Pete Zaitcev wrote:
quoted text
> On Sat, 13 Nov 2010 23:15:16 +0100
> Németh Márton <nm127@freemail.hu> wrote:
> 
>> The length of the isochronous packets were not computed correctly in case of memory
>> mapped operation because the gaps between the isodesc data were not taken into
>> account. The last data byte can be found at offset+actual_length of the
>> last ISO description.
> 
> Indeed this is a bug, thanks for doing the legwork to find it. However,
> I would rather describe it as "received ISO buffer has gaps and
> actual_length is a length of actually transferred data segments,
> not whole buffer". Your own Bugzilla entry has a better explanation:
> 
>> The second packet contains the completed URB. In the user space we see that
>> there are 1000 data bytes in this URB. This data is spread between ISO blocks
>> 0...5 giving 155+160+185+174+156+170=1000. ISO desc 6...12 have zero length
>> each. ISO desciptors 13..23 are not completed (-EXDEV). The problem is that the
>> first 1000 bytes transfered from the kernel contains 800 bytes from the isodesc
>> 0 out of 155 bytes are used. The next 800 bytes are not transfered completely,
>> only the first 200 bytes out of 16 bytes are used. Then isodesc 2...5 are not
>> transfered at all.
> 
> I think we should just include this in the patch header.

Feel free to use any description you think worth including.

quoted text
> 
>> +++ linux-2.6.37-rc1/drivers/usb/mon/mon_bin.c	2010-11-13 22:29:09.000000000 +0100
>> @@ -515,6 +515,26 @@ static void mon_bin_event(struct mon_rea
>>  	}
>>
>>  	if (rp->mmap_active) {
>> +		if (usb_endpoint_xfer_isoc(epd) &&
>> +		    ((usb_urb_dir_in(urb) && ev_type == 'C') ||
>> +		     (usb_urb_dir_out(urb) && ev_type == 'S'))) {
>> +			int i;
>> +
>> +			/* Search for the last ISO descritor with OK status
>> +			 * and non-zero length
>> +			 */
>> +			length = 0;
>> +			i = urb->number_of_packets - 1;
>> +			while (0 <= i &&
>> +			       (urb->iso_frame_desc[i].status != 0 ||
>> +			        urb->iso_frame_desc[i].actual_length == 0)) {
>> +				i--;
>> +			}
>> +			if (0 <= i) {
>> +				length = urb->iso_frame_desc[i].offset +
>> +					 urb->iso_frame_desc[i].actual_length;
>> +			}
>> +		}
>>  		offset = mon_buff_area_alloc_contiguous(rp,
>>  						 length + PKT_SIZE + lendesc);
>>  	} else {
> 
> I am not entirely satisfied with the fix, for a couple of reasons.

I'm happy that you can point out things points which I haven't see for the first time.

quoted text
> First, it looks to me that the copy-out access with read(2) has exactly
> the same problem as access with mmap(2), so the patch should correct
> both cases.
> 
> Second, the recomputation of length is done after the anti-bursting
> check, thus bypassing it.
> 
> Finally, I'm not quite certain that using actual descriptors
> (urb->number_of_packets) is saner than returned descriptors
> (ep->ndesc). It's not like Wireshark can use those data bytes for
> anything useful without the corresponding descriptors, or does it?
> 
> Again, in Bugzilla:
> 
>> I could imagine different expected behaviours:
>>
>> (a) the transfered size equals to 800+800+800+800+800+170=4170 bytes, so the
>> iso desc 0...4 are fully transfered and the useful data from  isodesc 5 
>>
>> (b) the transfered size equals to 800+800+800+800+800+800=4800 bytes, so the
>> iso desc 0...5 are fully transfered
>>
>> (c) the transfered size equals to maximum possible size always, in this case
>> 24*800=19200 bytes
> 
> I see you went for (a). I leaned towards (c), just for simplicity.

The (c) solution would work also, it has the drawback that in that way
the kernel gives away the most uninitialized buffer content. Normally
it only contains remaining bytes from the previous URB data and not
leaking out any sensitive information.

quoted text
> On the other hand, we already loop over the descriptors in
> mon_bin_get_isodesc, so you're not adding an additional crash.
> 
> Let's do this: I'll rework your patch, and you review it to make
> sure it works, then sign it off if it checks out. Would that work?

Sure, I'm happy as long as I can capture the whole data content of the ISO
packets.

	Márton Németh
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/