> From:
linux-arch-owner@vger.kernel.org [mailto:linux-arch-owner@vger.kernel.org] On Behalf Of Guan Xuetao
> Sent: Sunday, January 02, 2011 5:48 PM
> To: 'john stultz'
> Cc: linux-arch@vger.kernel.org;
linux-kernel@vger.kernel.org
> Subject: RE: [PATCHv1 09/12] unicore32 core architecture: timer and time
>
>
>
> > -----Original Message-----
> > From:
johnstul.lkml@gmail.com [mailto:johnstul.lkml@gmail.com] On Behalf Of john stultz
> > Sent: Tuesday, December 28, 2010 5:27 AM
> > To: Guan Xuetao
> > Cc: linux-arch@vger.kernel.org;
linux-kernel@vger.kernel.org
> > Subject: Re: [PATCHv1 09/12] unicore32 core architecture: timer and time
> >
> > 2010/12/25 Guan Xuetao <guanxuetao@mprc.pku.edu.cn>:
> > > From: Guan Xuetao <guanxuetao@mprc.pku.edu.cn>
> > >
> > > Patch 9 implements timer and time. RTC and PWM device drivers are also here.
> > >
> > > Signed-off-by: Guan Xuetao <guanxuetao@mprc.pku.edu.cn>
> >
> > Just a small request:
> >
> > > +static struct clocksource cksrc_puv3_oscr = {
> > > + .name = "oscr",
> > > + .rating = 200,
> > > + .read = puv3_read_oscr,
> > > + .mask = CLOCKSOURCE_MASK(32),
> > > + .shift = 18,
> >
> > Drop the shift assignment here.
> >
> > > + cksrc_puv3_oscr.mult =
> > > + clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_puv3_oscr.shift);
> > > +
> > Drop the mult assignment here.
> >
> >
> > > + clocksource_register(&cksrc_puv3_oscr);
> >
> > Use "clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE );" and
> > the kernel will fill in mult/shift appropriately.
> >
> > If you have any troubles after doing so, let me know.
>
> When using clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE ),
> the shift value become 0, and mult value become 0x838a91a7, and the system will be broken
> after printing "Switching to clocksource oscr".
>
> When using clocksource_register_khz(&cksrc_puv3_oscr, CLOCK_TICK_RATE ),
> the shift value become 0, and mult value become 0x4359611, and the system will run smoothly,
> but timer interrupt seems too frequently. Perhaps it is 4 times faster.
>
> For comparison, originally, when shift value is set to 0x12, the mult value become 1175e5e.
>
