rtl8139_init_module+0x0/0x20 returned 0 after 37 msecs
> ...
> eth0: link down
> [hangs here; num lock + scroll lock flashing]
> [reboots automatically, probably due to NMI watchdog?]
>
> There is no detailed crash output on either tty0 or ttyS0. Keyboard
> sysrq does not work.
>
> Is it expected that pulling the plug on an interface running
> netconsole should hang the machine?
