* Vegard Nossum <vegard.nossum@gmail.com> wrote:

quoted text
> On Mon, Jul 21, 2008 at 12:50 PM, Ingo Molnar <mingo@elte.hu> wrote:
> > the problem is, most of the crashes dont come with any usable dump. This
> > is a laptop so netconsole is the only reliable route out - and if
> > something in networking crashes chances are that it hoses netconsole
> > before it can get anything out.
> >
> > Another thing is that i'm activating netconsole on this box via a kernel
> > boot line and from within a bzImage (to get it activated as early as
> > possible) - maybe that's a tad too early for certain initialization
> > sequences?
> >
> > I could try run tests with netconsole deactivated, if you think 
> > that's a worthwile line of probing this problem. (although that 
> > would make me do blind tests in essence - having kernel log output 
> > is really essential.)
> 
> How about posting your custom patches for public review? :-D

I changed nothing in that area - being able to enable the netconsole 
like that has been a years-old feature. Otherwise it's just tip/master, 
but the weirdnesses were reproducible under plain linus/master as well.

quoted text
> (There was recently an odd case of kzalloc() succeeding even though it 
> was called before the slab caches were initialized -- and it only 
> generated a warning about irqs-on happening too early. I just mean to 
> say that it _can_ happen. On another machine, it crashed 
> spectacularly. I guess you're not enabling the netconsole before slab 
> allocator is up?)

if i had any changes in that area i'd have declared them. Find below the 
full bootlog of the last crash - can you see any init order weirdness in 
it?

Btw., i disabled netconsole now and got 3 successful bootups in a row. 
(which is still not significant statistically - i had a series of 40 
bootups in a row before. Then again i had like 5 failures in a row 
earlier this morning, before disabling netconsole.)

Btw. #2, in the log below you can see this partial line:

 initcall pm_qos_power_init+0x0/0x54Linux version 2.6.26-tip (mingo@europe) (gcc version 4.2.2) #3261 SMP Mon Jul 21 11:17:45 CEST 2008

That was a previous bootup with another failure but which came without 
any log output.

Hey, if you find this report frustrating, dont worry, i almost never 
report easy bugs - i can fix them just fine ;-)

	Ingo

--------------->
initcall pm_qos_power_init+0x0/0x54Linux version 2.6.26-tip (mingo@europe) (gcc version 4.2.2) #3261 SMP Mon Jul 21 11:17:45 CEST 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
 BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
 BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
 BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
debug: ignoring loglevel setting.
using polling idle threads.
using polling idle threads.
last_pfn = 0x7f6e0 max_arch_pfn = 0x1000000
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
kernel direct mapping tables up to 38000000 @ 7000-c000
NX (Execute Disable) protection: active
DMI present.
ACPI: RSDP 000F68A0, 0024 (r2 LENOVO)
ACPI: XSDT 7F6E631F, 0074 (r1 LENOVO TP-79        1020  LTP        0)
ACPI: FACP 7F6E6400, 00F4 (r3 LENOVO TP-79        1020 LNVO        1)
ACPI Warning (tbfadt-0447): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
ACPI: DSDT 7F6E65E7, C765 (r1 LENOVO TP-79        1020 MSFT  100000E)
ACPI: FACS 7F6F4000, 0040
ACPI: SSDT 7F6E65B4, 0033 (r1 LENOVO TP-79        1020 MSFT  100000E)
ACPI: ECDT 7F6F2D4C, 0052 (r1 LENOVO TP-79        1020 LNVO        1)
ACPI: TCPA 7F6F2D9E, 0032 (r2 LENOVO TP-79        1020 LNVO        1)
ACPI: APIC 7F6F2DD0, 0068 (r1 LENOVO TP-79        1020 LNVO        1)
ACPI: MCFG 7F6F2E38, 003E (r1 LENOVO TP-79        1020 LNVO        1)
ACPI: HPET 7F6F2E76, 0038 (r1 LENOVO TP-79        1020 LNVO        1)
ACPI: BOOT 7F6F2FD8, 0028 (r1 LENOVO TP-79        1020  LTP        1)
ACPI: SSDT 7F6E58DA, 0507 (r1 LENOVO TP-79        1020 INTL 20050513)
ACPI: SSDT 7F6E5702, 01D8 (r1 LENOVO TP-79        1020 INTL 20050513)
Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used
Entering add_active_range(0, 0x100, 0x38000) 1 entries of 256 used
896MB LOWMEM available.
  mapped low ram: 0 - 38000000
  low ram: 00000000 - 38000000
  bootmap 00009000 - 00010000
(8 early reservations) ==> bootmem [0000000000 - 0038000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 0000ccbc50]    TEXT DATA BSS ==> [0000100000 - 0000ccbc50]
  #4 [0000ccc000 - 0000d18000]    INIT_PG_TABLE ==> [0000ccc000 - 0000d18000]
  #5 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #7 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x00038000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x00038000
On node 0 totalpages: 229279
free_area_init_node: node 0, pgdat c081bf80, node_mem_map c1000000
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3943 pages, LIFO batch:0
  Normal zone: 3080 pages used for memmap
  Normal zone: 222200 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Bus #0 is ISA
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
PERCPU: Allocating 332592 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 226143
Kernel command line: root=/dev/sda1 console=tty profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=1 relaxed_check=1 netconsole=4444@10.0.1.15/eth0,4444@10.0.1.16/00:19:d1:01:f5:55 nmi_watchdog=2 idle=poll no_hz=off nmi_watchdog=0 nolapic_timer hpet=disable idle=mwait idle=poll nopat
kernel profiling enabled (shift: 0)
debug: sysrq always enabled.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0941000 soft=c0939000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Detected 1828.742 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1088 kB
 per task-struct memory footprint: 2688 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
                                 | spin |wlock |rlock |mutex | wsem | rsem |
  --------------------------------------------------------------------------
                     A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                    double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                  initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |  ok  |
           recursive read-lock #2:             |  ok  |             |  ok  |
            mixed read-write-lock:             |  ok  |             |  ok  |
            mixed write-read-lock:             |  ok  |             |  ok  |
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 872052k/917504k available (4655k kernel code, 45060k reserved, 3079k data, 656k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffb8000 - 0xfffff000   ( 284 kB)
    vmalloc : 0xf8800000 - 0xfffb6000   ( 119 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0892000 - 0xc0936000   ( 656 kB)
      .data : 0xc058bc52 - 0xc088dacc   (3079 kB)
      .text : 0xc0100000 - 0xc058bc52   (4655 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 16 of 16 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3657.48 BogoMIPS (lpj=1828742)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
enabled ExtINT on CPU#0
ESR value before enabling vector: 0x00000040  after: 0x00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 1-0 not connected.
 IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
++++++++++++++++++++=_---CPU UP  1
lockdep: fixing up alternatives.
CPU 1 irqstacks, hard=c0942000 soft=c093a000
Booting processor 1/1 ip 6000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
Deasserting INIT.
Waiting for send to finish...
#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
Startup point 1.
CPU#1 (phys ID: 1) waiting for CALLOUT
Waiting for send to finish...
Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. <6>3194.05 BogoMIPS (lpj=1597026)
Stack at about f7c7efb0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
OK.
CPU1: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
CPU has booted.
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 580129 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Boot done.
Before bogomips.
Total of 2 processors activated (6851.53 BogoMIPS).
Before bogocount - setting activated=1.
khelper used greatest stack depth: 3052 bytes left
khelper used greatest stack depth: 2684 bytes left
calling  init_cpufreq_transition_notifier_list+0x0/0x18
initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 msecs
calling  net_ns_init+0x0/0x10f
net_namespace: 800 bytes
initcall net_ns_init+0x0/0x10f returned 0 after 0 msecs
calling  cpufreq_tsc+0x0/0x13
initcall cpufreq_tsc+0x0/0x13 returned 0 after 0 msecs
calling  reboot_init+0x0/0x11
initcall reboot_init+0x0/0x11 returned 0 after 0 msecs
calling  sysctl_init+0x0/0x29
initcall sysctl_init+0x0/0x29 returned 0 after 0 msecs
calling  ksysfs_init+0x0/0x96
initcall ksysfs_init+0x0/0x96 returned 0 after 0 msecs
calling  init_jiffies_clocksource+0x0/0xf
initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 msecs
calling  pm_init+0x0/0x2d
initcall pm_init+0x0/0x2d returned 0 after 0 msecs
calling  filelock_init+0x0/0x27
initcall filelock_init+0x0/0x27 returned 0 after 0 msecs
calling  init_aout_binfmt+0x0/0xf
initcall init_aout_binfmt+0x0/0xf returned 0 after 0 msecs
calling  init_misc_binfmt+0x0/0x33
initcall init_misc_binfmt+0x0/0x33 returned 0 after 0 msecs
calling  init_script_binfmt+0x0/0xf
initcall init_script_binfmt+0x0/0xf returned 0 after 0 msecs
calling  init_elf_binfmt+0x0/0xf
initcall init_elf_binfmt+0x0/0xf returned 0 after 0 msecs
calling  debugfs_init+0x0/0x41
initcall debugfs_init+0x0/0x41 returned 0 after 0 msecs
calling  securityfs_init+0x0/0x41
initcall securityfs_init+0x0/0x41 returned 0 after 0 msecs
calling  random32_init+0x0/0x3f
initcall random32_init+0x0/0x3f returned 0 after 0 msecs
calling  cpufreq_core_init+0x0/0x51
initcall cpufreq_core_init+0x0/0x51 returned 0 after 0 msecs
calling  virtio_init+0x0/0x1f
initcall virtio_init+0x0/0x1f returned 0 after 0 msecs
calling  sock_init+0x0/0x51
initcall sock_init+0x0/0x51 returned 0 after 0 msecs
calling  netpoll_init+0x0/0x11
initcall netpoll_init+0x0/0x11 returned 0 after 0 msecs
calling  netlink_proto_init+0x0/0x107
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x107 returned 0 after 0 msecs
calling  bdi_class_init+0x0/0x33
initcall bdi_class_init+0x0/0x33 returned 0 after 0 msecs
calling  kobject_uevent_init+0x0/0x3f
initcall kobject_uevent_init+0x0/0x3f returned 0 after 0 msecs
calling  pcibus_class_init+0x0/0xf
initcall pcibus_class_init+0x0/0xf returned 0 after 0 msecs
calling  pci_driver_init+0x0/0xf
initcall pci_driver_init+0x0/0xf returned 0 after 0 msecs
calling  lcd_class_init+0x0/0x3d
initcall lcd_class_init+0x0/0x3d returned 0 after 0 msecs
calling  backlight_class_init+0x0/0x3d
initcall backlight_class_init+0x0/0x3d returned 0 after 0 msecs
calling  tty_class_init+0x0/0x27
initcall tty_class_init+0x0/0x27 returned 0 after 0 msecs
calling  vtconsole_class_init+0x0/0x9a
initcall vtconsole_class_init+0x0/0x9a returned 0 after 0 msecs
calling  eisa_init+0x0/0x26
EISA bus registered
initcall eisa_init+0x0/0x26 returned 0 after 0 msecs
calling  enable_pci_io_ecs+0x0/0x2b
initcall enable_pci_io_ecs+0x0/0x2b returned 0 after 0 msecs
calling  rdc_board_setup+0x0/0x19
initcall rdc_board_setup+0x0/0x19 returned 0 after 0 msecs
calling  arch_kdebugfs_init+0x0/0x1de
initcall arch_kdebugfs_init+0x0/0x1de returned 0 after 0 msecs
calling  init_pit_clocksource+0x0/0x8f
initcall init_pit_clocksource+0x0/0x8f returned 0 after 0 msecs
calling  ffh_cstate_init+0x0/0x2c
initcall ffh_cstate_init+0x0/0x2c returned 0 after 0 msecs
calling  acpi_pci_init+0x0/0x38
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x38 returned 0 after 0 msecs
calling  init_acpi_device_notify+0x0/0x43
initcall init_acpi_device_notify+0x0/0x43 returned 0 after 0 msecs
calling  pci_arch_init+0x0/0x4a
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x4a returned 0 after 0 msecs
calling  topology_init+0x0/0x28
initcall topology_init+0x0/0x28 returned 0 after 0 msecs
calling  param_sysfs_init+0x0/0x154
initcall param_sysfs_init+0x0/0x154 returned 0 after 21 msecs
calling  pm_sysrq_init+0x0/0x16
initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 msecs
calling  readahead_init+0x0/0x2f
initcall readahead_init+0x0/0x2f returned 0 after 0 msecs
calling  init_bio+0x0/0xa6
initcall init_bio+0x0/0xa6 returned 0 after 0 msecs
calling  blk_settings_init+0x0/0x1d
initcall blk_settings_init+0x0/0x1d returned 0 after 0 msecs
calling  blk_ioc_init+0x0/0x24
initcall blk_ioc_init+0x0/0x24 returned 0 after 0 msecs
calling  genhd_device_init+0x0/0x32
initcall genhd_device_init+0x0/0x32 returned 0 after 0 msecs
calling  pci_slot_init+0x0/0x3b
initcall pci_slot_init+0x0/0x3b returned 0 after 0 msecs
calling  fbmem_init+0x0/0x73
initcall fbmem_init+0x0/0x73 returned 0 after 0 msecs
calling  acpi_init+0x0/0x21b
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
initcall acpi_init+0x0/0x21b returned 0 after 67 msecs
calling  acpi_scan_init+0x0/0xed
initcall acpi_scan_init+0x0/0xed returned 0 after 49 msecs
calling  acpi_ec_init+0x0/0x55
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
initcall acpi_ec_init+0x0/0x55 returned 0 after 0 msecs
calling  acpi_pci_root_init+0x0/0x25
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [ee100000, ee17ffff]
PCI: 0000:00:02.0 reg 14 io port: [1800, 1807]
PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [ee200000, ee23ffff]
PCI: 0000:00:02.1 reg 10 32bit mmio: [ee180000, ee1fffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f]
PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f]
PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f]
PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [ee444000, ee4443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
PCI: 0000:00:1f.2 reg 10 io port: [18d0, 18d7]
PCI: 0000:00:1f.2 reg 14 io port: [18c4, 18c7]
PCI: 0000:00:1f.2 reg 18 io port: [18c8, 18cf]
PCI: 0000:00:1f.2 reg 1c io port: [18c0, 18c3]
PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [ee444400, ee4447ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff]
PCI: 0000:02:00.0 reg 10 32bit mmio: [ee000000, ee01ffff]
PCI: 0000:02:00.0 reg 18 io port: [2000, 201f]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [ee000000, ee0fffff]
PCI: 0000:03:00.0 reg 10 32bit mmio: [edf00000, edf00fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 io port: [3000, 4fff]
PCI: bridge 0000:00:1c.1 32bit mmio: [ec000000, edffffff]
PCI: bridge 0000:00:1c.1 64bit mmio pref: [e4000000, e40fffff]
PCI: bridge 0000:00:1c.2 io port: [5000, 6fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [e8000000, e9ffffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [e4100000, e41fffff]
PCI: bridge 0000:00:1c.3 io port: [7000, 8fff]
PCI: bridge 0000:00:1c.3 32bit mmio: [ea000000, ebffffff]
PCI: bridge 0000:00:1c.3 64bit mmio pref: [e4200000, e42fffff]
PCI: 0000:15:00.0 reg 10 32bit mmio: [e4300000, e4300fff]
pci 0000:15:00.0: supports D1
pci 0000:15:00.0: supports D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 io port: [9000, cfff]
PCI: bridge 0000:00:1e.0 32bit mmio: [e4300000, e7ffffff]
PCI: bridge 0000:00:1e.0 64bit mmio pref: [e0000000, e3ffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
initcall acpi_pci_root_init+0x0/0x25 returned 0 after 43 msecs
calling  acpi_pci_link_init+0x0/0x43
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 10 msecs
calling  acpi_power_init+0x0/0x69
ACPI: Power Resource [PUBS] (on)
initcall acpi_power_init+0x0/0x69 returned 0 after 1 msecs
calling  acpi_system_init+0x0/0x167
initcall acpi_system_init+0x0/0x167 returned 0 after 0 msecs
calling  acpi_cm_sbs_init+0x0/0x7
initcall acpi_cm_sbs_init+0x0/0x7 returned 0 after 0 msecs
calling  pnp_init+0x0/0x19
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall pnp_init+0x0/0x19 returned 0 after 0 msecs
calling  pnpacpi_init+0x0/0x7b
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: parse allocated resources
pnp 00:00:   add mem 0x0-0x9ffff flags 0x1
pnp 00:00:   add mem 0xc0000-0xc3fff flags 0x0
pnp 00:00:   add mem 0xc4000-0xc7fff flags 0x0
pnp 00:00:   add mem 0xc8000-0xcbfff flags 0x0
pnp 00:00:   add mem 0xcc000-0xcffff flags 0x0
pnp 00:00:   add mem 0xd0000-0xd3fff flags 0x0
pnp 00:00:   add mem 0xd4000-0xd3fff flags 0x10000000
pnp 00:00:   add mem 0xd8000-0xd7fff flags 0x10000000
pnp 00:00:   add mem 0xdc000-0xdffff flags 0x1
pnp 00:00:   add mem 0xe0000-0xe3fff flags 0x0
pnp 00:00:   add mem 0xe4000-0xe7fff flags 0x0
pnp 00:00:   add mem 0xe8000-0xebfff flags 0x0
pnp 00:00:   add mem 0xec000-0xeffff flags 0x0
pnp 00:00:   add mem 0xf0000-0xfffff flags 0x0
pnp 00:00:   add mem 0x100000-0x7fffffff flags 0x1
pnp 00:00:   add mem 0xfec00000-0xffffffff flags 0x0
pnp 00:00:   add mem 0xfed41000-0xfed40fff flags 0x10000000
pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x188
pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: parse allocated resources
pnp 00:01:   add io  0xcf8-0xcff flags 0x1
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: parse allocated resources
pnp 00:02:   add io  0x10-0x1f flags 0x1
pnp 00:02:   add io  0x90-0x9f flags 0x1
pnp 00:02:   add io  0x24-0x25 flags 0x1
pnp 00:02:   add io  0x28-0x29 flags 0x1
pnp 00:02:   add io  0x2c-0x2d flags 0x1
pnp 00:02:   add io  0x30-0x31 flags 0x1
pnp 00:02:   add io  0x34-0x35 flags 0x1
pnp 00:02:   add io  0x38-0x39 flags 0x1
pnp 00:02:   add io  0x3c-0x3d flags 0x1
pnp 00:02:   add io  0xa4-0xa5 flags 0x1
pnp 00:02:   add io  0xa8-0xa9 flags 0x1
pnp 00:02:   add io  0xac-0xad flags 0x1
pnp 00:02:   add io  0xb0-0xb5 flags 0x1
pnp 00:02:   add io  0xb8-0xb9 flags 0x1
pnp 00:02:   add io  0xbc-0xbd flags 0x1
pnp 00:02:   add io  0x50-0x53 flags 0x1
pnp 00:02:   add io  0x72-0x77 flags 0x1
pnp 00:02:   add io  0x164e-0x164f flags 0x1
pnp 00:02:   add io  0x2e-0x2f flags 0x1
pnp 00:02:   add io  0x1000-0x107f flags 0x1
pnp 00:02:   add io  0x1180-0x11bf flags 0x1
pnp 00:02:   add io  0x800-0x80f flags 0x1
pnp 00:02:   add io  0x15e0-0x15ef flags 0x1
pnp 00:02:   add io  0x1600-0x165f flags 0x1
pnp 00:02:   add mem 0xf0000000-0xf3ffffff flags 0x1
pnp 00:02:   add mem 0xfed1c000-0xfed1ffff flags 0x1
pnp 00:02:   add mem 0xfed14000-0xfed17fff flags 0x1
pnp 00:02:   add mem 0xfed18000-0xfed18fff flags 0x1
pnp 00:02:   add mem 0xfed19000-0xfed19fff flags 0x1
pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x188
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: parse allocated resources
pnp 00:03:   add mem 0xfed00000-0xfed003ff flags 0x0
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: parse allocated resources
pnp 00:04:   add io  0x0-0xf flags 0x1
pnp 00:04:   add io  0x80-0x8f flags 0x1
pnp 00:04:   add io  0xc0-0xdf flags 0x1
pnp 00:04:   add dma 4 flags 0x5
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: parse allocated resources
pnp 00:05:   add io  0x61-0x61 flags 0x1
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: parse allocated resources
pnp 00:06:   add io  0xf0-0xf0 flags 0x1
pnp 00:06:   add irq 13 flags 0x1
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: parse allocated resources
pnp 00:07:   add io  0x70-0x71 flags 0x1
pnp 00:07:   add irq 8 flags 0x1
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: parse allocated resources
pnp 00:08:   add io  0x60-0x60 flags 0x1
pnp 00:08:   add io  0x64-0x64 flags 0x1
pnp 00:08:   add irq 1 flags 0x1
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: parse allocated resources
pnp 00:09:   add irq 12 flags 0x1
pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
pnp 00:0a: parse allocated resources
pnp 00:0a:   add io  0x2f8-0x2ff flags 0x1
pnp 00:0a:   add irq 3 flags 0x1
pnp 00:0a:   add dma 3 flags 0x0
pnp 00:0a: parse resource options
pnp 00:0a:   dependent set 0 (preferred) io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
pnp 00:0a:   dependent set 0 (preferred) irq 3 flags 0x1
pnp 00:0a:   dependent set 0 (preferred) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a:   dependent set 1 (acceptable) io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
pnp 00:0a:   dependent set 1 (acceptable) irq 4 flags 0x1
pnp 00:0a:   dependent set 1 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a:   dependent set 2 (acceptable) io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
pnp 00:0a:   dependent set 2 (acceptable) irq 3 flags 0x1
pnp 00:0a:   dependent set 2 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a:   dependent set 3 (acceptable) io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
pnp 00:0a:   dependent set 3 (acceptable) irq 4 flags 0x1
pnp 00:0a:   dependent set 3 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a:   dependent set 4 (functional) io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
pnp 00:0a:   dependent set 4 (functional) irq 4 5 7 flags 0x1
pnp 00:0a:   dependent set 4 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a:   dependent set 5 (functional) io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
pnp 00:0a:   dependent set 5 (functional) irq 3 5 7 flags 0x1
pnp 00:0a:   dependent set 5 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a:   dependent set 6 (functional) io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
pnp 00:0a:   dependent set 6 (functional) irq 4 5 7 flags 0x1
pnp 00:0a:   dependent set 6 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a:   dependent set 7 (functional) io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
pnp 00:0a:   dependent set 7 (functional) irq 3 5 7 flags 0x1
pnp 00:0a:   dependent set 7 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x7b returned 0 after 26 msecs
calling  misc_init+0x0/0x7f
initcall misc_init+0x0/0x7f returned 0 after 0 msecs
calling  cn_init+0x0/0xcb
initcall cn_init+0x0/0xcb returned 0 after 0 msecs
calling  tifm_init+0x0/0x6d
initcall tifm_init+0x0/0x6d returned 0 after 0 msecs
calling  phy_init+0x0/0x29
initcall phy_init+0x0/0x29 returned 0 after 0 msecs
calling  init_scsi+0x0/0x79
SCSI subsystem initialized
initcall init_scsi+0x0/0x79 returned 0 after 0 msecs
calling  ata_init+0x0/0x2a4
libata version 3.00 loaded.
initcall ata_init+0x0/0x2a4 returned 0 after 0 msecs
calling  spi_init+0x0/0x68
initcall spi_init+0x0/0x68 returned 0 after 0 msecs
calling  usb_init+0x0/0xfd
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0xfd returned 0 after 1 msecs
calling  serio_init+0x0/0x82
initcall serio_init+0x0/0x82 returned 0 after 0 msecs
calling  gameport_init+0x0/0x82
initcall gameport_init+0x0/0x82 returned 0 after 0 msecs
calling  input_init+0x0/0xd7
initcall input_init+0x0/0xd7 returned 0 after 0 msecs
calling  i2c_init+0x0/0x4f
i2c-core: driver [dummy] registered
initcall i2c_init+0x0/0x4f returned 0 after 0 msecs
calling  power_supply_class_init+0x0/0x29
initcall power_supply_class_init+0x0/0x29 returned 0 after 0 msecs
calling  thermal_init+0x0/0x41
initcall thermal_init+0x0/0x41 returned 0 after 0 msecs
calling  mmc_init+0x0/0x6b
initcall mmc_init+0x0/0x6b returned 0 after 0 msecs
calling  leds_init+0x0/0x27
initcall leds_init+0x0/0x27 returned 0 after 0 msecs
calling  dma_bus_init+0x0/0x23
initcall dma_bus_init+0x0/0x23 returned 0 after 0 msecs
calling  pci_subsys_init+0x0/0xe6
PCI: Using ACPI for IRQ routing
number of MP IRQ sources: 15.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0020
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  1    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  1    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 003 03  0    0    0   0   0    1    1    51
 06 003 03  0    0    0   0   0    1    1    59
 07 003 03  0    0    0   0   0    1    1    61
 08 003 03  1    0    0   0   0    1    1    69
 09 003 03  0    1    0   0   0    1    1    71
 0a 003 03  0    0    0   0   0    1    1    79
 0b 003 03  0    0    0   0   0    1    1    81
 0c 003 03  1    0    0   0   0    1    1    89
 0d 003 03  1    0    0   0   0    1    1    91
 0e 003 03  0    0    0   0   0    1    1    99
 0f 003 03  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
initcall pci_subsys_init+0x0/0xe6 returned 0 after 6 msecs
calling  proto_init+0x0/0x27
initcall proto_init+0x0/0x27 returned 0 after 0 msecs
calling  net_dev_init+0x0/0x12f
initcall net_dev_init+0x0/0x12f returned 0 after 0 msecs
calling  neigh_init+0x0/0x66
initcall neigh_init+0x0/0x66 returned 0 after 0 msecs
calling  fib_rules_init+0x0/0x99
initcall fib_rules_init+0x0/0x99 returned 0 after 0 msecs
calling  genl_init+0x0/0xb0
initcall genl_init+0x0/0xb0 returned 0 after 0 msecs
calling  cipso_v4_init+0x0/0x6d
initcall cipso_v4_init+0x0/0x6d returned 0 after 0 msecs
calling  bt_init+0x0/0x50
Bluetooth: Core ver 2.12
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall bt_init+0x0/0x50 returned 0 after 0 msecs
calling  atm_init+0x0/0x9c
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall atm_init+0x0/0x9c returned 0 after 0 msecs
calling  wireless_nlevent_init+0x0/0x39
initcall wireless_nlevent_init+0x0/0x39 returned 0 after 0 msecs
calling  netlbl_init+0x0/0x6d
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x6d returned 0 after 0 msecs
calling  rfkill_init+0x0/0x5a
initcall rfkill_init+0x0/0x5a returned 0 after 0 msecs
calling  sysctl_init+0x0/0x2d
initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs
calling  pci_iommu_init+0x0/0xc
initcall pci_iommu_init+0x0/0xc returned 0 after 0 msecs
calling  hpet_late_init+0x0/0xfb
initcall hpet_late_init+0x0/0xfb returned -19 after 0 msecs
calling  clocksource_done_booting+0x0/0x11
initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 msecs
calling  init_pipe_fs+0x0/0x41
initcall init_pipe_fs+0x0/0x41 returned 0 after 0 msecs
calling  init_mnt_writers+0x0/0x61
initcall init_mnt_writers+0x0/0x61 returned 0 after 0 msecs
calling  eventpoll_init+0x0/0x7d
initcall eventpoll_init+0x0/0x7d returned 0 after 0 msecs
calling  anon_inode_init+0x0/0xdf
initcall anon_inode_init+0x0/0xdf returned 0 after 0 msecs
calling  acpi_rtc_init+0x0/0xd4
ACPI: RTC can wake from S4
initcall acpi_rtc_init+0x0/0xd4 returned 0 after 0 msecs
calling  acpi_event_init+0x0/0x46
initcall acpi_event_init+0x0/0x46 returned 0 after 0 msecs
calling  pnp_system_init+0x0/0xf
pnp: the driver 'system' has been registered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:00: driver attached
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:02: driver attached
initcall pnp_system_init+0x0/0xf returned 0 after 1 msecs
calling  chr_dev_init+0x0/0x86
initcall chr_dev_init+0x0/0x86 returned 0 after 1 msecs
calling  firmware_class_init+0x0/0x5c
initcall firmware_class_init+0x0/0x5c returned 0 after 0 msecs
calling  loopback_init+0x0/0xf
initcall loopback_init+0x0/0xf returned 0 after 0 msecs
calling  cpufreq_gov_performance_init+0x0/0xf
initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 msecs
calling  cpufreq_gov_dbs_init+0x0/0xf
initcall cpufreq_gov_dbs_init+0x0/0xf returned 0 after 0 msecs
calling  init_acpi_pm_clocksource+0x0/0x152
PM-Timer running at invalid rate: 87% of normal - aborting.
initcall init_acpi_pm_clocksource+0x0/0x152 returned -19 after 28 msecs
calling  ssb_modinit+0x0/0x41
initcall ssb_modinit+0x0/0x41 returned 0 after 0 msecs
calling  pcibios_assign_resources+0x0/0x91
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
pci 0000:00:1c.0:   MEM window: 0xee000000-0xee0fffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
pci 0000:00:1c.1:   MEM window: 0xec000000-0xedffffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000e4000000-0x000000e40fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0x5000-0x6fff
pci 0000:00:1c.2:   MEM window: 0xe8000000-0xe9ffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000e4100000-0x000000e41fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.3:   IO window: 0x7000-0x8fff
pci 0000:00:1c.3:   MEM window: 0xea000000-0xebffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000e4200000-0x000000e42fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0:   IO window: 0x009000-0x0090ff
pci 0000:15:00.0:   IO window: 0x009400-0x0094ff
pci 0000:15:00.0:   PREFETCH window: 0xe0000000-0xe3ffffff
pci 0000:15:00.0:   MEM window: 0x88000000-0x8bffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0:   IO window: 0x9000-0xcfff
pci 0000:00:1e.0:   MEM window: 0xe4300000-0xe7ffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000e0000000-0x000000e3ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1c.3 to 64
pci 0000:00:1e.0: enabling device (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
vendor=8086 device=2448
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 02 index 0 io port: [2000, 2fff]
bus: 02 index 1 mmio: [ee000000, ee0fffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [3000, 4fff]
bus: 03 index 1 mmio: [ec000000, edffffff]
bus: 03 index 2 mmio: [e4000000, e40fffff]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [5000, 6fff]
bus: 04 index 1 mmio: [e8000000, e9ffffff]
bus: 04 index 2 mmio: [e4100000, e41fffff]
bus: 04 index 3 mmio: [0, 0]
bus: 0c index 0 io port: [7000, 8fff]
bus: 0c index 1 mmio: [ea000000, ebffffff]
bus: 0c index 2 mmio: [e4200000, e42fffff]
bus: 0c index 3 mmio: [0, 0]
bus: 15 index 0 io port: [9000, cfff]
bus: 15 index 1 mmio: [e4300000, e7ffffff]
bus: 15 index 2 mmio: [e0000000, e3ffffff]
bus: 15 index 3 io port: [0, ffff]
bus: 15 index 4 mmio: [0, ffffffffffffffff]
bus: 16 index 0 io port: [9000, 90ff]
bus: 16 index 1 io port: [9400, 94ff]
bus: 16 index 2 mmio: [e0000000, e3ffffff]
bus: 16 index 3 mmio: [88000000, 8bffffff]
initcall pcibios_assign_resources+0x0/0x91 returned 0 after 4 msecs
calling  inet_init+0x0/0x1be
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x1be returned 0 after 11 msecs
calling  af_unix_init+0x0/0x47
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x47 returned 0 after 0 msecs
calling  populate_rootfs+0x0/0x102
initcall populate_rootfs+0x0/0x102 returned 0 after 1 msecs
calling  pci_init+0x0/0x2c
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.3: Performing full reset
initcall pci_init+0x0/0x2c returned 0 after 0 msecs
calling  ehci_hcd_init+0x0/0x70
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26-tip ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
initcall ehci_hcd_init+0x0/0x70 returned 0 after 116 msecs
calling  ohci_hcd_mod_init+0x0/0xb0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
initcall ohci_hcd_mod_init+0x0/0xb0 returned 0 after 0 msecs
calling  uhci_hcd_init+0x0/0xc7
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Pin 1-16 already programmed
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-tip uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 8 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26-tip uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26-tip uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
Pin 1-19 already programmed
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00
hub 5-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.26-tip uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
initcall uhci_hcd_init+0x0/0xc7 returned 0 after 402 msecs
calling  i8259A_init_sysfs+0x0/0x1d
initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 0 msecs
calling  sbf_init+0x0/0xbd
Simple Boot Flag at 0x35 set to 0x1
initcall sbf_init+0x0/0xbd returned 0 after 0 msecs
calling  i8237A_init_sysfs+0x0/0x1d
initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 0 msecs
calling  add_rtc_cmos+0x0/0x1a
initcall add_rtc_cmos+0x0/0x1a returned 0 after 0 msecs
calling  cache_sysfs_init+0x0/0x47
initcall cache_sysfs_init+0x0/0x47 returned 0 after 0 msecs
calling  eps_init+0x0/0x3e
initcall eps_init+0x0/0x3e returned -19 after 0 msecs
calling  nforce2_init+0x0/0x5e
cpufreq: No nForce2 chipset.
initcall nforce2_init+0x0/0x5e returned -19 after 0 msecs
calling  microcode_init+0x0/0xa2
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
initcall microcode_init+0x0/0xa2 returned 0 after 0 msecs
calling  init_lapic_sysfs+0x0/0x38
initcall init_lapic_sysfs+0x0/0x38 returned 0 after 0 msecs
calling  ioapic_init_sysfs+0x0/0x84
initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 0 msecs
calling  add_pcspkr+0x0/0x35
initcall add_pcspkr+0x0/0x35 returned 0 after 0 msecs
calling  start_pageattr_test+0x0/0x38
initcall start_pageattr_test+0x0/0x38 returned 0 after 0 msecs
calling  debug_pagealloc_proc_init+0x0/0x27
initcall debug_pagealloc_proc_init+0x0/0x27 returned 0 after 0 msecs
calling  aes_init+0x0/0xf
initcall aes_init+0x0/0xf returned 0 after 0 msecs
calling  init+0x0/0xf
initcall init+0x0/0xf returned 0 after 0 msecs
calling  init+0x0/0xf
initcall init+0x0/0xf returned 0 after 0 msecs
calling  create_proc_profile+0x0/0x19f
initcall create_proc_profile+0x0/0x19f returned 0 after 0 msecs
calling  ioresources_init+0x0/0x2d
initcall ioresources_init+0x0/0x2d returned 0 after 0 msecs
calling  uid_cache_init+0x0/0x5e
initcall uid_cache_init+0x0/0x5e returned 0 after 0 msecs
calling  init_posix_timers+0x0/0x7c
initcall init_posix_timers+0x0/0x7c returned 0 after 0 msecs
calling  init_posix_cpu_timers+0x0/0x90
initcall init_posix_cpu_timers+0x0/0x90 returned 0 after 0 msecs
calling  nsproxy_cache_init+0x0/0x27
initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 msecs
calling  timekeeping_init_device+0x0/0x1d
initcall timekeeping_init_device+0x0/0x1d returned 0 after 0 msecs
calling  init_clocksource_sysfs+0x0/0x43
initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 0 msecs
calling  init_timer_list_procfs+0x0/0x27
initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 msecs
calling  lockdep_proc_init+0x0/0x5f
initcall lockdep_proc_init+0x0/0x5f returned 0 after 0 msecs
calling  futex_init+0x0/0x6f
initcall futex_init+0x0/0x6f returned 0 after 0 msecs
calling  init_rttest+0x0/0x102
Initializing RT-Tester: OK
initcall init_rttest+0x0/0x102 returned 0 after 1 msecs
calling  proc_dma_init+0x0/0x1c
initcall proc_dma_init+0x0/0x1c returned 0 after 0 msecs
calling  percpu_modinit+0x0/0x64
initcall percpu_modinit+0x0/0x64 returned 0 after 0 msecs
calling  kallsyms_init+0x0/0x1f
initcall kallsyms_init+0x0/0x1f returned 0 after 0 msecs
calling  crash_save_vmcoreinfo_init+0x0/0x316
initcall crash_save_vmcoreinfo_init+0x0/0x316 returned 0 after 0 msecs
calling  crash_notes_memory_init+0x0/0x36
initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 msecs
calling  pid_namespaces_init+0x0/0x27
initcall pid_namespaces_init+0x0/0x27 returned 0 after 0 msecs
calling  audit_init+0x0/0xc4
audit: initializing netlink socket (disabled)
type=2000 audit(1216632057.064:1): initialized
initcall audit_init+0x0/0xc4 returned 0 after 0 msecs
calling  init_kprobes+0x0/0xfc
Kprobe smoke test started
Kprobe smoke test passed successfully
initcall init_kprobes+0x0/0xfc returned 0 after 14 msecs
calling  relay_init+0x0/0x11
initcall relay_init+0x0/0x11 returned 0 after 0 msecs
calling  utsname_sysctl_init+0x0/0x11
initcall utsname_sysctl_init+0x0/0x11 returned 0 after 0 msecs
calling  init_per_zone_pages_min+0x0/0x48
initcall init_per_zone_pages_min+0x0/0x48 returned 0 after 0 msecs
calling  pdflush_init+0x0/0x16
initcall pdflush_init+0x0/0x16 returned 0 after 0 msecs
calling  kswapd_init+0x0/0x1d
initcall kswapd_init+0x0/0x1d returned 0 after 0 msecs
calling  setup_vmstat+0x0/0x37
initcall setup_vmstat+0x0/0x37 returned 0 after 0 msecs
calling  init_tmpfs+0x0/0xb9
initcall init_tmpfs+0x0/0xb9 returned 0 after 0 msecs
calling  slab_sysfs_init+0x0/0xb7
initcall slab_sysfs_init+0x0/0xb7 returned 0 after 30 msecs
calling  fasync_init+0x0/0x24
initcall fasync_init+0x0/0x24 returned 0 after 0 msecs
calling  aio_setup+0x0/0x64
initcall aio_setup+0x0/0x64 returned 0 after 0 msecs
calling  init_mbcache+0x0/0x11
initcall init_mbcache+0x0/0x11 returned 0 after 0 msecs
calling  dquot_init+0x0/0xdd
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xdd returned 0 after 0 msecs
calling  init_v1_quota_format+0x0/0xf
initcall init_v1_quota_format+0x0/0xf returned 0 after 0 msecs
calling  dnotify_init+0x0/0x24
initcall dnotify_init+0x0/0x24 returned 0 after 0 msecs
calling  configfs_init+0x0/0xbb
initcall configfs_init+0x0/0xbb returned 0 after 0 msecs
calling  init_devpts_fs+0x0/0x33
initcall init_devpts_fs+0x0/0x33 returned 0 after 0 msecs
calling  init_reiserfs_fs+0x0/0x72
initcall init_reiserfs_fs+0x0/0x72 returned 0 after 0 msecs
calling  init_ext3_fs+0x0/0x5f
initcall init_ext3_fs+0x0/0x5f returned 0 after 0 msecs
calling  init_ext4_fs+0x0/0x5f
initcall init_ext4_fs+0x0/0x5f returned 0 after 0 msecs
calling  journal_init+0x0/0xb6
initcall journal_init+0x0/0xb6 returned 0 after 1 msecs
calling  journal_init+0x0/0xd3
initcall journal_init+0x0/0xd3 returned 0 after 1 msecs
calling  init_ramfs_fs+0x0/0xf
initcall init_ramfs_fs+0x0/0xf returned 0 after 0 msecs
calling  init_fat_fs+0x0/0x46
initcall init_fat_fs+0x0/0x46 returned 0 after 0 msecs
calling  init_msdos_fs+0x0/0xf
initcall init_msdos_fs+0x0/0xf returned 0 after 0 msecs
calling  init_bfs_fs+0x0/0x4f
initcall init_bfs_fs+0x0/0x4f returned 0 after 0 msecs
calling  init_hfsplus_fs+0x0/0x50
initcall init_hfsplus_fs+0x0/0x50 returned 0 after 0 msecs
calling  vxfs_init+0x0/0x4d
initcall vxfs_init+0x0/0x4d returned 0 after 0 msecs
calling  init_nfs_fs+0x0/0xfc
initcall init_nfs_fs+0x0/0xfc returned 0 after 1 msecs
calling  init_nlm+0x0/0x1c
initcall init_nlm+0x0/0x1c returned 0 after 0 msecs
calling  init_nls_cp437+0x0/0xf
initcall init_nls_cp437+0x0/0xf returned 0 after 0 msecs
calling  init_nls_cp865+0x0/0xf
initcall init_nls_cp865+0x0/0xf returned 0 after 0 msecs
calling  init_nls_cp932+0x0/0xf
initcall init_nls_cp932+0x0/0xf returned 0 after 0 msecs
calling  init_nls_euc_jp+0x0/0x39
initcall init_nls_euc_jp+0x0/0x39 returned 0 after 0 msecs
calling  init_nls_cp936+0x0/0xf
initcall init_nls_cp936+0x0/0xf returned 0 after 0 msecs
calling  init_nls_cp949+0x0/0xf
initcall init_nls_cp949+0x0/0xf returned 0 after 0 msecs
calling  init_nls_cp1251+0x0/0xf
initcall init_nls_cp1251+0x0/0xf returned 0 after 0 msecs
calling  init_nls_ascii+0x0/0xf
initcall init_nls_ascii+0x0/0xf returned 0 after 0 msecs
calling  init_nls_iso8859_1+0x0/0xf
initcall init_nls_iso8859_1+0x0/0xf returned 0 after 0 msecs
calling  init_nls_iso8859_13+0x0/0xf
initcall init_nls_iso8859_13+0x0/0xf returned 0 after 0 msecs
calling  init_nls_iso8859_14+0x0/0xf
initcall init_nls_iso8859_14+0x0/0xf returned 0 after 0 msecs
calling  init_nls_koi8_u+0x0/0xf
initcall init_nls_koi8_u+0x0/0xf returned 0 after 0 msecs
calling  init_nls_koi8_ru+0x0/0x39
initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 0 msecs
calling  init_nls_utf8+0x0/0x1f
initcall init_nls_utf8+0x0/0x1f returned 0 after 0 msecs
calling  init_sysv_fs+0x0/0x43
initcall init_sysv_fs+0x0/0x43 returned 0 after 0 msecs
calling  init_ncp_fs+0x0/0x4f
initcall init_ncp_fs+0x0/0x4f returned 0 after 0 msecs
calling  init_ntfs_fs+0x0/0x199
NTFS driver 2.1.29 [Flags: R/O].
initcall init_ntfs_fs+0x0/0x199 returned 0 after 0 msecs
calling  init_autofs4_fs+0x0/0xf
initcall init_autofs4_fs+0x0/0xf returned 0 after 0 msecs
calling  fuse_init+0x0/0xf8
fuse init (API version 7.9)
initcall fuse_init+0x0/0xf8 returned 0 after 0 msecs
calling  ipc_init+0x0/0x20
msgmni has been set to 1703
initcall ipc_init+0x0/0x20 returned 0 after 0 msecs
calling  ipc_sysctl_init+0x0/0x11
initcall ipc_sysctl_init+0x0/0x11 returned 0 after 0 msecs
calling  key_proc_init+0x0/0x2c
initcall key_proc_init+0x0/0x2c returned 0 after 0 msecs
calling  selinux_nf_ip_init+0x0/0x68
SELinux:  Registering netfilter hooks
initcall selinux_nf_ip_init+0x0/0x68 returned 0 after 0 msecs
calling  init_sel_fs+0x0/0x5a
initcall init_sel_fs+0x0/0x5a returned 0 after 0 msecs
calling  selnl_init+0x0/0x46
initcall selnl_init+0x0/0x46 returned 0 after 0 msecs
calling  sel_netif_init+0x0/0x57
initcall sel_netif_init+0x0/0x57 returned 0 after 0 msecs
calling  sel_netnode_init+0x0/0x68
initcall sel_netnode_init+0x0/0x68 returned 0 after 0 msecs
calling  sel_netport_init+0x0/0x68
initcall sel_netport_init+0x0/0x68 returned 0 after 0 msecs
calling  aurule_init+0x0/0x30
initcall aurule_init+0x0/0x30 returned 0 after 0 msecs
calling  crypto_algapi_init+0x0/0xc
initcall crypto_algapi_init+0x0/0xc returned 0 after 0 msecs
calling  blkcipher_module_init+0x0/0x24
initcall blkcipher_module_init+0x0/0x24 returned 0 after 0 msecs
calling  seqiv_module_init+0x0/0xf
initcall seqiv_module_init+0x0/0xf returned 0 after 0 msecs
calling  cryptomgr_init+0x0/0xf
initcall cryptomgr_init+0x0/0xf returned 0 after 0 msecs
calling  hmac_module_init+0x0/0xf
initcall hmac_module_init+0x0/0xf returned 0 after 0 msecs
calling  crypto_xcbc_module_init+0x0/0xf
initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 msecs
calling  crypto_null_mod_init+0x0/0x67
initcall crypto_null_mod_init+0x0/0x67 returned 0 after 0 msecs
calling  md5_mod_init+0x0/0xf
initcall md5_mod_init+0x0/0xf returned 0 after 0 msecs
calling  rmd128_mod_init+0x0/0xf
initcall rmd128_mod_init+0x0/0xf returned 0 after 0 msecs
calling  sha1_generic_mod_init+0x0/0xf
initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 msecs
calling  tgr192_mod_init+0x0/0x52
initcall tgr192_mod_init+0x0/0x52 returned 0 after 0 msecs
calling  crypto_cbc_module_init+0x0/0xf
initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 msecs
calling  crypto_pcbc_module_init+0x0/0xf
initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 msecs
calling  crypto_module_init+0x0/0xf
initcall crypto_module_init+0x0/0xf returned 0 after 0 msecs
calling  crypto_ctr_module_init+0x0/0x33
initcall crypto_ctr_module_init+0x0/0x33 returned 0 after 0 msecs
calling  des_generic_mod_init+0x0/0x33
initcall des_generic_mod_init+0x0/0x33 returned 0 a