On Fri, Jun 11, 2010 at 12:08:01PM +0200, Lothar Wa?mann wrote:
quoted text
> Hi,
> 
> > > > > Using a mutex in clk_enable()/clk_disable() is a bad idea, since that
> > > > > makes it impossible to call those functions in interrupt context.
> > IMHO if a device generates an irq its clock should already be on.  This
> > way you don't need to enable or disable a clock in irq context.
> >  
> You may want to disable a clock in the IRQ handler. The VPU driver in
> the Freescale BSP for i.MX51 does exactly this.
> Anyway I don't see any reason for using a mutex here instead of
> spin_lock_irq_save() as all other implementations do.

Hmm, then again the VPU driver may just be a bit wrong here.

We could protect each clock with a spinlock, but that would end up
with a problem of spinning where we have clocks that takes 100s of
usec or so to init. See all PLLs on S3C devices, where it can take
100-300uS to get a stable clock out of the device.

-- 
Ben (ben@fluff.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/