On Fri, Dec 24, 2010 at 11:40:50AM +0900, Tomoya MORINAGA wrote:
quoted text
> It seems spi_topcliff_pch of linux-2.6.37-rc6 degraded by previous patch.
> In fact, data transfer fails on evaluation board testing.
> I found like the following register miss-setting line.
> Using this patch, I have confirmed data transfer can work well.
> 
> Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>

Looks okay to me, but I'm not an expert on the device.  I've picked
this patch up into my next-spi branch, but I can drop it if anyone has
concerns.

g.

quoted text
> ---
>  drivers/spi/spi_topcliff_pch.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c
> index 58e187f..56b7588 100644
> --- a/drivers/spi/spi_topcliff_pch.c
> +++ b/drivers/spi/spi_topcliff_pch.c
> @@ -267,7 +267,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
>  	if (reg_spsr_val & SPSR_FI_BIT) {
>  		/* disable FI & RFI interrupts */
>  		pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
> -				   SPCR_FIE_BIT | SPCR_TFIE_BIT);
> +				   SPCR_FIE_BIT | SPCR_RFIE_BIT);
>  
>  		/* transfer is completed;inform pch_spi_process_messages */
>  		data->transfer_complete = true;
> @@ -679,11 +679,11 @@ static void pch_spi_set_ir(struct pch_spi_data *data)
>  	if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) {
>  		/* set receive threhold to PCH_RX_THOLD */
>  		pch_spi_setclr_reg(data->master, PCH_SPCR,
> -				   PCH_RX_THOLD << SPCR_TFIC_FIELD,
> -				   ~MASK_TFIC_SPCR_BITS);
> +				   PCH_RX_THOLD << SPCR_RFIC_FIELD,
> +				   ~MASK_RFIC_SPCR_BITS);
>  		/* enable FI and RFI interrupts */
>  		pch_spi_setclr_reg(data->master, PCH_SPCR,
> -				   SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0);
> +				   SPCR_RFIE_BIT | SPCR_FIE_BIT, 0);
>  	} else {
>  		/* set receive threhold to maximum */
>  		pch_spi_setclr_reg(data->master, PCH_SPCR,
> -- 
> 1.6.0.6
> 
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/