From: "Murphy, Dan" <dmurphy@ti.com>
quoted text
> Hemanth
> I have a few comments on this patch.
>
> +static ssize_t cma3000_store_attr_mdfftmr(struct device *dev,
> +					struct device_attribute *attr,
> +					const char *buf, size_t count)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct cma3000_accl_data *data = platform_get_drvdata(pdev);
> +	unsigned long val;
> +	int error;
> +
> +	error = strict_strtoul(buf, 0, &val);
> +	if (error)
> +		return error;
> +
> +	mutex_lock(&data->mutex);
> +	data->pdata.mdfftmr = val;
> +
> +	disable_irq(data->client->irq);
> You should use disable_irq_nosync here.  This may not work properly on SMP.

Can u explain why disable_irq will not work on SMP.

quoted text
>
>> +	if (val == CMARANGE_2G) {
>> +		ctrl |= CMA3000_RANGE2G;
>> +		data->pdata.g_range = CMARANGE_2G;
>> +	} else if (val == CMARANGE_8G) {
>> +		ctrl |= CMA3000_RANGE8G;
>> +		data->pdata.g_range = CMARANGE_8G;
>
> Why are you modifying the platform data?  Why not just keep it in a global or a glocal structure and modify it that way?

If you look carefully, the variable data is indeed a local structure.

quoted text
>> +	} else {
>> +		error = -EINVAL;
>> +		goto err_op_failed;
>> +	}
>> +
>> +	g_range = data->pdata.g_range;
>> +	fuzz_x = data->pdata.fuzz_x;
>> +	fuzz_y = data->pdata.fuzz_y;
>> +	fuzz_z = data->pdata.fuzz_z;
> Why are you storing these locally and then using them once can't we eliminate these completely and just pass the platform data values into the set
> params?

I belive this is already discussed and agreed upon in the previous thread of discussion.
Pl refer the same.

quoted text
>> +
>> +	disable_irq(data->client->irq);
> You should use disable_irq_nosync here.  This may not work properly on SMP.
>

Same comment as above

quoted text
>> +	cma3000_set(data, CMA3000_CTRL, ctrl, "ctrl");
>> +
>> +	input_set_abs_params(data->input_dev, ABS_X, -g_range,
>> +				g_range, fuzz_x, 0);
>> +	input_set_abs_params(data->input_dev, ABS_Y, -g_range,
>> +				g_range, fuzz_y, 0);
>> +	input_set_abs_params(data->input_dev, ABS_Z, -g_range,
>> +				g_range, fuzz_z, 0);
> Don't necessarily agree with modifying the parameters for the input device on the fly.  Some implementations may be a read once on init and do not
> go back and check this.

Its the user space code that can modify the grange if required, so I suppose it will need to check
these values after modifying the range.

quoted text
>
>
> +		ret = request_threaded_irq(data->client->irq, NULL,
> +					cma3000_thread_irq,
> +					irqflags | IRQF_ONESHOT,
> +					data->client->name, data);
>
> This is implemented wrong.  You are doing a lot of processing in the IRQ context here.  Especially calls out to a peripheral.  The NULL should be
> your handler thread where you do all the device processing.

Are u sure u are referring to threaded irq, all the processing is being done in thread
context. Pl refer documentation for more details on threaded irqs.

quoted text
>
> Also this implementation only suggests that the HW has the IRQ connected what about devices that the IRQ line was not connected?
>
This is currently not implemented, since I am not aware of any boards with this configuration. A polling method could be added
in future if the need arises.



--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/