On Mon, Dec 13, 2010 at 08:07:20PM -0800, Jesse Gross wrote:
quoted text
> On Mon, Dec 13, 2010 at 2:45 PM, Matt Carlson <mcarlson@broadcom.com> wrote:
> > On Sun, Dec 12, 2010 at 04:11:13PM -0800, Jesse Gross wrote:
> >> On Mon, Dec 6, 2010 at 1:27 PM, Michael Leun
> >> <lkml20101129@newton.leun.net> wrote:
> >> > On Mon, 6 Dec 2010 12:04:48 -0800
> >> > Jesse Gross <jesse@nicira.com> wrote:
> >> >
> >> >> On Mon, Dec 6, 2010 at 11:34 AM, Michael Leun
> >> >> <lkml20101129@newton.leun.net> wrote:
> >> >> > On Mon, 6 Dec 2010 10:14:55 -0800
> >> >> > Jesse Gross <jesse@nicira.com> wrote:
> >> >> >
> >> >> >> On Sun, Dec 5, 2010 at 2:44 AM, Michael Leun
> >> >> >> <lkml20101129@newton.leun.net> wrote:
> >> >> >> > Hi Jesse,
> >> >> >> >
> >> >> >> > On Sun, 5 Dec 2010 10:55:28 +0100
> >> >> >> > Michael Leun <lkml20101129@newton.leun.net> wrote:
> >> >> >> >
> >> >> >> >> On Sun, 05 Dec 2010 09:03:53 +0100
> >> >> >> >> Eric Dumazet <eric.dumazet@gmail.com> wrote:
> >> >> >> >>
> >> >> >> >> > > But on
> >> >> >> >> > >
> >> >> >> >> > > hpdl320g5:/home/ml # lspci | grep Eth
> >> >> >> >> > > 03:04.0 Ethernet controller: Broadcom Corporation NetXtreme
> >> >> >> >> > > BCM5714 Gigabit Ethernet (rev a3) 03:04.1 Ethernet
> >> >> >> >> > > controller: Broadcom Corporation NetXtreme BCM5714 Gigabit
> >> >> >> >> > > Ethernet (rev a3)
> >> >> >> >> > >
> >> >> >> >> > > the good message is that it also does not crash, but with
> >> >> >> >> > > tcpdump I see vlan tags when no vlan devices configured on
> >> >> >> >> > > the respective eth, if so I do not see tags anymore vlan
> >> >> >> >> > > tags on the trunk interface.
> >> >> >> >> > >
> >> >> >> >> >
> >> >> >> >> > For all these very specific needs, you'll have to try 2.6.37
> >> >> >> >> > I am afraid. Jesse did huge changes to exactly make this
> >> >> >> >> > working, we wont backport this to 2.6.36, but only avoid
> >> >> >> >> > crashes.
> >> >> >> >>
> >> >> >> >> OK, I'm perfectly fine with that, of course, actually nice to
> >> >> >> >> hear that the issue already is addressed.
> >> >> >> >>
> >> >> >> >> Likely I'll give some rc an shot on this machine (maybe over
> >> >> >> >> christmas), but it is an production machine (acutally testing
> >> >> >> >> other devices is the "product" produced on this machine), so
> >> >> >> >> unfortunately I'm not that free in when and what I can do (but
> >> >> >> >> the possibility to, for example, bridge the trunk interface
> >> >> >> >> would make testing easier, that justifies something...).
> >> >> >> >>
> >> >> >> >> Thank you all very much for your work.
> >> >> >> >
> >> >> >> > Are these changes already in 2.6.37-rc4? Or, if not are they
> >> >> >> > somewhere publically available already?
> >> >> >> >
> >> >> >> > I looked into various changelogs but have some difficulties to
> >> >> >> > identify them...
> >> >> >> >
> >> >> >> > Maybe I have some time next days to give them an try...
> >> >> >>
> >> >> >> Yes, all of the existing vlan changes are in 2.6.37-rc4. ?There
> >> >> >> were a number of patches but the main one was
> >> >> >> 3701e51382a026cba10c60b03efabe534fba4ca4
> >> >> >
> >> >> > Then, I'm afraid, this (seeing vlan tags even if vlan interfaces are
> >> >> > configured) does not work on HP DL320G5 (for exact description and
> >> >> > examples please see my mail a few days ago).
> >> >>
> >> >> What driver are you using? ?Is it tg3?
> >> >>
> >> >> The vlan changes that I made unfortunately require updating drivers to
> >> >> get the full benefit. ?I've been busy lately so tg3 hasn't yet been
> >> >> updated.
> >> >>
> >> >> I know that tg3 does some things differently depending on whether a
> >> >> vlan group is configured, so that would likely be the cause of what
> >> >> you are seeing. ?I'd have to look at it in more detail to be sure
> >> >> though.
> >> >>
> >> >> You said that everything works on the other Broadcom NIC that you
> >> >> tested? ?Maybe it uses bnx2 instead?
> >> >>
> >> >
> >> > Both machines use tg3 / 2.6.36.1 - one is opensuse, one ubuntu (but
> >> > this should not matter, I think).
> >> >
> >> > If I can do anything to support your investigations / work (most
> >> > likely testing / providing information) please let me know.
> >>
> >> Unfortunately, I probably won't have time to look at this in the near
> >> future. ?Given that the test works on one NIC but not another that
> >> strongly suggests that it is a driver problem, even if both NICs use
> >> the same driver. ?I see tg3 can do different things with vlans
> >> depending on the model and what features are enabled. ?I also ran a
> >> quick test on some of my machines and I didn't experience this issue.
> >> They are running net-next with ixgbe.
> >>
> >> One of the main goals of my general vlan changes was to remove as much
> >> logic as possible from the drivers and put it in the networking core,
> >> so we should in theory see consistent behavior. ?However, in 2.6.36
> >> and earlier, each driver knows about what vlan devices are configured
> >> and does different things with that information.
> >>
> >> Given all of that, the most logical step to me is simply to convert
> >> tg3 to use the new vlan infrastructure. ?It should be done regardless
> >> and it will probably solve this problem. ?Maybe you can convince the
> >> Broadcom guys to do that? ?It would be a lot faster for them to do it
> >> than me.
> >
> > Below is the patch that converts the tg3 driver over to the new API. ?I
> > don't see how it could fix the problem though. ?Maybe the presence of
> > NETIF_F_HW_VLAN_TX changes things.
> 
> Thanks Matt.
> 
> There's actually a little bit more that needs to be done for
> conversion.  All references to the vlan group should be gone since
> that logic has been moved to the networking core.
> tg3_vlan_rx_register() completely disappears and all other code
> contained in TG3_VLAN_TAG_USED is unconditionally active.  Ideally,
> there would be an Ethtool set_flags function so that the vlan
> offloading features could be enabled/disabled for situations like this
> to help with debugging.
> 
> The reason why I think that this might help is that the problem
> manifests when a vlan group is configured, even if that vlan isn't
> used.  Since this removes all logic about vlan groups from the driver,
> it should avoid any problems in that area.  It's possible that the
> actual issue is somewhere else but then it should be easier to find
> since we can separate out the different components.

Thanks for the comments Jesse.  Below is an updated patch.

Michael, I'm wondering if the difference in behavior can be explained by
the presence or absence of management firmware.  Can you look at the
driver sign-on messages in your syslogs for ASF[]?  I'm half expecting
the 5752 to show "ASF[0]" and the 5714 to show "ASF[1]".  If you see
this, and the below patch doesn't fix the problem, let me know.  I have
another test I'd like you to run.

----

[PATCH] tg3: Use new VLAN code

This patch pivots the tg3 driver to the new VLAN infrastructure.
All references to vlgrp have been removed and all VLAN code is
unconditionally active.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
---
 drivers/net/tg3.c |   95 +++++------------------------------------------------
 drivers/net/tg3.h |    3 --
 2 files changed, 9 insertions(+), 89 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 5faa87d..3682205 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -60,12 +60,6 @@
 #define BAR_0	0
 #define BAR_2	2
 
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-#define TG3_VLAN_TAG_USED 1
-#else
-#define TG3_VLAN_TAG_USED 0
-#endif
-
 #include "tg3.h"
 
 #define DRV_MODULE_NAME		"tg3"
@@ -134,9 +128,6 @@
 				 TG3_TX_RING_SIZE)
 #define NEXT_TX(N)		(((N) + 1) & (TG3_TX_RING_SIZE - 1))
 
-#define TG3_RX_DMA_ALIGN		16
-#define TG3_RX_HEADROOM			ALIGN(VLAN_HLEN, TG3_RX_DMA_ALIGN)
-
 #define TG3_DMA_BYTE_ENAB		64
 
 #define TG3_RX_STD_DMA_SZ		1536
@@ -4725,8 +4716,6 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 		struct sk_buff *skb;
 		dma_addr_t dma_addr;
 		u32 opaque_key, desc_idx, *post_ptr;
-		bool hw_vlan __maybe_unused = false;
-		u16 vtag __maybe_unused = 0;
 
 		desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
 		opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
@@ -4785,12 +4774,12 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 			tg3_recycle_rx(tnapi, tpr, opaque_key,
 				       desc_idx, *post_ptr);
 
-			copy_skb = netdev_alloc_skb(tp->dev, len + VLAN_HLEN +
+			copy_skb = netdev_alloc_skb(tp->dev, len +
 						    TG3_RAW_IP_ALIGN);
 			if (copy_skb == NULL)
 				goto drop_it_no_recycle;
 
-			skb_reserve(copy_skb, TG3_RAW_IP_ALIGN + VLAN_HLEN);
+			skb_reserve(copy_skb, TG3_RAW_IP_ALIGN);
 			skb_put(copy_skb, len);
 			pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE);
 			skb_copy_from_linear_data(skb, copy_skb->data, len);
@@ -4817,30 +4806,11 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 		}
 
 		if (desc->type_flags & RXD_FLAG_VLAN &&
-		    !(tp->rx_mode & RX_MODE_KEEP_VLAN_TAG)) {
-			vtag = desc->err_vlan & RXD_VLAN_MASK;
-#if TG3_VLAN_TAG_USED
-			if (tp->vlgrp)
-				hw_vlan = true;
-			else
-#endif
-			{
-				struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
-						    __skb_push(skb, VLAN_HLEN);
-
-				memmove(ve, skb->data + VLAN_HLEN,
-					ETH_ALEN * 2);
-				ve->h_vlan_proto = htons(ETH_P_8021Q);
-				ve->h_vlan_TCI = htons(vtag);
-			}
-		}
+		    !(tp->rx_mode & RX_MODE_KEEP_VLAN_TAG))
+			__vlan_hwaccel_put_tag(skb,
+					       desc->err_vlan & RXD_VLAN_MASK);
 
-#if TG3_VLAN_TAG_USED
-		if (hw_vlan)
-			vlan_gro_receive(&tnapi->napi, tp->vlgrp, vtag, skb);
-		else
-#endif
-			napi_gro_receive(&tnapi->napi, skb);
+		napi_gro_receive(&tnapi->napi, skb);
 
 		received++;
 		budget--;
@@ -5743,11 +5713,9 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
 		base_flags |= TXD_FLAG_TCPUDP_CSUM;
 	}
 
-#if TG3_VLAN_TAG_USED
 	if (vlan_tx_tag_present(skb))
 		base_flags |= (TXD_FLAG_VLAN |
 			       (vlan_tx_tag_get(skb) << 16));
-#endif
 
 	len = skb_headlen(skb);
 
@@ -5989,11 +5957,10 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
 			}
 		}
 	}
-#if TG3_VLAN_TAG_USED
+
 	if (vlan_tx_tag_present(skb))
 		base_flags |= (TXD_FLAG_VLAN |
 			       (vlan_tx_tag_get(skb) << 16));
-#endif
 
 	if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
 	    !mss && skb->len > VLAN_ETH_FRAME_LEN)
@@ -9538,17 +9505,8 @@ static void __tg3_set_rx_mode(struct net_device *dev)
 	/* When ASF is in use, we always keep the RX_MODE_KEEP_VLAN_TAG
 	 * flag clear.
 	 */
-#if TG3_VLAN_TAG_USED
-	if (!tp->vlgrp &&
-	    !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
-		rx_mode |= RX_MODE_KEEP_VLAN_TAG;
-#else
-	/* By definition, VLAN is disabled always in this
-	 * case.
-	 */
 	if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
 		rx_mode |= RX_MODE_KEEP_VLAN_TAG;
-#endif
 
 	if (dev->flags & IFF_PROMISC) {
 		/* Promiscuous mode. */
@@ -11233,31 +11191,6 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	return -EOPNOTSUPP;
 }
 
-#if TG3_VLAN_TAG_USED
-static void tg3_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
-{
-	struct tg3 *tp = netdev_priv(dev);
-
-	if (!netif_running(dev)) {
-		tp->vlgrp = grp;
-		return;
-	}
-
-	tg3_netif_stop(tp);
-
-	tg3_full_lock(tp, 0);
-
-	tp->vlgrp = grp;
-
-	/* Update RX_MODE_KEEP_VLAN_TAG bit in RX_MODE register. */
-	__tg3_set_rx_mode(dev);
-
-	tg3_netif_start(tp);
-
-	tg3_full_unlock(tp);
-}
-#endif
-
 static int tg3_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)
 {
 	struct tg3 *tp = netdev_priv(dev);
@@ -13069,9 +13002,7 @@ static struct pci_dev * __devinit tg3_find_peer(struct tg3 *);
 
 static void inline vlan_features_add(struct net_device *dev, unsigned long flags)
 {
-#if TG3_VLAN_TAG_USED
 	dev->vlan_features |= flags;
-#endif
 }
 
 static inline u32 tg3_rx_ret_ring_size(struct tg3 *tp)
@@ -13866,11 +13797,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	else
 		tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
 
-	tp->rx_offset = NET_IP_ALIGN + TG3_RX_HEADROOM;
+	tp->rx_offset = NET_IP_ALIGN;
 	tp->rx_copy_thresh = TG3_RX_COPY_THRESHOLD;
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
 	    (tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0) {
-		tp->rx_offset -= NET_IP_ALIGN;
+		tp->rx_offset = 0;
 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 		tp->rx_copy_thresh = ~(u16)0;
 #endif
@@ -14634,9 +14565,6 @@ static const struct net_device_ops tg3_netdev_ops = {
 	.ndo_do_ioctl		= tg3_ioctl,
 	.ndo_tx_timeout		= tg3_tx_timeout,
 	.ndo_change_mtu		= tg3_change_mtu,
-#if TG3_VLAN_TAG_USED
-	.ndo_vlan_rx_register	= tg3_vlan_rx_register,
-#endif
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= tg3_poll_controller,
 #endif
@@ -14653,9 +14581,6 @@ static const struct net_device_ops tg3_netdev_ops_dma_bug = {
 	.ndo_do_ioctl		= tg3_ioctl,
 	.ndo_tx_timeout		= tg3_tx_timeout,
 	.ndo_change_mtu		= tg3_change_mtu,
-#if TG3_VLAN_TAG_USED
-	.ndo_vlan_rx_register	= tg3_vlan_rx_register,
-#endif
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= tg3_poll_controller,
 #endif
@@ -14705,9 +14630,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
-#if TG3_VLAN_TAG_USED
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-#endif
 
 	tp = netdev_priv(dev);
 	tp->pdev = pdev;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index d62c8d9..f528243 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2808,9 +2808,6 @@ struct tg3 {
 	u32				rx_std_max_post;
 	u32				rx_offset;
 	u32				rx_pkt_map_sz;
-#if TG3_VLAN_TAG_USED
-	struct vlan_group		*vlgrp;
-#endif
 
 
 	/* begin "everything else" cacheline(s) section */
-- 
1.7.2.2


--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/