Hello Linux crew,

        I've just switched the

        Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 01)

        netword card to an NForce 2 based motherboard and after a day
        of work it got stuck with "detected tx unit hang" messages
        showing in the console.

        The card worked flawlessly under load in a different computer
        for two years now, under the same/similar Ubuntu operating system.

        Unfortunaltly, the EEPROM fix from

        http://e1000.sourceforge.net/doku.php?id=known_issues&DokuWiki=9502f399bc8cae1528c5e85...

        from is not working/applicable:

        root@backupserver:~# ./fixeep-82573-dspd.sh eth1
        No appropriate hardware found for this fixup
        root@backupserver:~#

        /var/log/messages:  http://87.230.23.147/messages.txt
        /proc/interrupts: http://87.230.23.147/proc_interrupts.txt
        lspci -vv: http://87.230.23.147/lspcivv.txt


        If more info is needed, let me know.

        Thanks!

        ps. I don't follow the lists so please keep me in CC:

-- 
Best regards,
 speedy                          mailto:speedy@3d-io.com

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html