On Sat, Jul 31, 2010 at 05:21:33PM -0400, Jeff Garzik wrote:
quoted text
> On 07/31/2010 04:55 PM, Ondrej Zary wrote:
>> I was testing two CyberPro 2000 based PCI cards on x86 and the machine always
>> hanged completely when the cyber2000fb module was loaded. It seems that the
>> card hangs when some registers are accessed too quickly after writing RAMDAC
>> control register. With this patch, both card work.
>>
>> Add delay after RAMDAC control register write to prevent hangs on module load.
>>
>> Signed-off-by: Ondrej Zary<linux@rainbow-software.org>
>>
>> --- linux-2.6.35-rc2-orig/drivers/video/cyber2000fb.c	2010-06-06 05:43:24.000000000 +0200
>> +++ linux-2.6.35-rc3/drivers/video/cyber2000fb.c	2010-07-27 23:12:37.000000000 +0200
>> @@ -436,6 +436,8 @@ static void cyber2000fb_write_ramdac_ctr
>>   	cyber2000fb_writeb(i | 4, 0x3cf, cfb);
>>   	cyber2000fb_writeb(val, 0x3c6, cfb);
>>   	cyber2000fb_writeb(i, 0x3cf, cfb);
>> +	/* prevent card lock-up observed on x86 with CyberPro 2000 */
>> +	cyber2000fb_readb(0x3cf, cfb);
>>   }
>
> IIRC, cyber2000 is basically an S3 graphics chip.

No such luck.  It's a proprietary Integraphics chip, mainly used in
ARM Netwinders some 10 years ago.  It's completely different from the
S3 chips such as Trio64.
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/