>- In practice it works even without silk screen labels.
quoted text
>- The current EDAC code displays which DIMMS you have plugged
>  in so you can tell if you unplug one, if it was the DIMM
>  you were aiming at.

Potentially some unnecessary reboot cycles needed:
 - power off, pull a DIMM, power on, check with EDAC
 - repeat until you get the right DIMM

This also assumes that you can unplug just one DIMM. Some
motherboards require pairs of DIMMs to be added/removed together.

-Tony
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/