> I have changed NICs, I have changed between squid versions from 2.x to
> 3.x. Nothing has helped.
>
> Following are some settings to mention;
>
> ulimit -n is set to 8000
> net.core.somaxconn = 1024
> net.core.netdev_max_backlog = 3000
> net.ipv4.tcp_max_syn_backlog = 3000
>
> squid is built with 8000 file descriptors.
>
> This is a 60 client LAN behind this box, using it as an internet
> gateway/firewall for the following traffic;
>
> 1) vpn
> 2) email
> 3) cvs
> 4) browsing (http/https)
> 5) some ftp
>
> /////////////////////////////////////////////////////////////////////////////////////////
>
> This is a PIII (Coppermine)
> cpu MHz : 864.499
> RAM : 1 GB
> Hard disk : 2x 36 GB SCSI hard drives
> RAID : raid1
> Non Raid part : 3 non raid partitions
>
> /////////////////////////////////////////////////////////////////////////////////////////
>
> # cat /proc/mst
> cat: /proc/mst: No such file or directory
> sglhrcvs:~/work/traffic-shaping# cat /proc/mdstat
> Personalities : [raid1]
> md0 : active raid1 sda1[0] sdb1[1]
> 32226240 blocks [2/2] [UU]
>
>
> unused devices: <none>
>
> /////////////////////////////////////////////////////////////////////////////////////////
>
> This box worked fine when it had RHEL WS3 on it.
>
>
> -- Package-specific info:
> ** Version:
> Linux version 2.6.24-1-686 (Debian 2.6.24-6) (
waldi@debian.org) (gcc
> version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr
> 19 00:37:55 UTC 2008
>
> ** Command line:
> root=/dev/md0 ro
>
> process `sysctl' is using deprecated sysctl (syscall)
> net.ipv6.neigh.default.retrans_time; Use
> net.ipv6.neigh.default.retrans_time_ms instead.
>
> ** Loaded modules:
> Module Size Used by
> cls_u32 8100 1
> sch_cbq 16352 1
> tcp_diag 1792 0
> inet_diag 12136 1 tcp_diag
> xt_limit 2656 1
> xt_state 2464 1
> ipt_REDIRECT 2080 3
> ipt_MASQUERADE 3776 3
> xt_MARK 2272 11
> iptable_nat 6916 1
> nf_nat 18316 3 ipt_REDIRECT,ipt_MASQUERADE,iptable_nat
> nf_conntrack_ipv4 17352 3 iptable_nat
> nf_conntrack 62272 5
> xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
> iptable_filter 2976 1
> ppdev 8804 0
> lp 11076 0
> ac 6116 0
> battery 13572 0
> xt_TCPMSS 4384 1
> xt_tcpmss 2240 1
> xt_tcpudp 3136 29
> iptable_mangle 2784 1
> ip_tables 13188 3 iptable_nat,iptable_filter,iptable_mangle
> x_tables 14244 10
> xt_limit,xt_state,ipt_REDIRECT,ipt_MASQUERADE,xt_MARK,iptable_nat,xt_TCPMSS,xt_tcpmss,xt_tcpudp,ip_tables
> pppoe 12864 0
> pppox 3980 1 pppoe
> ppp_generic 26196 2 pppoe,pppox
> slhc 5920 1 ppp_generic
> ipv6 240836 35
> dm_snapshot 16964 0
> dm_mirror 21600 0
> dm_mod 55812 2 dm_snapshot,dm_mirror
> loop 16804 0
> parport_pc 33668 1
> parport 34280 3 ppdev,lp,parport_pc
> floppy 54628 0
> rtc 13052 0
> psmouse 36464 0
> pcspkr 3200 0
> i2c_i801 9232 0
> i2c_core 22432 1 i2c_i801
> button 8432 0
> serio_raw 6660 0
> shpchp 31028 0
> intel_agp 23412 1
> agpgart 31688 1 intel_agp
> pci_hotplug 27712 1 shpchp
> intel_rng 5632 0
> iTCO_wdt 11268 0
> evdev 11104 1
> sg 33264 0
> sr_mod 16708 0
> cdrom 32512 1 sr_mod
> ext3 122888 3
> jbd 43732 1 ext3
> mbcache 8288 1 ext3
> raid1 22240 1
> md_mod 73716 2 raid1
> ide_generic 1280 0 [permanent]
> sd_mod 27200 7
> aic7xxx 157560 5
> scsi_transport_spi 22816 1 aic7xxx
> ata_generic 7428 0
> libata 144464 1 ata_generic
> scsi_mod 141164 6
> sg,sr_mod,sd_mod,aic7xxx,scsi_transport_spi,libata
> generic 4388 0 [permanent]
> 3c59x 41064 0
> e100 33836 0
> mii 5312 2 3c59x,e100
> piix 7492 0 [permanent]
> uhci_hcd 23376 0
> ide_core 108292 3 ide_generic,generic,piix
> usbcore 132940 2 uhci_hcd
> thermal 16028 0
> processor 36520 1 thermal
> fan 4772 0
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation 82840 840 (Carmel)
> Chipset Host Bridge (Hub A) [8086:1a21] (rev 01)
> Subsystem: Dell Unknown device [1028:0096]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR+
> Latency: 0
> Region 0: Memory at ec000000 (32-bit, prefetchable) [size=32M]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
> FW- Rate=<none>
>
> 00:01.0 PCI bridge [0604]: Intel Corporation 82840 840 (Carmel)
> Chipset AGP Bridge [8086:1a23] (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> Memory behind bridge: f4000000-fbffffff
> Prefetchable memory behind bridge: 50000000-500fffff
> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge
> [8086:2418] (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=02, subordinate=03, sec-latency=64
> I/O behind bridge: 0000e000-0000ffff
> Memory behind bridge: f0000000-f3ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC)
> [8086:2410] (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE
> [8086:2411] (rev 02) (prog-if 80 [Master])
> Subsystem: Intel Corporation 82801AA IDE [8086:2411]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Region 0: [virtual] Memory at 000001f0 (32-bit,
> non-prefetchable) [disabled] [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3,
> non-prefetchable) [disabled] [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit,
> non-prefetchable) [disabled] [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3,
> non-prefetchable) [disabled] [size=1]
> Region 4: I/O ports at 1020 [size=16]
>
> 00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB
> [8086:2412] (rev 02) (prog-if 00 [UHCI])
> Subsystem: Intel Corporation 82801AA USB [8086:2412]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin D routed to IRQ 16
> Region 4: I/O ports at 1000 [size=32]
>
> 00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus [8086:2413] (rev 02)
> Subsystem: Intel Corporation 82801AA SMBus [8086:2413]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin B routed to IRQ 18
> Region 4: I/O ports at dcd0 [size=16]
>
> 01:00.0 VGA compatible controller [0300]: S3 Inc. 86c368 [Trio 3D/2X]
> [5333:8a13] (rev 02) (prog-if 00 [VGA])
> Subsystem: S3 Inc. Trio3D/2X [5333:8a13]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
> Expansion ROM at 50000000 [disabled] [size=64K]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [80] AGP version 1.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
> HTrans- 64bit- FW- AGP3- Rate=x1,x2
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x2
>
> 02:04.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M
> [Tornado] [10b7:9200] (rev 78)
> Subsystem: Dell Unknown device [1028:0096]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at ec80 [size=128]
> Region 1: Memory at f0fffc00 (32-bit, non-prefetchable) [size=128]
> Expansion ROM at f0200000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 02:06.0 Multimedia audio controller [0401]: Cirrus Logic CS 4614/22/24
> [CrystalClear SoundFusion Audio Accelerator] [1013:6003] (rev 01)
> Subsystem: Dell Unknown device [1028:0096]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (1000ns min, 6000ns max)
> Interrupt: pin A routed to IRQ 9
> Region 0: Memory at f0ffe000 (32-bit, non-prefetchable) [size=4K]
> Region 1: Memory at f0e00000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk+ DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:08.0 Ethernet controller [0200]: Intel Corporation 82557/8/9
> [Ethernet Pro 100] [8086:1229] (rev 05)
> Subsystem: IBM 82558B Ethernet Pro 10/100 [1014:005c]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at ee000000 (32-bit, prefetchable) [size=4K]
> Region 1: I/O ports at ec60 [size=32]
> Region 2: Memory at f0d00000 (32-bit, non-prefetchable) [size=1M]
> Expansion ROM at f0000000 [disabled] [size=1M]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:09.0 Ethernet controller [0200]: Intel Corporation 82557/8/9
> [Ethernet Pro 100] [8086:1229] (rev 0c)
> Subsystem: Intel Corporation EtherExpress PRO/100 S Desktop
> Adapter [8086:0040]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at f0ffd000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at ec00 [size=64]
> Region 2: Memory at f0fc0000 (32-bit, non-prefetchable) [size=128K]
> Expansion ROM at f0240000 [disabled] [size=64K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 02:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX
> [Cyclone] [10b7:9055] (rev 24)
> Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at e880 [size=128]
> Region 1: Memory at f0fff800 (32-bit, non-prefetchable) [size=128]
> Expansion ROM at f0220000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:0e.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152
> [1011:0024] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
> I/O behind bridge: 0000f000-0000ffff
> Memory behind bridge: f2000000-f3ffffff
> Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
>
> 03:0a.0 SCSI storage controller [0100]: Adaptec AIC-7899P U160/m
> [9005:00cf] (rev 01)
> Subsystem: Dell Unknown device [1028:0096]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 19
> BIST result: 00
> Region 0: I/O ports at fc00 [disabled] [size=256]
> Region 1: Memory at f2fff000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at f3000000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 03:0a.1 SCSI storage controller [0100]: Adaptec AIC-7899P U160/m
> [9005:00cf] (rev 01)
> Subsystem: Dell Unknown device [1028:0096]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 16
> BIST result: 00
> Region 0: I/O ports at f800 [disabled] [size=256]
> Region 1: Memory at f2ffe000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at f0100000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>
>
> -- System Information:
> Debian Release: 4.0
> APT prefers stable
> APT policy: (500, 'stable')
> Architecture: i386 (i686)
> Shell: /bin/sh linked to /bin/bash
> Kernel: Linux 2.6.24-1-686
> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
>
> Versions of packages linux-image-2.6.24-1-686 depends on:
> ii debconf [debconf-2.0] 1.5.11etch1 Debian configuration management sy
> ii initramfs-tools [linux-initr 0.85h tools for generating an initramfs
> ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.24-1-686 recommends:
> ii libc6-i686 2.3.6.ds1-13etch4 GNU C Library: Shared libraries [i
>
> -- debconf information:
> shared/kernel-image/really-run-bootloader: true
> linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
> linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
> linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
> linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
> linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
> linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
> linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
> linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
> linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
> linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
> linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
> linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
> linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
> linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
> linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
> linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
> linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
> linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
> linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
> linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to
majordomo@vger.kernel.org
> More majordomo info at
http://vger.kernel.org/majordomo-info.html
