On Thu, Apr 01, 2010 at 05:56:43PM +0200, Joerg Roedel wrote:
quoted text
> On Thu, Apr 01, 2010 at 10:47:36AM -0400, Neil Horman wrote:
> > On Thu, Apr 01, 2010 at 04:29:02PM +0200, Joerg Roedel wrote:
> > > I am back in office next tuesday and will look into this problem too.
> > > 
> > Thank you.
> 
> Just took a look and I think the problem is that the devices are
> attached to domains before the IOMMU hardware is enabled. This happens
> in the function prealloc_protection_domains(). The attach code issues
> the dte-invalidate commands but they are not executed because the
> hardware is off. I will verify this when I have access to hardware
> again.
> The possible fix will be to enable the hardware earlier in the
> initialization path.
> 
That sounds like a reasonable theory, I'll try hack something together shortly.

quoted text
> > > Right. The default for all devices is to forbid DMA.
> > > 
> > Thanks, glad to know I read that right, took me a bit to understand it :)
> 
> I should probably add a comment :-)
> 
> > > Thats indeed true. I have seen that with ixgbe cards for example. They
> > > seem to be really confused after an target abort.
> > > 
> > Yeah, this part worries me, target aborts lead to various brain dead hardware
> > pieces.  What are you thoughts on leaving the iommu on through a reboot to avoid
> > this issue (possibly resetting any pci device that encounters a target abort, as
> > noted in the error log on the iommu?
> 
> This would only prevent possible data corruption. When the IOMMU is off
> the devices will not get a target abort but will only write to different
> physical memory locations. The window where a target abort can happen
> starts when the kdump kernel re-enables the IOMMU and ends when the new
> driver for that device attaches. This is a small window but there is not
> a lot we can do to avoid this small time window.
> 
Can you explain this a bit further please?  From what I read, when the iommu is
disabled, AIUI it does no translations.  That means that any dma addresses which
the driver mapped via the iommu prior to a crash that are stored in devices will
just get strobed on the bus without any translation.  If those dma address do
not lay on top of any physical ram, won't that lead to bus errors, and
transaction aborts?  Worse, if those dma addresses do lie on top of real
physical addresses, won't we get corruption in various places?  Or am I missing
part of how that works?

Regards
Neil

quoted text
> 	Joerg
> 
> 
> _______________________________________________
> kexec mailing list
> kexec@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/