Re: [PATCH 1/3] USB: whci-hcd: move whci_hcd_id_table under #ifdef MODULE

Previous thread: [Patch v3] AM35xx: Craneboard: Add USB EHCI support by srinath on Wednesday, December 1, 2010 - 9:58 am. (3 messages)

Next thread: [PATCH] perf: add csv-style output to perf stat (v2) by Stephane Eranian on Wednesday, December 1, 2010 - 9:49 am. (6 messages)
From: Namhyung Kim
Date: Wednesday, December 1, 2010 - 10:45 am

Since whci_hcd_id_table is used only for module auto-loading
move it under #ifdef MODULE. This fixes following warning:

  CC      drivers/usb/host/whci/hcd.o
drivers/usb/host/whci/hcd.c:359: warning: ‘whci_hcd_id_table’ defined but not used

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
---
 drivers/usb/host/whci/hcd.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 72b6892..ee76401 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -355,12 +355,14 @@ static void __exit whci_hc_driver_exit(void)
 }
 module_exit(whci_hc_driver_exit);
 
+#ifdef MODULE
 /* PCI device ID's that we handle (so it gets loaded) */
 static struct pci_device_id whci_hcd_id_table[] = {
 	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
 	{ /* empty last entry */ }
 };
 MODULE_DEVICE_TABLE(pci, whci_hcd_id_table);
+#endif
 
 MODULE_DESCRIPTION("WHCI Wireless USB host controller driver");
 MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
-- 
1.7.0.4

--

From: Namhyung Kim
Date: Wednesday, December 1, 2010 - 10:45 am

Since whcrc_id_table is used only for module auto-loading
move it under #ifdef MODULE to fix following warning:

  CC      drivers/uwb/whc-rc.o
drivers/uwb/whc-rc.c:452: warning: ‘whcrc_id_table’ defined but not used

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Vrabel <david.vrabel@csr.com>
---
 drivers/uwb/whc-rc.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c
index 7349558..e3bd62a 100644
--- a/drivers/uwb/whc-rc.c
+++ b/drivers/uwb/whc-rc.c
@@ -448,12 +448,14 @@ static int whcrc_post_reset(struct umc_dev *umc)
 	return uwb_rc_post_reset(uwb_rc);
 }
 
+#ifdef MODULE
 /* PCI device ID's that we handle [so it gets loaded] */
 static struct pci_device_id whcrc_id_table[] = {
 	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
 	{ /* empty last entry */ }
 };
 MODULE_DEVICE_TABLE(pci, whcrc_id_table);
+#endif
 
 static struct umc_driver whcrc_driver = {
 	.name       = "whc-rc",
-- 
1.7.0.4

--

From: Namhyung Kim
Date: Wednesday, December 1, 2010 - 10:45 am

Since i1480_est_id_table is used only for module auto-loading
move it under #ifdef MODULE to fix following warning:

  CC      drivers/uwb/i1480/i1480-est.o
drivers/uwb/i1480/i1480-est.c:94: warning: ‘i1480_est_id_table’ defined but not used

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Vrabel <david.vrabel@csr.com>
---
 drivers/uwb/i1480/i1480-est.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c
index f2eb4d8..bcbaea2 100644
--- a/drivers/uwb/i1480/i1480-est.c
+++ b/drivers/uwb/i1480/i1480-est.c
@@ -86,6 +86,7 @@ MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
 MODULE_DESCRIPTION("i1480's Vendor Specific Event Size Tables");
 MODULE_LICENSE("GPL");
 
+#ifdef MODULE
 /**
  * USB device ID's that we handle
  *
@@ -97,3 +98,4 @@ static struct usb_device_id i1480_est_id_table[] = {
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, i1480_est_id_table);
+#endif
-- 
1.7.0.4

--

From: Greg KH
Date: Wednesday, December 1, 2010 - 12:37 pm

Ick, no, please just use the __used type instead.  We don't want #ifdefs
in .c files if at all possible.

Same goes for the other 2 patches, care to redo them as well?

thanks,

greg k-h
--

From: Namhyung Kim
Date: Wednesday, December 1, 2010 - 1:32 pm

OK. Will send them again.

-- 
Regards,
Namhyung Kim
--

Previous thread: [Patch v3] AM35xx: Craneboard: Add USB EHCI support by srinath on Wednesday, December 1, 2010 - 9:58 am. (3 messages)

Next thread: [PATCH] perf: add csv-style output to perf stat (v2) by Stephane Eranian on Wednesday, December 1, 2010 - 9:49 am. (6 messages)