Hi Sascha,
2010/12/20 Sascha Hauer <s.hauer@pengutronix.de>:
quoted text > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> arch/arm/mach-mx5/Kconfig | 1 +
> arch/arm/mach-mx5/board-mx51_babbage.c | 74 ++++++++++++++++++++++++++++++++
> 2 files changed, 75 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
> index 5011f42..2a936b7 100644
> --- a/arch/arm/mach-mx5/Kconfig
> +++ b/arch/arm/mach-mx5/Kconfig
> @@ -22,6 +22,7 @@ config MACH_MX51_BABBAGE
> select IMX_HAVE_PLATFORM_IMX_UART
> select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
> select IMX_HAVE_PLATFORM_SPI_IMX
> + select IMX_HAVE_PLATFORM_IMX_IPUV3
> help
> Include support for MX51 Babbage platform, also known as MX51EVK in
> u-boot. This includes specific configurations for the board and its
> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
> index 368a315..6c1576c 100644
> --- a/arch/arm/mach-mx5/board-mx51_babbage.c
> +++ b/arch/arm/mach-mx5/board-mx51_babbage.c
> @@ -22,11 +22,13 @@
> #include <linux/input.h>
> #include <linux/spi/flash.h>
> #include <linux/spi/spi.h>
> +#include <linux/mfd/imx-ipu-v3.h>
>
> #include <mach/common.h>
> #include <mach/hardware.h>
> #include <mach/iomux-mx51.h>
> #include <mach/mxc_ehci.h>
> +#include <mach/ipu-v3.h>
>
Why it needs imx-ipu-v3.h and ipu-v3.h?
quoted text > #include <asm/irq.h>
> #include <asm/setup.h>
> @@ -158,6 +160,41 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
> MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
> MX51_PAD_CSPI1_SS0__GPIO_4_24,
> MX51_PAD_CSPI1_SS1__GPIO_4_25,
> +
> + /* Display */
> + MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
> + MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
> + MX51_PAD_NANDF_D12__GPIO_3_28,
> +
> + MX51_PAD_DISP1_DAT0__DISP1_DAT0,
> + MX51_PAD_DISP1_DAT1__DISP1_DAT1,
> + MX51_PAD_DISP1_DAT2__DISP1_DAT2,
> + MX51_PAD_DISP1_DAT3__DISP1_DAT3,
> + MX51_PAD_DISP1_DAT4__DISP1_DAT4,
> + MX51_PAD_DISP1_DAT5__DISP1_DAT5,
> + MX51_PAD_DISP1_DAT6__DISP1_DAT6,
> + MX51_PAD_DISP1_DAT7__DISP1_DAT7,
> + MX51_PAD_DISP1_DAT8__DISP1_DAT8,
> + MX51_PAD_DISP1_DAT9__DISP1_DAT9,
> + MX51_PAD_DISP1_DAT10__DISP1_DAT10,
> + MX51_PAD_DISP1_DAT11__DISP1_DAT11,
> + MX51_PAD_DISP1_DAT12__DISP1_DAT12,
> + MX51_PAD_DISP1_DAT13__DISP1_DAT13,
> + MX51_PAD_DISP1_DAT14__DISP1_DAT14,
> + MX51_PAD_DISP1_DAT15__DISP1_DAT15,
> + MX51_PAD_DISP1_DAT16__DISP1_DAT16,
> + MX51_PAD_DISP1_DAT17__DISP1_DAT17,
> + MX51_PAD_DISP1_DAT18__DISP1_DAT18,
> + MX51_PAD_DISP1_DAT19__DISP1_DAT19,
> + MX51_PAD_DISP1_DAT20__DISP1_DAT20,
> + MX51_PAD_DISP1_DAT21__DISP1_DAT21,
> + MX51_PAD_DISP1_DAT22__DISP1_DAT22,
> + MX51_PAD_DISP1_DAT23__DISP1_DAT23,
> +#define MX51_PAD_DI_GP4__IPU_DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, 0x0, 0, NO_PAD_CTRL)
> + MX51_PAD_DI_GP4__IPU_DI2_PIN15,
> +
> + /* I2C DVI enable */
> + MX51_PAD_CSI2_HSYNC__GPIO_4_14,
> };
>
> /* Serial ports */
> @@ -346,6 +383,23 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
> .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
> };
>
> +static struct ipuv3_fb_platform_data babbage_fb0_data = {
> + .interface_pix_fmt = IPU_PIX_FMT_RGB24,
> + .flags = IMX_IPU_FB_USE_MODEDB | IMX_IPU_FB_USE_OVERLAY,
> + .display = 0,
> +};
> +
> +static struct ipuv3_fb_platform_data babbage_fb1_data = {
> + .interface_pix_fmt = IPU_PIX_FMT_RGB565,
> + .flags = IMX_IPU_FB_USE_MODEDB,
> + .display = 1,
> +};
> +
> +static struct imx_ipuv3_platform_data ipu_data = {
> + .fb_head0_platform_data = &babbage_fb0_data,
> + .fb_head1_platform_data = &babbage_fb1_data,
> +};
> +
> /*
> * Board specific initialization.
> */
> @@ -392,6 +446,26 @@ static void __init mxc_board_init(void)
> ARRAY_SIZE(mx51_babbage_spi_board_info));
> imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
> imx51_add_imx2_wdt(0, NULL);
> +
> +#define GPIO_DVI_DETECT (2 * 32 + 28)
> +#define GPIO_DVI_RESET (2 * 32 + 5)
> +#define GPIO_DVI_PWRDN (2 * 32 + 6)
> +#define GPIO_DVI_I2C (3 * 32 + 14)
This should be in board-xxx.h.
quoted text > +
> + /* DVI Detect */
> + gpio_request(GPIO_DVI_DETECT, "dvi detect");
> + gpio_direction_input(GPIO_DVI_DETECT);
> + /* DVI Reset - Assert for i2c disabled mode */
> + gpio_request(GPIO_DVI_RESET, "dvi reset");
> + gpio_direction_output(GPIO_DVI_RESET, 0);
> + /* DVI Power-down */
> + gpio_request(GPIO_DVI_PWRDN, "dvi pwdn");
> + gpio_direction_output(GPIO_DVI_PWRDN, 1);
> +
> + gpio_request(GPIO_DVI_I2C, "dvi i2c");
> + gpio_direction_output(GPIO_DVI_I2C, 0);
> +
Can this implement as function, and passes to specified driver who needs it?
quoted text > + imx51_add_ipuv3(&ipu_data);
> }
>
> static void __init mx51_babbage_timer_init(void)
> --
> 1.7.2.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to
majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
cheers,
jay
--
unsubscribe notice To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
majordomo@vger.kernel.org
More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.tux.org/lkml/ Messages in current thread:
Re: [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support , arden jay , (Mon Dec 20, 5:35 am)
