Hi Alan,

Alan Cox wrote:
quoted text
> On Fri, 7 May 2010 15:18:50 +0200
> Juergen Beisert <jbe@pengutronix.de> wrote:
> > most SmartCard readers are external devices, connected via USB or
> > serial lines. So, they do not need special in-kernel drivers.
> >
> > My SmartCard interface is part of a SoC (i.MX25 CPU). So, I need an
> > in-kernel driver. Where would be the best place in the kernel tree,
> > to add a driver for this kind of device? Maybe "drivers/char"?
> > To exchange data with the plugged in SmartCard, only a couple of
> > IOCTLs are required (detecting if a card is plugged in, socket power
> > on/off, send reset to the card, configuring the communication
> > parameters). Data exchange with the SmartCard can be done with simple
> > read/write.
>
> I'd say drivers/char if its a generic char device, but if its MX25
> specific code entirely then drivers/platform or arch/.../platform.

This driver covers a SmartCard core built into this kind of CPU. Its not like 
an interrupt controller which is specific to the CPU. Its a component like 
the USB and LCD controller, also built into this CPU. Maybe other CPUs will 
follow that are also using this SmartCard core (I don't know, only the 
manufacture knows). 

quoted text
> The other question is one of API - it's going to best if the API isn't
> MX25 specific but could reasonably be expected to work with other
> future devices. A fake tty interface is probably overkill for that but
> it would be good to get general review of any API.

"faky tty"?

Regards,
Juergen
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/