> I fixed the reported checkpatch.pl problems except for a bunch of
quoted text
> long lines and some printk:s.
> I also removed versioning comments.
> 
> Signed-off-by: Lars Lindley <lindley@coyote.org>

ACK.

quoted text
> ---
>  drivers/staging/winbond/wbusb.c |  187 +++++++++++++++++---------------------
>  1 files changed, 84 insertions(+), 103 deletions(-)
> 
> diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
> index 3482eec..d7694e6 100644
> --- a/drivers/staging/winbond/wbusb.c
> +++ b/drivers/staging/winbond/wbusb.c
> @@ -142,19 +142,17 @@ static void hal_set_radio_mode(struct hw_data *pHwData, unsigned char radio_off)
>  	if (pHwData->SurpriseRemove)
>  		return;
>  
> -	if (radio_off)		//disable Baseband receive off
> -	{
> -		pHwData->CurrentRadioSw = 1;	// off
> +	if (radio_off) {	/* disable Baseband receive off */
> +		pHwData->CurrentRadioSw = 1;	/* off */
>  		reg->M24_MacControl &= 0xffffffbf;
>  	} else {
> -		pHwData->CurrentRadioSw = 0;	// on
> +		pHwData->CurrentRadioSw = 0;	/* on */
>  		reg->M24_MacControl |= 0x00000040;
>  	}
>  	Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl);
>  }
>  
> -static void
> -hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
> +static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
>  {
>  	struct wb35_reg *reg = &pHwData->reg;
>  
> @@ -163,17 +161,18 @@ hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
>  
>  	printk("Going to channel: %d/%d\n", channel.band, channel.ChanNo);
>  
> -	RFSynthesizer_SwitchingChannel(pHwData, channel);	// Switch channel
> +	RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */
>  	pHwData->Channel = channel.ChanNo;
>  	pHwData->band = channel.band;
>  #ifdef _PE_STATE_DUMP_
>  	printk("Set channel is %d, band =%d\n", pHwData->Channel,
>  	       pHwData->band);
>  #endif
> -	reg->M28_MacControl &= ~0xff;	// Clean channel information field
> +	reg->M28_MacControl &= ~0xff;	/* Clean channel information field */
>  	reg->M28_MacControl |= channel.ChanNo;
>  	Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl,
> -				       (s8 *) & channel, sizeof(struct chan_info));
> +				       (s8 *) &channel,
> +				       sizeof(struct chan_info));
>  }
>  
>  static void hal_set_current_channel(struct hw_data *pHwData, struct chan_info channel)
> @@ -188,21 +187,22 @@ static void hal_set_accept_broadcast(struct hw_data *pHwData, u8 enable)
>  	if (pHwData->SurpriseRemove)
>  		return;
>  
> -	reg->M00_MacControl &= ~0x02000000;	//The HW value
> +	reg->M00_MacControl &= ~0x02000000;	/* The HW value */
>  
>  	if (enable)
> -		reg->M00_MacControl |= 0x02000000;	//The HW value
> +		reg->M00_MacControl |= 0x02000000;	/* The HW value */
>  
>  	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
>  }
>  
> -//for wep key error detection, we need to accept broadcast packets to be received temporary.
> +/* For wep key error detection, we need to accept broadcast packets to be received temporary. */
>  static void hal_set_accept_promiscuous(struct hw_data *pHwData, u8 enable)
>  {
>  	struct wb35_reg *reg = &pHwData->reg;
>  
>  	if (pHwData->SurpriseRemove)
>  		return;
> +
>  	if (enable) {
>  		reg->M00_MacControl |= 0x00400000;
>  		Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
> @@ -219,9 +219,9 @@ static void hal_set_accept_multicast(struct hw_data *pHwData, u8 enable)
>  	if (pHwData->SurpriseRemove)
>  		return;
>  
> -	reg->M00_MacControl &= ~0x01000000;	//The HW value
> +	reg->M00_MacControl &= ~0x01000000;	/* The HW value */
>  	if (enable)
> -		reg->M00_MacControl |= 0x01000000;	//The HW value
> +		reg->M00_MacControl |= 0x01000000;	/* The HW value */
>  	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
>  }
>  
> @@ -232,13 +232,12 @@ static void hal_set_accept_beacon(struct hw_data *pHwData, u8 enable)
>  	if (pHwData->SurpriseRemove)
>  		return;
>  
> -	// 20040108 debug
> -	if (!enable)		//Due to SME and MLME are not suitable for 35
> +	if (!enable)	/* Due to SME and MLME are not suitable for 35 */
>  		return;
>  
> -	reg->M00_MacControl &= ~0x04000000;	//The HW value
> +	reg->M00_MacControl &= ~0x04000000;	/* The HW value */
>  	if (enable)
> -		reg->M00_MacControl |= 0x04000000;	//The HW value
> +		reg->M00_MacControl |= 0x04000000;	/* The HW value */
>  
>  	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
>  }
> @@ -283,8 +282,7 @@ static const struct ieee80211_ops wbsoft_ops = {
>  	.get_tsf		= wbsoft_get_tsf,
>  };
>  
> -static void
> -hal_set_ethernet_address(struct hw_data *pHwData, u8 * current_address)
> +static void hal_set_ethernet_address(struct hw_data *pHwData, u8 *current_address)
>  {
>  	u32 ltmp[2];
>  
> @@ -294,14 +292,12 @@ hal_set_ethernet_address(struct hw_data *pHwData, u8 * current_address)
>  	memcpy(pHwData->CurrentMacAddress, current_address, ETH_ALEN);
>  
>  	ltmp[0] = cpu_to_le32(*(u32 *) pHwData->CurrentMacAddress);
> -	ltmp[1] =
> -	    cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff;
> +	ltmp[1] = cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff;
>  
>  	Wb35Reg_BurstWrite(pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT);
>  }
>  
> -static void
> -hal_get_permanent_address(struct hw_data *pHwData, u8 * pethernet_address)
> +static void hal_get_permanent_address(struct hw_data *pHwData, u8 *pethernet_address)
>  {
>  	if (pHwData->SurpriseRemove)
>  		return;
> @@ -319,7 +315,7 @@ static void hal_stop(struct hw_data *pHwData)
>  	pHwData->Wb35Tx.tx_halt = 1;
>  	Wb35Tx_stop(pHwData);
>  
> -	reg->D00_DmaControl &= ~0xc0000000;	//Tx Off, Rx Off
> +	reg->D00_DmaControl &= ~0xc0000000;	/* Tx Off, Rx Off */
>  	Wb35Reg_Write(pHwData, 0x0400, reg->D00_DmaControl);
>  }
>  
> @@ -346,14 +342,14 @@ u8 hal_get_antenna_number(struct hw_data *pHwData)
>  }
>  
>  /* 0 : radio on; 1: radio off */
> -static u8 hal_get_hw_radio_off(struct hw_data * pHwData)
> +static u8 hal_get_hw_radio_off(struct hw_data *pHwData)
>  {
>  	struct wb35_reg *reg = &pHwData->reg;
>  
>  	if (pHwData->SurpriseRemove)
>  		return 1;
>  
> -	//read the bit16 of register U1B0
> +	/* read the bit16 of register U1B0 */
>  	Wb35Reg_Read(pHwData, 0x3b0, &reg->U1B0);
>  	if ((reg->U1B0 & 0x00010000)) {
>  		pHwData->CurrentRadioHw = 1;
> @@ -387,104 +383,98 @@ static void hal_led_control(unsigned long data)
>  
>  	if (pHwData->LED_control) {
>  		ltmp2 = pHwData->LED_control & 0xff;
> -		if (ltmp2 == 5)	// 5 is WPS mode
> -		{
> +		if (ltmp2 == 5)	{ /* 5 is WPS mode */
>  			TimeInterval = 100;
>  			ltmp2 = (pHwData->LED_control >> 8) & 0xff;
>  			switch (ltmp2) {
> -			case 1:	// [0.2 On][0.1 Off]...
> +			case 1:	/* [0.2 On][0.1 Off]... */
>  				pHwData->LED_Blinking %= 3;
> -				ltmp = 0x1010;	// Led 1 & 0 Green and Red
> -				if (pHwData->LED_Blinking == 2)	// Turn off
> +				ltmp = 0x1010;	/* Led 1 & 0 Green and Red */
> +				if (pHwData->LED_Blinking == 2)	/* Turn off */
>  					ltmp = 0;
>  				break;
> -			case 2:	// [0.1 On][0.1 Off]...
> +			case 2:	/* [0.1 On][0.1 Off]... */
>  				pHwData->LED_Blinking %= 2;
> -				ltmp = 0x0010;	// Led 0 red color
> -				if (pHwData->LED_Blinking)	// Turn off
> +				ltmp = 0x0010;	/* Led 0 red color */
> +				if (pHwData->LED_Blinking) /* Turn off */
>  					ltmp = 0;
>  				break;
> -			case 3:	// [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
> +			case 3:	/* [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... */
>  				pHwData->LED_Blinking %= 15;
> -				ltmp = 0x0010;	// Led 0 red color
> -				if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2))	// Turn off 0.6 sec
> +				ltmp = 0x0010;	/* Led 0 red color */
> +				if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2)) /* Turn off 0.6 sec */
>  					ltmp = 0;
>  				break;
> -			case 4:	// [300 On][ off ]
> -				ltmp = 0x1000;	// Led 1 Green color
> +			case 4:	/* [300 On][ off ] */
> +				ltmp = 0x1000;	/* Led 1 Green color */
>  				if (pHwData->LED_Blinking >= 3000)
> -					ltmp = 0;	// led maybe on after 300sec * 32bit counter overlap.
> +					ltmp = 0; /* led maybe on after 300sec * 32bit counter overlap. */
>  				break;
>  			}
>  			pHwData->LED_Blinking++;
>  
>  			reg->U1BC_LEDConfigure = ltmp;
> -			if (LEDSet != 7)	// Only 111 mode has 2 LEDs on PCB.
> -			{
> -				reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8;	// Copy LED result to each LED control register
> +			if (LEDSet != 7) { /* Only 111 mode has 2 LEDs on PCB. */
> +				reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8; /* Copy LED result to each LED control register */
>  				reg->U1BC_LEDConfigure |= (ltmp & 0xff00) >> 8;
>  			}
>  			Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
>  		}
> -	} else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw)	// If radio off
> -	{
> +	} else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw) { /* If radio off */
>  		if (reg->U1BC_LEDConfigure & 0x1010) {
>  			reg->U1BC_LEDConfigure &= ~0x1010;
>  			Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
>  		}
>  	} else {
>  		switch (LEDSet) {
> -		case 4:	// [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
> -			if (!pHwData->LED_LinkOn)	// Blink only if not Link On
> -			{
> -				// Blinking if scanning is on progress
> +		case 4:	/* [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */
> +			if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
> +				/* Blinking if scanning is on progress */
>  				if (pHwData->LED_Scanning) {
>  					if (pHwData->LED_Blinking == 0) {
>  						reg->U1BC_LEDConfigure |= 0x10;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 On
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 On */
>  						pHwData->LED_Blinking = 1;
>  						TimeInterval = 300;
>  					} else {
>  						reg->U1BC_LEDConfigure &= ~0x10;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
>  						pHwData->LED_Blinking = 0;
>  						TimeInterval = 300;
>  					}
>  				} else {
> -					//Turn Off LED_0
> +					/* Turn Off LED_0 */
>  					if (reg->U1BC_LEDConfigure & 0x10) {
>  						reg->U1BC_LEDConfigure &= ~0x10;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
>  					}
>  				}
>  			} else {
> -				// Turn On LED_0
> +				/* Turn On LED_0 */
>  				if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
>  					reg->U1BC_LEDConfigure |= 0x10;
> -					Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
> +					Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
>  				}
>  			}
>  			break;
> -
> -		case 6:	// [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
> -			if (!pHwData->LED_LinkOn)	// Blink only if not Link On
> -			{
> -				// Blinking if scanning is on progress
> +		case 6:	/* [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */
> +			if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
> +				/* Blinking if scanning is on progress */
>  				if (pHwData->LED_Scanning) {
>  					if (pHwData->LED_Blinking == 0) {
>  						reg->U1BC_LEDConfigure &= ~0xf;
>  						reg->U1BC_LEDConfigure |= 0x10;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 On
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 On */
>  						pHwData->LED_Blinking = 1;
>  						TimeInterval = 300;
>  					} else {
>  						reg->U1BC_LEDConfigure &= ~0x1f;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
>  						pHwData->LED_Blinking = 0;
>  						TimeInterval = 300;
>  					}
>  				} else {
> -					// 20060901 Gray blinking if in disconnect state and not scanning
> +					/* Gray blinking if in disconnect state and not scanning */
>  					ltmp = reg->U1BC_LEDConfigure;
>  					reg->U1BC_LEDConfigure &= ~0x1f;
>  					if (LED_GRAY2[(pHwData->LED_Blinking % 30)]) {
> @@ -494,85 +484,78 @@ static void hal_led_control(unsigned long data)
>  					}
>  					pHwData->LED_Blinking++;
>  					if (reg->U1BC_LEDConfigure != ltmp)
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
>  					TimeInterval = 100;
>  				}
>  			} else {
> -				// Turn On LED_0
> +				/* Turn On LED_0 */
>  				if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
>  					reg->U1BC_LEDConfigure |= 0x10;
> -					Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
> +					Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
>  				}
>  			}
>  			break;
> -
> -		case 5:	// [101] Only 1 Led be placed on PCB and use LED_1 for showing
> -			if (!pHwData->LED_LinkOn)	// Blink only if not Link On
> -			{
> -				// Blinking if scanning is on progress
> +		case 5:	/* [101] Only 1 Led be placed on PCB and use LED_1 for showing */
> +			if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
> +				/* Blinking if scanning is on progress */
>  				if (pHwData->LED_Scanning) {
>  					if (pHwData->LED_Blinking == 0) {
> -						reg->U1BC_LEDConfigure |=
> -						    0x1000;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 On
> +						reg->U1BC_LEDConfigure |= 0x1000;
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 On */
>  						pHwData->LED_Blinking = 1;
>  						TimeInterval = 300;
>  					} else {
> -						reg->U1BC_LEDConfigure &=
> -						    ~0x1000;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 Off
> +						reg->U1BC_LEDConfigure &= ~0x1000;
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 Off */
>  						pHwData->LED_Blinking = 0;
>  						TimeInterval = 300;
>  					}
>  				} else {
> -					//Turn Off LED_1
> +					/* Turn Off LED_1 */
>  					if (reg->U1BC_LEDConfigure & 0x1000) {
> -						reg->U1BC_LEDConfigure &=
> -						    ~0x1000;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 Off
> +						reg->U1BC_LEDConfigure &= ~0x1000;
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 Off */
>  					}
>  				}
>  			} else {
> -				// Is transmitting/receiving ??
> +				/* Is transmitting/receiving ?? */
>  				if ((adapter->RxByteCount !=
>  				     pHwData->RxByteCountLast)
>  				    || (adapter->TxByteCount !=
>  					pHwData->TxByteCountLast)) {
>  					if ((reg->U1BC_LEDConfigure & 0x3000) !=
>  					    0x3000) {
> -						reg->U1BC_LEDConfigure |=
> -						    0x3000;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 On
> +						reg->U1BC_LEDConfigure |= 0x3000;
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 On */
>  					}
> -					// Update variable
> +					/* Update variable */
>  					pHwData->RxByteCountLast =
>  					    adapter->RxByteCount;
>  					pHwData->TxByteCountLast =
>  					    adapter->TxByteCount;
>  					TimeInterval = 200;
>  				} else {
> -					// Turn On LED_1 and blinking if transmitting/receiving
> +					/* Turn On LED_1 and blinking if transmitting/receiving */
>  					if ((reg->U1BC_LEDConfigure & 0x3000) !=
>  					    0x1000) {
>  						reg->U1BC_LEDConfigure &=
>  						    ~0x3000;
>  						reg->U1BC_LEDConfigure |=
>  						    0x1000;
> -						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 On
> +						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 On */
>  					}
>  				}
>  			}
>  			break;
> -
> -		default:	// Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
> +		default: /* Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active */
>  			if ((reg->U1BC_LEDConfigure & 0x3000) != 0x3000) {
> -				reg->U1BC_LEDConfigure |= 0x3000;	// LED_1 is always on and event enable
> +				reg->U1BC_LEDConfigure |= 0x3000;	/* LED_1 is always on and event enable */
>  				Wb35Reg_Write(pHwData, 0x03bc,
>  					      reg->U1BC_LEDConfigure);
>  			}
>  
>  			if (pHwData->LED_Blinking) {
> -				// Gray blinking
> +				/* Gray blinking */
>  				reg->U1BC_LEDConfigure &= ~0x0f;
>  				reg->U1BC_LEDConfigure |= 0x10;
>  				reg->U1BC_LEDConfigure |=
> @@ -584,7 +567,7 @@ static void hal_led_control(unsigned long data)
>  				if (pHwData->LED_Blinking < 40)
>  					TimeInterval = 100;
>  				else {
> -					pHwData->LED_Blinking = 0;	// Stop blinking
> +					pHwData->LED_Blinking = 0; /* Stop blinking */
>  					reg->U1BC_LEDConfigure &= ~0x0f;
>  					Wb35Reg_Write(pHwData, 0x03bc,
>  						      reg->U1BC_LEDConfigure);
> @@ -593,16 +576,14 @@ static void hal_led_control(unsigned long data)
>  			}
>  
>  			if (pHwData->LED_LinkOn) {
> -				if (!(reg->U1BC_LEDConfigure & 0x10))	// Check the LED_0
> -				{
> -					//Try to turn ON LED_0 after gray blinking
> +				if (!(reg->U1BC_LEDConfigure & 0x10)) { /* Check the LED_0 */
> +					/* Try to turn ON LED_0 after gray blinking */
>  					reg->U1BC_LEDConfigure |= 0x10;
> -					pHwData->LED_Blinking = 1;	//Start blinking
> +					pHwData->LED_Blinking = 1; /* Start blinking */
>  					TimeInterval = 50;
>  				}
>  			} else {
> -				if (reg->U1BC_LEDConfigure & 0x10)	// Check the LED_0
> -				{
> +				if (reg->U1BC_LEDConfigure & 0x10) { /* Check the LED_0 */
>  					reg->U1BC_LEDConfigure &= ~0x10;
>  					Wb35Reg_Write(pHwData, 0x03bc,
>  						      reg->U1BC_LEDConfigure);
> @@ -611,7 +592,7 @@ static void hal_led_control(unsigned long data)
>  			break;
>  		}
>  
> -		//20060828.1 Active send null packet to avoid AP disconnect
> +		/* Active send null packet to avoid AP disconnect */
>  		if (pHwData->LED_LinkOn) {
>  			pHwData->NullPacketCount += TimeInterval;
>  			if (pHwData->NullPacketCount >=
> @@ -622,7 +603,7 @@ static void hal_led_control(unsigned long data)
>  	}
>  
>  	pHwData->time_count += TimeInterval;
> -	Wb35Tx_CurrentTime(adapter, pHwData->time_count);	// 20060928 add
> +	Wb35Tx_CurrentTime(adapter, pHwData->time_count);
>  	pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
>  	add_timer(&pHwData->LEDTimer);
>  }
> @@ -654,7 +635,7 @@ static int hal_init_hardware(struct ieee80211_hw *hw)
>  	SoftwareSet = hal_software_set(pHwData);
>  
>  #ifdef Vendor2
> -	// Try to make sure the EEPROM contain
> +	/* Try to make sure the EEPROM contain */
>  	SoftwareSet >>= 8;
>  	if (SoftwareSet != 0x82)
>  		return false;

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/