On Fri 2010-09-17 03:12:40, ling.ma@intel.com wrote:
quoted text
> From: Ma Ling <ling.ma@intel.com>
> 
> movs instruction will combine data to accelerate moving data,
> however we need to concern two cases about it.
> 
> 1. movs instruction need long lantency to startup,
>    so here we use general mov instruction to copy data.
> 2. movs instruction is not good for unaligned case,
>    even if src offset is 0x10, dest offset is 0x0,
>    we avoid and handle the case by general mov instruction.

I guess this is true for current Intel cpus, but is it also true for
older Intels and AMDs?

Benchmarks?

quoted text
> Signed-off-by: Ma Ling <ling.ma@intel.com>
> ---
>  arch/x86/lib/memcpy_32.c  |  213 ++++++++++++++++++++++++++++++++++++------
>  arch/x86/lib/memmove_64.c |  225 ++++++++++++++++++++++++++++++++++++---------
>  2 files changed, 362 insertions(+), 76 deletions(-)
> 
> diff --git a/arch/x86/lib/memcpy_32.c b/arch/x86/lib/memcpy_32.c
> index 81130d4..b908a59 100644
> --- a/arch/x86/lib/memcpy_32.c
> +++ b/arch/x86/lib/memcpy_32.c
> @@ -22,36 +22,187 @@ EXPORT_SYMBOL(memset);
>  
>  void *memmove(void *dest, const void *src, size_t n)
>  {
> -	int d0, d1, d2;
> -
> -	if (dest < src) {
> -		if ((dest + n) < src)
> -			 return memcpy(dest, src, n);
> -		else
> -			__asm__ __volatile__(
> -				"rep\n\t"
> -				"movsb\n\t"
> -				: "=&c" (d0), "=&S" (d1), "=&D" (d2)
> -				:"0" (n),
> -				 "1" (src),
> -				 "2" (dest)
> -				:"memory");
> -	} else {
> -		if((src + n) < dest)
> -			return memcpy(dest, src, n);
> -		else
> -			__asm__ __volatile__(
> -				"std\n\t"
> -				"rep\n\t"
> -				"movsb\n\t"
> -				"cld"
> -				: "=&c" (d0), "=&S" (d1), "=&D" (d2)
> -				:"0" (n),
> -				 "1" (n-1+src),
> -				 "2" (n-1+dest)
> -				:"memory");
> -	}
> -
> -	return dest;
> +	int d0,d1,d2,d3,d4,d5;
> +	char *ret = dest;
> +
> +	__asm__ __volatile__(
> +		/* Handle more 16bytes in loop */
> +		"cmp __PLACEHOLDER__1_x10, %0\n\t"
> +		"jb	1f\n\t"
> +
> +		/* Decide forward/backward copy mode */
> +		"cmp %2, %1\n\t"
> +		"jb	2f\n\t"
> +
> +		/*
> +		 * movs instruction have many startup latency
> +		 * so we handle small size by general register.
> +		 */
> +		"cmp  0, %0\n\t"
> +		"jb 3f\n\t"
> +		/*
> +		 * movs instruction is only good for aligned case.
> +		 */
> +		"mov %1, %3\n\t"
> +		"xor %2, %3\n\t"
> +		"and __PLACEHOLDER__1_xff, %3\n\t"
> +		"jz 4f\n\t"
> +		"3:\n\t"
> +		"sub __PLACEHOLDER__1_x10, %0\n\t"
> +
> +		/*
> +		 * We gobble 16byts forward in each loop.
> +		 */
> +		"3:\n\t"
> +		"sub __PLACEHOLDER__1_x10, %0\n\t"
> +		"mov 0*4(%1), %3\n\t"
> +		"mov 1*4(%1), %4\n\t"
> +		"mov  %3, 0*4(%2)\n\t"
> +		"mov  %4, 1*4(%2)\n\t"
> +		"mov 2*4(%1), %3\n\t"
> +		"mov 3*4(%1), %4\n\t"
> +		"mov  %3, 2*4(%2)\n\t"
> +		"mov  %4, 3*4(%2)\n\t"
> +		"lea  0x10(%1), %1\n\t"
> +		"lea  0x10(%2), %2\n\t"
> +		"jae 3b\n\t"
> +		"add __PLACEHOLDER__1_x10, %0\n\t"
> +		"jmp 1f\n\t"
> +
> +		/*
> +		 * Handle data forward by movs.
> +		 */
> +		".p2align 4\n\t"
> +		"4:\n\t"
> +		"mov -4(%1, %0), %3\n\t"
> +		"lea -4(%2, %0), %4\n\t"
> +		"shr , %0\n\t"
> +		"rep movsl\n\t"
> +		"mov %3, (%4)\n\t"
> +		"jmp 11f\n\t"
> +		/*
> +		 * Handle data backward by movs.
> +		 */
> +		".p2align 4\n\t"
> +		"6:\n\t"
> +		"mov (%1), %3\n\t"
> +		"mov %2, %4\n\t"
> +		"lea -4(%1, %0), %1\n\t"
> +		"lea -4(%2, %0), %2\n\t"
> +		"shr , %0\n\t"
> +		"std\n\t"
> +		"rep movsl\n\t"
> +		"mov %3,(%4)\n\t"
> +		"cld\n\t"
> +		"jmp 11f\n\t"
> +
> +		/*
> +		 * Start to prepare for backward copy.
> +		 */
> +		".p2align 4\n\t"
> +		"2:\n\t"
> +		"cmp  0, %0\n\t"
> +		"jb 5f\n\t"
> +		"mov %1, %3\n\t"
> +		"xor %2, %3\n\t"
> +		"and __PLACEHOLDER__1_xff, %3\n\t"
> +		"jz 6b\n\t"
> +
> +		/*
> +		 * Calculate copy position to tail.
> +		 */
> +		"5:\n\t"
> +		"add %0, %1\n\t"
> +		"add %0, %2\n\t"
> +		"sub __PLACEHOLDER__1_x10, %0\n\t"
> +
> +		/*
> +		 * We gobble 16byts backward in each loop.
> +		 */
> +		"7:\n\t"
> +		"sub __PLACEHOLDER__1_x10, %0\n\t"
> +
> +		"mov -1*4(%1), %3\n\t"
> +		"mov -2*4(%1), %4\n\t"
> +		"mov  %3, -1*4(%2)\n\t"
> +		"mov  %4, -2*4(%2)\n\t"
> +		"mov -3*4(%1), %3\n\t"
> +		"mov -4*4(%1), %4\n\t"
> +		"mov  %3, -3*4(%2)\n\t"
> +		"mov  %4, -4*4(%2)\n\t"
> +		"lea  -0x10(%1), %1\n\t"
> +		"lea  -0x10(%2), %2\n\t"
> +		"jae 7b\n\t"
> +		/*
> +		 * Calculate copy position to head.
> +		 */
> +		"add __PLACEHOLDER__1_x10, %0\n\t"
> +		"sub %0, %1\n\t"
> +		"sub %0, %2\n\t"
> +
> +		/*
> +		 * Move data from 8 bytes to 15 bytes.
> +		 */
> +		".p2align 4\n\t"
> +		"1:\n\t"
> +		"cmp , %0\n\t"
> +		"jb 8f\n\t"
> +		"mov 0*4(%1), %3\n\t"
> +		"mov 1*4(%1), %4\n\t"
> +		"mov -2*4(%1, %0), %5\n\t"
> +		"mov -1*4(%1, %0), %1\n\t"
> +
> +		"mov  %3, 0*4(%2)\n\t"
> +		"mov  %4, 1*4(%2)\n\t"
> +		"mov  %5, -2*4(%2, %0)\n\t"
> +		"mov  %1, -1*4(%2, %0)\n\t"
> +		"jmp 11f\n\t"
> +
> +		/*
> +		 * Move data from 4 bytes to 7 bytes.
> +		 */
> +		".p2align 4\n\t"
> +		"8:\n\t"
> +		"cmp , %0\n\t"
> +		"jb 9f\n\t"
> +		"mov 0*4(%1), %3\n\t"
> +		"mov -1*4(%1, %0), %4\n\t"
> +		"mov  %3, 0*4(%2)\n\t"
> +		"mov  %4, -1*4(%2, %0)\n\t"
> +		"jmp 11f\n\t"
> +
> +		/*
> +		 * Move data from 2 bytes to 3 bytes.
> +		 */
> +		".p2align 4\n\t"
> +		"9:\n\t"
> +		"cmp , %0\n\t"
> +		"jb 10f\n\t"
> +		"movw 0*2(%1), %%dx\n\t"
> +		"movw -1*2(%1, %0), %%bx\n\t"
> +		"movw %%dx, 0*2(%2)\n\t"
> +		"movw %%bx, -1*2(%2, %0)\n\t"
> +		"jmp 11f\n\t"
> +
> +		/*
> +		 * Move data for 1 byte.
> +		 */
> +		".p2align 4\n\t"
> +		"10:\n\t"
> +		"cmp , %0\n\t"
> +		"jb 11f\n\t"
> +		"movb (%1), %%cl\n\t"
> +		"movb %%cl, (%2)\n\t"
> +		".p2align 4\n\t"
> +		"11:"
> +		: "=&c" (d0), "=&S" (d1), "=&D" (d2),
> +		  "=r" (d3),"=r" (d4), "=r"(d5)
> +		:"0" (n),
> +		 "1" (src),
> +		 "2" (dest)
> +		:"memory");
> +
> +	return ret;
> +
>  }
>  EXPORT_SYMBOL(memmove);
> diff --git a/arch/x86/lib/memmove_64.c b/arch/x86/lib/memmove_64.c
> index ecacc4b..6d0f0ec 100644
> --- a/arch/x86/lib/memmove_64.c
> +++ b/arch/x86/lib/memmove_64.c
> @@ -8,50 +8,185 @@
>  #undef memmove
>  void *memmove(void *dest, const void *src, size_t count)
>  {
> -	unsigned long d0, d1, d2, d3;
> -	if (dest < src) {
> -		if ((dest + count) < src)
> -			 return memcpy(dest, src, count);
> -		else
> -			__asm__ __volatile__(
> -				"movq %0, %3\n\t"
> -				"shr , %0\n\t"
> -				"andq , %3\n\t"
> -				"rep\n\t"
> -				"movsq\n\t"
> -				"movq %3, %0\n\t"
> -				"rep\n\t"
> -				"movsb"
> -				: "=&c" (d0), "=&S" (d1), "=&D" (d2), "=r" (d3)
> -				:"0" (count),
> -				 "1" (src),
> -				 "2" (dest)
> -				:"memory");
> -	} else {
> -		if((src + count) < dest)
> -			return memcpy(dest, src, count);
> -		else
> -			__asm__ __volatile__(
> -				"movq %0, %3\n\t"
> -				"lea -8(%1, %0), %1\n\t"
> -				"lea -8(%2, %0), %2\n\t"
> -				"shr , %0\n\t"
> -				"andq , %3\n\t"
> -				"std\n\t"
> -				"rep\n\t"
> -				"movsq\n\t"
> -				"lea 7(%1), %1\n\t"
> -				"lea 7(%2), %2\n\t"
> -				"movq %3, %0\n\t"
> -				"rep\n\t"
> -				"movsb\n\t"
> -				"cld"
> -				: "=&c" (d0), "=&S" (d1), "=&D" (d2), "=r" (d3)
> -				:"0" (count),
> -				 "1" (src),
> -				 "2" (dest)
> -				:"memory");
> -	}
> -	return dest;
> +	unsigned long d0,d1,d2,d3,d4,d5,d6,d7;
> +	char *ret;
> +
> +	__asm__ __volatile__(
> +		/* Handle more 32bytes in loop */
> +		"mov %2, %3\n\t"
> +		"cmp __PLACEHOLDER__1_x20, %0\n\t"
> +		"jb	1f\n\t"
> +
> +		/* Decide forward/backward copy mode */
> +		"cmp %2, %1\n\t"
> +		"jb	2f\n\t"
> +
> +		/*
> +		 * movsq instruction have many startup latency
> +		 * so we handle small size by general register.
> +		 */
> +		"cmp  0, %0\n\t"
> +		"jb 3f\n\t"
> +		/*
> +		 * movsq instruction is only good for aligned case.
> +		 */
> +		"cmpb %%dil, %%sil\n\t"
> +		"je 4f\n\t"
> +		"3:\n\t"
> +		"sub __PLACEHOLDER__1_x20, %0\n\t"
> +		/*
> +		 * We gobble 32byts forward in each loop.
> +		 */
> +		"5:\n\t"
> +		"sub __PLACEHOLDER__1_x20, %0\n\t"
> +		"movq 0*8(%1), %4\n\t"
> +		"movq 1*8(%1), %5\n\t"
> +		"movq 2*8(%1), %6\n\t"
> +		"movq 3*8(%1), %7\n\t"
> +		"leaq 4*8(%1), %1\n\t"
> +
> +		"movq %4, 0*8(%2)\n\t"
> +		"movq %5, 1*8(%2)\n\t"
> +		"movq %6, 2*8(%2)\n\t"
> +		"movq %7, 3*8(%2)\n\t"
> +		"leaq 4*8(%2), %2\n\t"
> +		"jae 5b\n\t"
> +		"addq __PLACEHOLDER__1_x20, %0\n\t"
> +		"jmp 1f\n\t"
> +		/*
> +		 * Handle data forward by movsq.
> +		 */
> +		".p2align 4\n\t"
> +		"4:\n\t"
> +		"movq %0, %8\n\t"
> +		"movq -8(%1, %0), %4\n\t"
> +		"lea -8(%2, %0), %5\n\t"
> +		"shrq , %8\n\t"
> +		"rep movsq\n\t"
> +		"movq %4, (%5)\n\t"
> +		"jmp 13f\n\t"
> +		/*
> +		 * Handle data backward by movsq.
> +		 */
> +		".p2align 4\n\t"
> +		"7:\n\t"
> +		"movq %0, %8\n\t"
> +		"movq (%1), %4\n\t"
> +		"movq %2, %5\n\t"
> +		"leaq -8(%1, %0), %1\n\t"
> +		"leaq -8(%2, %0), %2\n\t"
> +		"shrq , %8\n\t"
> +		"std\n\t"
> +		"rep movsq\n\t"
> +		"cld\n\t"
> +		"movq %4, (%5)\n\t"
> +		"jmp 13f\n\t"
> +
> +		/*
> +		 * Start to prepare for backward copy.
> +		 */
> +		".p2align 4\n\t"
> +		"2:\n\t"
> +		"cmp 0, %0\n\t"
> +		"jb 6f \n\t"
> +		"cmp %%dil, %%sil\n\t"
> +		"je 7b \n\t"
> +		"6:\n\t"
> +		/*
> +		 * Calculate copy position to tail.
> +		 */
> +		"addq %0, %1\n\t"
> +		"addq %0, %2\n\t"
> +		"subq __PLACEHOLDER__1_x20, %0\n\t"
> +		/*
> +		 * We gobble 32byts backward in each loop.
> +		 */
> +		"8:\n\t"
> +		"subq __PLACEHOLDER__1_x20, %0\n\t"
> +		"movq -1*8(%1), %4\n\t"
> +		"movq -2*8(%1), %5\n\t"
> +		"movq -3*8(%1), %6\n\t"
> +		"movq -4*8(%1), %7\n\t"
> +		"leaq -4*8(%1), %1\n\t"
> +
> +		"movq %4, -1*8(%2)\n\t"
> +		"movq %5, -2*8(%2)\n\t"
> +		"movq %6, -3*8(%2)\n\t"
> +		"movq %7, -4*8(%2)\n\t"
> +		"leaq -4*8(%2), %2\n\t"
> +		"jae 8b\n\t"
> +		/*
> +		 * Calculate copy position to head.
> +		 */
> +		"addq __PLACEHOLDER__1_x20, %0\n\t"
> +		"subq %0, %1\n\t"
> +		"subq %0, %2\n\t"
> +		"1:\n\t"
> +		"cmpq , %0\n\t"
> +		"jb 9f\n\t"
> +		/*
> +		 * Move data from 16 bytes to 31 bytes.
> +		 */
> +		"movq 0*8(%1), %4\n\t"
> +		"movq 1*8(%1), %5\n\t"
> +		"movq -2*8(%1, %0), %6\n\t"
> +		"movq -1*8(%1, %0), %7\n\t"
> +		"movq %4, 0*8(%2)\n\t"
> +		"movq %5, 1*8(%2)\n\t"
> +		"movq %6, -2*8(%2, %0)\n\t"
> +		"movq %7, -1*8(%2, %0)\n\t"
> +		"jmp 13f\n\t"
> +		".p2align 4\n\t"
> +		"9:\n\t"
> +		"cmpq , %0\n\t"
> +		"jb 10f\n\t"
> +		/*
> +		 * Move data from 8 bytes to 15 bytes.
> +		 */
> +		"movq 0*8(%1), %4\n\t"
> +		"movq -1*8(%1, %0), %5\n\t"
> +		"movq %4, 0*8(%2)\n\t"
> +		"movq %5, -1*8(%2, %0)\n\t"
> +		"jmp 13f\n\t"
> +		"10:\n\t"
> +		"cmpq , %0\n\t"
> +		"jb 11f\n\t"
> +		/*
> +		 * Move data from 4 bytes to 7 bytes.
> +		 */
> +		"movl (%1), %4d\n\t"
> +		"movl -4(%1, %0), %5d\n\t"
> +		"movl %4d, (%2)\n\t"
> +		"movl %5d, -4(%2, %0)\n\t"
> +		"jmp 13f\n\t"
> +		"11:\n\t"
> +		"cmp , %0\n\t"
> +		"jb 12f\n\t"
> +		/*
> +		 * Move data from 2 bytes to 3 bytes.
> +		 */
> +		"movw (%1), %4w\n\t"
> +		"movw -2(%1, %0), %5w\n\t"
> +		"movw %4w, (%2)\n\t"
> +		"movw %5w, -2(%2, %0)\n\t"
> +		"jmp 13f\n\t"
> +		"12:\n\t"
> +		"cmp , %0\n\t"
> +		"jb 13f\n\t"
> +		/*
> +		 * Move data for 1 byte.
> +		 */
> +		"movb (%1), %4b\n\t"
> +		"movb %4b, (%2)\n\t"
> +		"13:\n\t"
> +		: "=&d" (d0), "=&S" (d1), "=&D" (d2), "=&a" (ret) ,
> +		  "=r"(d3), "=r"(d4), "=r"(d5), "=r"(d6), "=&c" (d7)
> +		:"0" (count),
> +		 "1" (src),
> +		 "2" (dest)
> +		:"memory");
> +
> +		return ret;
> +
>  }
>  EXPORT_SYMBOL(memmove);

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/