REGULATOR_ADP_SWITCH doesn't exist in Kconfig, therefore removing all
references for it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
---
arch/blackfin/mach-bf537/boards/stamp.c | 103 -------------------------------
1 files changed, 0 insertions(+), 103 deletions(-)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9eaf5b0..09c6b46 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -35,9 +35,6 @@
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <asm/dpmc.h>
-#ifdef CONFIG_REGULATOR_ADP_SWITCH
-#include <linux/regulator/adp_switch.h>
-#endif
#ifdef CONFIG_REGULATOR_AD5398
#include <linux/regulator/ad5398.h>
#endif
@@ -2146,97 +2143,6 @@ static struct platform_device bfin_ac97 = {
};
#endif
-#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
-#define REGULATOR_ADP122 "adp122"
-#define REGULATOR_ADP150 "adp150"
-
-static struct regulator_consumer_supply adp122_consumers = {
- .supply = REGULATOR_ADP122,
-};
-
-static struct regulator_consumer_supply adp150_consumers = {
- .supply = REGULATOR_ADP150,
-};
-
-static struct regulator_init_data adp_switch_regulator_data[] = {
- {
- .constraints = {
- .name = REGULATOR_ADP122,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .min_uA = 0,
- .max_uA = 300000,
- },
- .num_consumer_supplies = 1, /* only 1 */
- .consumer_supplies = &adp122_consumers,
- .driver_data = (void *)GPIO_PF2, /* gpio port only */
- },
- {
- .constraints = {
- .name = REGULATOR_ADP150,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .min_uA = 0,
- .max_uA = 150000,
- },
- .num_consumer_supplies = 1, /* only 1 */
- .consumer_supplies = &adp150_consumers,
- .driver_data = (void *)GPIO_PF3, /* gpio port only */
- },
-};
-
-static struct adp_switch_platform_data adp_switch_pdata = {
- .regulator_num = ARRAY_SIZE(adp_switch_regulator_data),
- .regulator_data = adp_switch_regulator_data,
-};
-
-static struct platform_device adp_switch_device = {
- .name = "adp_switch",
- .id = 0,
- .dev = {
- .platform_data = &adp_switch_pdata,
- },
-};
-
-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
- defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
-static struct regulator_bulk_data adp122_bulk_data = {
- .supply = REGULATOR_ADP122,
-};
-
-static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
- .name = REGULATOR_ADP122,
- .num_supplies = 1,
- .supplies = &adp122_bulk_data,
-};
-
-static struct platform_device adp122_userspace_consumer_device = {
- .name = "reg-userspace-consumer",
- .id = 0,
- .dev = {
- .platform_data = &adp122_userspace_comsumer_data,
- },
-};
-
-static struct regulator_bulk_data adp150_bulk_data = {
- .supply = REGULATOR_ADP150,
-};
-
-static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = {
- .name = REGULATOR_ADP150,
- .num_supplies = 1,
- .supplies = &adp150_bulk_data,
-};
-
-static struct platform_device adp150_userspace_consumer_device = {
- .name = "reg-userspace-consumer",
- .id = 1,
- .dev = {
- .platform_data = &adp150_userspace_comsumer_data,
- },
-};
-#endif
-#endif
-
-
static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
@@ -2367,15 +2273,6 @@ static struct platform_device *stamp_devices[] __initdata = {
&ad5398_userspace_consumer_device,
#endif
#endif
-
-#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
- &adp_switch_device,
-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
- defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
- &adp122_userspace_consumer_device,
- &adp150_userspace_consumer_device,
-#endif
-#endif
};
static int __init stamp_init(void)
--
1.7.0.4
--
