Hi Angelo,

On Thu, Dec 30, 2010 at 04:05:09PM +0100, Angelo Dureghello wrote:
quoted text
> Hi Greg and All,
> infinite thanks, i solved finally my issue and the board is fully working.
> 
> I used IRQ7 line, casually, and unfortunately it was wrong.
> IRQ7 is a special autovectored interrupt, in particular, it is an
> EDGE interrupt, and not a LEVEL interrupt like IRQ1 to 6.
> 
> I used IRQ1 now, a normal level interrupt, and everything works perfect.
> 
> So i have dm9000 and MCF5307 (big-endian cpu) fully working with 32
> bit bus straight wired D0:31 to the dm9000, and would like to share
> my patch to dm9000.c, so maybe in next kernel versions dm9000 maybe
> could be enabled as default. Let me know eventually the procedure
> for this.

Just send the patch to the netdev mailing list. For additional instructions 
see Documentation/SubmitChecklist and Documentation/SubmittingPatches. Once 
you submitted you patch you can track the status of your patch at 
http://patchwork.ozlabs.org/project/netdev/list/.

baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/