(2010/03/02 10:55), Huang Ying wrote:
quoted text
> ... The firmware_first setup code is moved from PCI core to
> AER driver too, because it is only AER related.
(snip)
quoted text
> diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
> index c843a79..cc527c1 100644
> --- a/drivers/pci/pcie/aer/aerdrv_core.c
> +++ b/drivers/pci/pcie/aer/aerdrv_core.c
> @@ -858,6 +858,8 @@ void aer_delete_rootport(struct aer_rpc *rpc)
>   */
>  int aer_init(struct pcie_device *dev)
>  {
> +	aer_set_firmware_first(dev);
> +
>  	if (dev->port->aer_firmware_first) {
>  		dev_printk(KERN_DEBUG, &dev->device,
>  			   "PCIe errors handled by platform firmware.\n");
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 2a94309..ccfaf19 100644
(snip)
quoted text
> @@ -935,7 +928,6 @@ int pci_setup_device(struct pci_dev *dev)
>  	dev->multifunction = !!(hdr_type & 0x80);
>  	dev->error_state = pci_channel_io_normal;
>  	set_pcie_port_type(dev);
> -	set_pci_aer_firmware_first(dev);
>  
>  	list_for_each_entry(slot, &dev->bus->slots, list)
>  		if (PCI_SLOT(dev->devfn) == slot->number)

The aer_init() will be called for root ports, but not for end point
devices or so on.  So please remain the firmware_first setup code in
PCI core.  Otherwise endpoint drivers will get success on call of
pci_enable_pcie_error_reporting() regardless of the firmware first.


Thanks,
H.Seto

--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/