On Thu, 8 Apr 2010 10:32:09 -0700
Randy Dunlap <randy.dunlap@oracle.com> wrote:

quoted text
> On Thu, 8 Apr 2010 14:58:00 +0900 KAMEZAWA Hiroyuki wrote:
> 
> > 
> > ==
> > From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
> > Documentation update for memory cgroup
> > 
> > Some informations are old, and  I think current document doesn't work
> > as "a guide for users".
> > We need summary of all of our controls, at least.
> > 
> > This patch updates information for current implementations and add a
> > summary of interfaces. etc...
> 
> I found some more... (below)
> 

Thank you. 

quoted text
> 
> > Changelog:
> >  - fixed tons of typos.
> >  - replaced "memcg" with "memory cgroup" AMAP.
> >  - replaced "mem+swap" with "memory+swap"
> > 
> > Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
> > ---
> >  Documentation/cgroups/memory.txt |  210 ++++++++++++++++++++++++++++-----------
> >  1 file changed, 152 insertions(+), 58 deletions(-)
> > 
> > Index: mmotm-temp/Documentation/cgroups/memory.txt
> > ===================================================================
> > --- mmotm-temp.orig/Documentation/cgroups/memory.txt
> > +++ mmotm-temp/Documentation/cgroups/memory.txt
> 
> > @@ -121,12 +150,18 @@ inserted into inode (radix-tree). While 
> >  processes, duplicate accounting is carefully avoided.
> >  
> >  A RSS page is unaccounted when it's fully unmapped. A PageCache page is
> > -unaccounted when it's removed from radix-tree.
> > +unaccounted when it's removed from radix-tree. Even if RSS pages are fully
> > +unmapped (by kswapd), they may exist as SwapCache in the system until they
> > +are really freed. Such SwapCaches also also accounted.
> > +A swapped-in page is not accounted until it's mapped. It's bacause we can't
> 
>                                                          This is because
> 
ok.

quoted text
> > +know a page will be finaly mapped at swapin-readahead happens.
> 
>                        finally mapped until
> 
> > +
> > +A Cache pages is unaccounted when it's removed from inode (radix-tree).
> 
>            page
> 
Ouch, again..


quoted text
> >  
> >  At page migration, accounting information is kept.
> >  
> >  Note: we just account pages-on-lru because our purpose is to control amount
> > -of used pages. not-on-lru pages are tend to be out-of-control from vm view.
> > +of used pages. not-on-lru pages are tend to be out-of-control from VM view.
> 
> drop:                              are
> 
Sure.


quoted text
> >  
> >  2.3 Shared Page Accounting
> >  
> 
> > @@ -248,15 +296,24 @@ caches, RSS and Active pages/Inactive pa
> >  
> >  4. Testing
> >  
> > -Balbir posted lmbench, AIM9, LTP and vmmstress results [10] and [11].
> > -Apart from that v6 has been tested with several applications and regular
> > -daily use. The controller has also been tested on the PPC64, x86_64 and
> > -UML platforms.
> > +For testing features and implementation, see memcg_test.txt.
> > +
> > +Performance test is also important. To see pure memory cgroup's overhead,
> > +testing on tmpfs will give you good numbers of small overheads.
> > +Example) do kernel make on tmpfs.
> 
>    Example:
> 
ok.


quoted text
> > +
> > +Page-fault scalability is also important. At measuring parallel
> > +page fault test, multi-process test may be better than multi-thread
> > +test because it has noise of shared objects/status.
> > +
> > +But above 2 is testing extreme situation. Trying usual test under memory cgroup
> 
>                are testing extreme situations.
> 

I always do this kind of mistake, Hm...

quoted text
> > +is always helpful.
> > +
> >  
> >  4.1 Troubleshooting
> >  
> >  Sometimes a user might find that the application under a cgroup is
> > -terminated. There are several causes for this:
> > +terminated by OOM killer. There are several causes for this:
> >  
> >  1. The cgroup limit is too low (just too low to do anything useful)
> >  2. The user is using anonymous memory and swap is turned off or too low
> 
> > @@ -296,10 +359,10 @@ will be charged as a new owner of it.
> >  
> >    # echo 0 > memory.force_empty
> >  
> > -  Almost all pages tracked by this memcg will be unmapped and freed. Some of
> > -  pages cannot be freed because it's locked or in-use. Such pages are moved
> > -  to parent and this cgroup will be empty. But this may return -EBUSY in
> > -  some too busy case.
> > +  Almost all pages tracked by this memory cgroup will be unmapped and freed.
> > +  Some of pages cannot be freed because it's locked or in-use. Such pages are
> 
>      Some pages                            they are locked
> 
Sure.


quoted text
> > +  moved to parent and this cgroup will be empty. This may return -EBUSY if
> > +  VM is too busy to free/move all pages immediately.
> >  
> >    Typical use case of this interface is that calling this before rmdir().
> >    Because rmdir() moves all pages to parent, some out-of-use page caches can be
> > @@ -309,19 +372,41 @@ will be charged as a new owner of it.
> >  
> >  memory.stat file includes following statistics
> >  
> > +# per-memory cgroup local status
> >  cache		- # of bytes of page cache memory.
> >  rss		- # of bytes of anonymous and swap cache memory.
> > +mapped_file	- # of bytes of mapped file (includes tmpfs/shmem)
> >  pgpgin		- # of pages paged in (equivalent to # of charging events).
> >  pgpgout		- # of pages paged out (equivalent to # of uncharging events).
> > -active_anon	- # of bytes of anonymous and  swap cache memory on active
> > -		  lru list.
> > +swap		- # of bytes of swap usage
> >  inactive_anon	- # of bytes of anonymous memory and swap cache memory on
> > +		  lru list.
> > +active_anon	- # of bytes of anonymous and  swap cache memory on active
> 
> drop one space between:                   and  swap
> 
ok. 

quoted text
> >  		  inactive lru list.
> 
> It would be better to use LRU throughout the file instead of using LRU in some
> places and lru in others (except when referring to variable names, of course).
> 

Ah, I'll use LRU.


quoted text
> > -active_file	- # of bytes of file-backed memory on active lru list.
> >  inactive_file	- # of bytes of file-backed memory on inactive lru list.
> > +active_file	- # of bytes of file-backed memory on active lru list.
> >  unevictable	- # of bytes of memory that cannot be reclaimed (mlocked etc).
> >  
> > -The following additional stats are dependent on CONFIG_DEBUG_VM.
> > +# status considering hierarchy (see memory.use_hierarchy settings)
> > +
> > +hierarchical_memory_limit - # of bytes of memory limit with regard to hierarchy
> > +			under which the memory cgroup is
> > +hierarchical_memsw_limit - # of bytes of memory+swap limit with regard to
> > +			hierarchy under which memory cgroup is.
> > +
> > +total_cache		- sum of all children's "cache"
> > +total_rss		- sum of all children's "rss"
> > +total_mapped_file	- sum of all children's "cache"
> > +total_pgpgin		- sum of all children's "pgpgin"
> > +total_pgpgout		- sum of all children's "pgpgout"
> > +total_swap		- sum of all children's "swap"
> > +total_inactive_anon	- sum of all children's "inactive_anon"
> > +total_active_anon	- sum of all children's "active_anon"
> > +total_inactive_file	- sum of all children's "inactive_file"
> > +total_active_file	- sum of all children's "active_file"
> > +total_unevictable	- sum of all children's "unevictable"
> > +
> > +# The following additional stats are dependent on CONFIG_DEBUG_VM.
> >  
> >  inactive_ratio		- VM internal parameter. (see mm/page_alloc.c)
> >  recent_rotated_anon	- VM internal parameter. (see mm/vmscan.c)
> > @@ -337,17 +422,26 @@ Memo:
> >  Note:
> >  	Only anonymous and swap cache memory is listed as part of 'rss' stat.
> >  	This should not be confused with the true 'resident set size' or the
> > -	amount of physical memory used by the cgroup. Per-cgroup rss
> > -	accounting is not done yet.
> > +	amount of physical memory used by the cgroup.
> > +	'rss + file_mapped" will give you resident set size of cgroup.
> > +	(Note: file and shmem may be shared amoung other cgroups. In that case,
> > +	 file_mapped is accounted only when the memory cgroup is owner of page
> > +	 cache.)
> >  
> >  5.3 swappiness
> >    Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
> >  
> >    Following cgroups' swappiness can't be changed.
> >    - root cgroup (uses /proc/sys/vm/swappiness).
> > -  - a cgroup which uses hierarchy and it has child cgroup.
> > +  - a cgroup which uses hierarchy and it has other cgroup(s) below it.
> >    - a cgroup which uses hierarchy and not the root of hierarchy.
> >  
> > +5.4 failcnt
> > +
> > +The memory controller provides memory.failcnt and memory.memsw.failcnt files.
> > +This failcnt(== failure count) shows the number of times that a usage counter
> > +hit its limit. When a memory controller hit a limit, failcnt increases and
> 
>                                            hits
> 
ok.


quoted text
> > +memory under it will be reclaimed.
> >  
> >  6. Hierarchy support
> >  
> 
> > @@ -513,9 +607,9 @@ As.
> >  
> >  This operation is only allowed to the top cgroup of subhierarchy.
> >  If oom-killer is disabled, tasks under cgroup will hang/sleep
> > -in memcg's oom-waitq when they request accountable memory.
> > +in memory cgroup's oom-waitq when they request accountable memory.
> >  
> > -For running them, you have to relax the memcg's oom sitaution by
> > +For running them, you have to relax the memory cgroup's oom sitaution by
> 
> It would be better to use OOM instead of oom throughout the file...
> 
yes, I'll rewrite.



quoted text
> >  	* enlarge limit or reduce usage.
> >  To reduce usage,
> >  	* kill some tasks.
> > @@ -526,7 +620,7 @@ Then, stopped tasks will work again.
> >  
> >  At reading, current status of OOM is shown.
> >  	oom_kill_disable 0 or 1 (if 1, oom-killer is disabled)
> > -	under_oom	 0 or 1 (if 1, the memcg is under OOM,tasks may
> > +	under_oom	 0 or 1 (if 1, the memory cgroup is under OOM,tasks may
> 
> space after:                                                      OOM, tasks may
> 

Ragards.
-Kame

quoted text
> >  				 be stopped.)
> >  
> >  11. TODO
> > 
> > --
> 
> 
> ---
> ~Randy
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/