Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
tempX_emergency will be used by max6696. It can also be used for other chips
supporting three upper temperature limits.

 Documentation/hwmon/sysfs-interface |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index ff45d1f..1ceb2b9 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -310,6 +310,12 @@ temp[1-*]_crit_hyst
 		from the critical value.
 		RW
 
+temp[1-*]_emergency
+		Temperature emergency value, typically greater than
+		corresponding temp_crit values.
+		Unit: millidegree Celsius
+		RW
+
 temp[1-*]_lcrit	Temperature critical min value, typically lower than
 		corresponding temp_min values.
 		Unit: millidegree Celsius
-- 
1.7.0.87.g0901d

--

[ message continues ]

If we have two-level alarms: critical, then emergency, it is best to have
that written down than to imply it by "typically greater than corresponding
temp_crit"...

-- 
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh
--

[ message continues ]

Do you have a better wording in mind ?

Guenter
--

[ message continues ]

How about:
        Temperature emergency max value, for chips supporting more than
        two upper temperature limits. Must be equal or greater than
        corresponding temp_crit values.
        Unit: millidegree Celsius
        RW

Guenter
--

[ message continues ]

Much better, thank you.

-- 
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh
--

[ message continues ]