Hi,
On Wed, Aug 18, 2010 at 03:42:37PM +0200, ext Anton Vorontsov wrote:
quoted text >On Wed, Aug 18, 2010 at 04:01:05PM +0300, Krogerus Heikki (EXT-Teleca/Helsinki) wrote:
>> NXP ISP1704 is Battery Charging Specification 1.0 compliant USB
>> transceiver. This adds a power supply driver for ISP1704 and
>> ISP1707 USB transceivers.
>>
>> Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
>> ---
>
> I like this driver (very). A few, mostly cosmetic comments down
> below.
>
> [...]
>> +config CHARGER_ISP1704
>> + tristate "ISP1704 USB Charger Detection"
>> + select NOP_USB_XCEIV if ! MACH_NOKIA_RX51
>> + help
>
> "! MACH_NOKIA_RX51" looks wrong here. You probably don't actually
> need this if you fix platform device registration issue (see the
> very bottom of this email).
>
> [...]
>> +/*
>> + * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger
>> + * is actually a dedicated charger, the following steps need to be taken.
>> + */
>> +static inline int isp1704_charger_verify(struct isp1704_charger *isp)
>> +{
>> + u8 r, ret = 0;
>
> Please put variable declarations on separate lines, plus,
> 'ret' should probably be int, i.e.
>
> int ret;
> u8 r;
OK
quoted text >> +
>> + /* Reset the transceiver */
>> + r = otg_io_read(isp->otg, ULPI_FUNC_CTRL);
>> + r |= ULPI_FUNC_CTRL_RESET;
>> + otg_io_write(isp->otg, ULPI_FUNC_CTRL, r);
>> + usleep_range(1000, 2000);
>> +
>> + /* Set normal mode */
>> + r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK);
>> + otg_io_write(isp->otg, ULPI_FUNC_CTRL, r);
>> +
>> + /* Clear the DP and DM pull-down bits */
>> + r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN;
>> + otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), r);
>> +
>> + /* Enable strong pull-up on DP (1.5K) and reset */
>> + r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
>> + otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), r);
>> + usleep_range(1000, 2000);
>> +
>> + /* Read the line state */
>> + if (otg_io_read(isp->otg, ULPI_DEBUG)) {
>> + /* Is it a charger or PS/2 connection */
>> +
>> + /* Enable weak pull-up resistor on DP */
>> + otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL),
>> + ISP1704_PWR_CTRL_DP_WKPU_EN);
>> +
>> + /* Disable strong pull-up on DP (1.5K) */
>> + otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
>> + ULPI_FUNC_CTRL_TERMSELECT);
>> +
>> + /* Enable weak pull-down resistor on DM */
>> + otg_io_write(isp->otg, ULPI_SET(ULPI_OTG_CTRL),
>> + ULPI_OTG_CTRL_DM_PULLDOWN);
>> +
>> + /* It's a charger if the line states are clear */
>> + if (!(otg_io_read(isp->otg, ULPI_DEBUG)))
>> + ret = 1;
>> +
>> + /* Disable weak pull-up resistor on DP */
>> + otg_io_write(isp->otg, ULPI_CLR(ISP1704_PWR_CTRL),
>> + ISP1704_PWR_CTRL_DP_WKPU_EN);
>> + } else {
>> + ret = 1;
>> +
>> + /* Disable strong pull-up on DP (1.5K) */
>> + otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
>> + ULPI_FUNC_CTRL_TERMSELECT);
>> + }
>
> How about
>
> if (!otg_io_read(isp->otg, ULPI_DEBUG)) {
> /* Disable strong pull-up on DP (1.5K) */
> otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
> ULPI_FUNC_CTRL_TERMSELECT);
> return 1;
> }
>
> <the rest>
>
> Saves indentation level.
Yes, makes sense.
quoted text >> + return ret;
>> +}
>> +
>> +static inline int isp1704_charger_detect(struct isp1704_charger *isp)
>> +{
>> + unsigned long timeout;
>> + u8 r;
>> + int vdat;
>> +
>> + /* set SW control bit in PWR_CTRL register */
>> + otg_io_write(isp->otg, ISP1704_PWR_CTRL,
>> + ISP1704_PWR_CTRL_SWCTRL);
>> +
>> + /* enable manual charger detection */
>> + r = (ISP1704_PWR_CTRL_SWCTRL | ISP1704_PWR_CTRL_DPVSRC_EN);
>> + otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL), r);
>> + usleep_range(1000, 2000);
>> +
>> + timeout = jiffies + msecs_to_jiffies(300);
>> + while (!time_after(jiffies, timeout)) {
>
> I guess it is possible that vdat might become uninitialized
> if the code never hits the loop. The time between
> timeout = jiffies + msecs_to_jiffies(300);
> and
> while (!time_after(jiffies, timeout)) {
> is undefined.
So do while loop it is.
quoted text >> + /* Check if there is a charger */
>> + vdat = !!(otg_io_read(isp->otg, ISP1704_PWR_CTRL)
>> + & ISP1704_PWR_CTRL_VDAT_DET);
>
> Technically, there is no need for "!!".
VDAT_DET is the fifth bit, and since vdat is returned, it would end up
being the value for isp->present. However..
quoted text >> + if (vdat)
>> + break;
>> + }
>> + return vdat;
>> +}
>> +
>> +static void isp1704_charger_work(struct work_struct *data)
>> +{
>> + struct isp1704_charger *isp =
>> + container_of(data, struct isp1704_charger, work);
>> +
>> + /* FIXME Only supporting dedicated chargers even though isp1704 can
>> + * detect HUB and HOST chargers. If the device has already been
>> + * enumerated, the detection will break the connection.
>> + */
>> + if (isp->otg->state != OTG_STATE_B_IDLE)
>> + return;
>> +
>> + /* disable data pullups */
>> + if (isp->otg->gadget)
>> + usb_gadget_disconnect(isp->otg->gadget);
>> +
>> + /* detect charger */
>
> shouldn't be there 'isp->present = 0;'?..
>
>> + if (isp1704_charger_detect(isp))
>> + isp->present = isp1704_charger_verify(isp);
>
> i.e. it's kinda weird to see conditional isp->present update...
>
>> +
>> + /* enable data pullups */
>> + if (isp->otg->gadget)
>> + usb_gadget_connect(isp->otg->gadget);
>> +
>> + if (isp->present)
>
> ...and then unconditional checking of isp->present.
>
> I guess the code is OK, and somewhere else the logic handles
> this... but still an odd-looking function.
..I'll call isp1704_charger_verify() from inside
isp1704_charger_detect(), based on the vdat.
quoted text >> + power_supply_changed(&isp->psy);
>> +}
>> +
>> +static int isp1707_notifier_call(struct notifier_block *nb,
>> + unsigned long event, void *unused)
>> +{
>> + struct isp1704_charger *isp =
>> + container_of(nb, struct isp1704_charger, nb);
>> +
>> + switch (event) {
>> + case USB_EVENT_VBUS:
>> + schedule_work(&isp->work);
>> + break;
>> + case USB_EVENT_NONE:
>> + isp->present = 0;
>
> Probably this makes the code above work. But why don't we
> call schedule_work(&isp->work)?
USB_EVENT_NONE comes when we loose VBUS (the cable is unplugged). No
need to detect charger in this case.
quoted text > [...]
>> +static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
>> +{
>> + int vendor, product, i;
>
> int vendor;
> int product;
> int i;
OK
quoted text >> + int ret = -ENODEV;
>> +
>> + /* Test ULPI interface */
>> + ret = otg_io_write(isp->otg, ULPI_SCRATCH, 0xaa);
>> + if (ret < 0)
>> + return ret;
>
> By adding empty line here you'll make the code prettier.
>
>> + ret = otg_io_read(isp->otg, ULPI_SCRATCH);
>> + if (ret < 0)
>> + return ret;
>
> Ditto.
>
>> + if (ret != 0xaa)
>> + return -ENODEV;
>
> Ditto.
>
>> + /* Verify the product and vendor id matches */
>> + vendor = otg_io_read(isp->otg, ULPI_VENDOR_ID_LOW);
>> + vendor |= otg_io_read(isp->otg, ULPI_VENDOR_ID_HIGH) << 8;
>> + if (vendor != NXP_VENDOR_ID)
>> + return -ENODEV;
>
> Ditto.
>
>> + for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) {
>> + product = otg_io_read(isp->otg, ULPI_PRODUCT_ID_LOW);
>> + product |= otg_io_read(isp->otg, ULPI_PRODUCT_ID_HIGH) << 8;
>> + if (product == isp170x_id[i]) {
>> + sprintf(isp->model, "isp%x", product);
>> + return product;
>> + }
>> + }
>> +
>> + dev_err(isp->dev, "product id %x not matching known ids", product);
>> +
>> + return -ENODEV;
>> +}
>> +
>> +static int __devinit isp1704_charger_probe(struct platform_device *pdev)
>> +{
>> + struct isp1704_charger *isp;
>> + int ret = -ENODEV;
>> +
>> + isp = kzalloc(sizeof *isp, GFP_KERNEL);
>> + if (!isp)
>> + return -ENOMEM;
>> +
>> + isp->otg = otg_get_transceiver();
>> + if (!isp->otg) {
>> + kfree(isp);
>> + return ret;
>
> goto failX instead?
OK for this, and the above empty lines.
quoted text >> + }
>> +
>> + ret = isp1704_test_ulpi(isp);
>> + if (ret < 0)
>> + goto fail;
>> +
>> + isp->dev = &pdev->dev;
>> + platform_set_drvdata(pdev, isp);
>> +
>> + isp->psy.name = "isp1704";
>> + isp->psy.type = POWER_SUPPLY_TYPE_USB;
>> + isp->psy.properties = power_props;
>> + isp->psy.num_properties = ARRAY_SIZE(power_props);
>> + isp->psy.get_property = isp1704_charger_get_property;
>> +
>> + ret = power_supply_register(isp->dev, &isp->psy);
>> + if (ret)
>> + goto fail;
>> +
>> + /* REVISIT: using work in order to allow the otg notifications to be
>> + * made atomically in the future.
>> + */
>> + INIT_WORK(&isp->work, isp1704_charger_work);
>> +
>> + isp->nb.notifier_call = isp1707_notifier_call;
>
> Add an empty line here?
OK
quoted text >> + ret = otg_register_notifier(isp->otg, &isp->nb);
>> + if (ret)
>> + goto fail2;
>> +
>> + dev_info(isp->dev, "registered with product id %s\n", isp->model);
>> +
>> + return 0;
>> +fail2:
>> + power_supply_unregister(&isp->psy);
>> +fail:
>> + otg_put_transceiver(isp->otg);
>> + kfree(isp);
>> +
>> + dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret);
>> +
>> + return ret;
>> +}
>[...]
>> +static int __init isp1704_charger_init(void)
>> +{
>> + int ret = 0;
>> +
>> + ret = platform_driver_register(&isp1704_charger_driver);
>> + if (ret)
>> + return ret;
>> +
>> + isp1704_device = platform_device_register_simple("isp1704_charger",
>> + 0, NULL, 0);
>
> This is wrong. Please move this into either isp1704 generic
> or usb driver (if any), or platform (board) code.
>
> That way you also won't need "! MACH_NOKIA_RX51" in the Kconfig.
I'll do this. Thanks for the review. v2 coming up.
--
heikki
--
unsubscribe notice To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
majordomo@vger.kernel.org
More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.tux.org/lkml/ Messages in current thread:
Re: [PATCH] power_supply: add isp1704 charger detection driver , Heikki Krogerus , (Thu Aug 19, 12:03 am)
