On December 22, 2010, Rafael J. Wysocki wrote:
quoted text
> On Wednesday, December 15, 2010, Thomas Fjellstrom wrote:
> > I can't seem to get wol to work with my desktop, which has an integrated
> > ATL1 GbE nic. I can't be absolutely sure if it ever worked, but I think
> > it did at one point. I can use ethtool to look at the wol status, that
> > it supports magic-packet wol, and I can enable it, which is done at boot
> > using an init script. But No matter how many times I try to send a wol
> > packet to that machine it never wakes up.
> > 
> > Looking around on the net seems to say it is supported, and should work,
> > but I'm not having any luck. Anyone have any hints?
> 
> It works for me with 2.6.37-rc7 and the appended patch applied (at least
> the machine is woken up from suspend to RAM).  Of course, the adapter
> needs to be configured for that with the help of ethtool.

Hi, thanks for making quick work of this. I have one slight problem, my nic 
seems to use the atl1 driver, and not atl1c. I've tried using atl1c and atl1e, 
both will load if I modprobe them, but neither actually bring up the device. 
Even tried blacklisting atl1 first.

quoted text
> Thanks,
> Rafael
> 
> ---
> From: Rafael J. Wysocki <rjw@sisk.pl>
> Subject: atl1c: Do not use legacy PCI power management
> 
> The atl1c driver uses the legacy PCI power management, so it has to
> do some PCI-specific things in its ->suspend() and ->resume()
> callbacks and they are not done correctly.
> 
> Convert atl1c to the new PCI power management framework and make it
> let the PCI subsystem handle all of the PCI-specific aspects of
> device handling during system power transitions.
> 
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> ---
>  drivers/net/atl1c/atl1c_main.c |   39
> +++++++++++++++------------------------ 1 file changed, 15 insertions(+),
> 24 deletions(-)
> 
> Index: linux-2.6/drivers/net/atl1c/atl1c_main.c
> ===================================================================
> --- linux-2.6.orig/drivers/net/atl1c/atl1c_main.c
> +++ linux-2.6/drivers/net/atl1c/atl1c_main.c
> @@ -702,6 +702,7 @@ static int __devinit atl1c_sw_init(struc
> 
> 
>  	adapter->wol = 0;
> +	device_set_wakeup_enable(&pdev->dev, false);
>  	adapter->link_speed = SPEED_0;
>  	adapter->link_duplex = FULL_DUPLEX;
>  	adapter->num_rx_queues = AT_DEF_RECEIVE_QUEUE;
> @@ -2444,8 +2445,9 @@ static int atl1c_close(struct net_device
>  	return 0;
>  }
> 
> -static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
> +static int atl1c_suspend(struct device *dev)
>  {
> +	struct pci_dev *pdev = to_pci_dev(dev);
>  	struct net_device *netdev = pci_get_drvdata(pdev);
>  	struct atl1c_adapter *adapter = netdev_priv(netdev);
>  	struct atl1c_hw *hw = &adapter->hw;
> @@ -2454,7 +2456,6 @@ static int atl1c_suspend(struct pci_dev
>  	u32 wol_ctrl_data = 0;
>  	u16 mii_intr_status_data = 0;
>  	u32 wufc = adapter->wol;
> -	int retval = 0;
> 
>  	atl1c_disable_l0s_l1(hw);
>  	if (netif_running(netdev)) {
> @@ -2462,9 +2463,6 @@ static int atl1c_suspend(struct pci_dev
>  		atl1c_down(adapter);
>  	}
>  	netif_device_detach(netdev);
> -	retval = pci_save_state(pdev);
> -	if (retval)
> -		return retval;
> 
>  	if (wufc)
>  		if (atl1c_phy_power_saving(hw) != 0)
> @@ -2525,12 +2523,8 @@ static int atl1c_suspend(struct pci_dev
>  		AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
>  		AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
> 
> -		/* pcie patch */
> -		device_set_wakeup_enable(&pdev->dev, 1);
> -
>  		AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT |
>  			GPHY_CTRL_EXT_RESET);
> -		pci_prepare_to_sleep(pdev);
>  	} else {
>  		AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_POWER_SAVING);
>  		master_ctrl_data |= MASTER_CTRL_CLK_SEL_DIS;
> @@ -2540,25 +2534,17 @@ static int atl1c_suspend(struct pci_dev
>  		AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
>  		AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
>  		hw->phy_configured = false; /* re-init PHY when resume */
> -		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
>  	}
> 
> -	pci_disable_device(pdev);
> -	pci_set_power_state(pdev, pci_choose_state(pdev, state));
> -
>  	return 0;
>  }
> 
> -static int atl1c_resume(struct pci_dev *pdev)
> +static int atl1c_resume(struct device *dev)
>  {
> +	struct pci_dev *pdev = to_pci_dev(dev);
>  	struct net_device *netdev = pci_get_drvdata(pdev);
>  	struct atl1c_adapter *adapter = netdev_priv(netdev);
> 
> -	pci_set_power_state(pdev, PCI_D0);
> -	pci_restore_state(pdev);
> -	pci_enable_wake(pdev, PCI_D3hot, 0);
> -	pci_enable_wake(pdev, PCI_D3cold, 0);
> -
>  	AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
>  	atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
>  			ATL1C_PCIE_PHY_RESET);
> @@ -2582,7 +2568,12 @@ static int atl1c_resume(struct pci_dev *
> 
>  static void atl1c_shutdown(struct pci_dev *pdev)
>  {
> -	atl1c_suspend(pdev, PMSG_SUSPEND);
> +	struct net_device *netdev = pci_get_drvdata(pdev);
> +	struct atl1c_adapter *adapter = netdev_priv(netdev);
> +
> +	atl1c_suspend(&pdev->dev);
> +	pci_wake_from_d3(pdev, adapter->wol);
> +	pci_set_power_state(pdev, PCI_D3hot);
>  }
> 
>  static const struct net_device_ops atl1c_netdev_ops = {
> @@ -2886,16 +2877,16 @@ static struct pci_error_handlers atl1c_e
>  	.resume = atl1c_io_resume,
>  };
> 
> +static SIMPLE_DEV_PM_OPS(atl1c_pm_ops, atl1c_suspend, atl1c_resume);
> +
>  static struct pci_driver atl1c_driver = {
>  	.name     = atl1c_driver_name,
>  	.id_table = atl1c_pci_tbl,
>  	.probe    = atl1c_probe,
>  	.remove   = __devexit_p(atl1c_remove),
> -	/* Power Managment Hooks */
> -	.suspend  = atl1c_suspend,
> -	.resume   = atl1c_resume,
>  	.shutdown = atl1c_shutdown,
> -	.err_handler = &atl1c_err_handler
> +	.err_handler = &atl1c_err_handler,
> +	.driver.pm = &atl1c_pm_ops,
>  };
> 
>  /*


-- 
Thomas Fjellstrom
thomas@fjellstrom.ca
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/