* Carlos Chinea <carlos.chinea@nokia.com> [101011 01:58]:
quoted text
> Introduces the OMAP SSI driver in the kernel.
> 
> The Synchronous Serial Interface (SSI) is a legacy version
> of HSI. As in the case of HSI, it is mainly used to connect
> Application engines (APE) with cellular modem engines (CMT)
> in cellular handsets.
> 
> It provides a multichannel, full-duplex, multi-core communication
> with no reference clock. The OMAP SSI block is capable of reaching
> speeds of 110 Mbit/s.
> 
> Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>

quoted text
> --- /dev/null
> +++ b/arch/arm/mach-omap2/ssi.c

quoted text
> +static struct resource ssi_resources[] = {
> +	/* SSI controller */
> +	[0] = {
> +		.start	= 0x48058000,
> +		.end	= 0x48058fff,
> +		.name	= "omap_ssi_sys",
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	/* GDD */
> +	[1] = {
> +		.start	= 0x48059000,
> +		.end	= 0x48059fff,
> +		.name	= "omap_ssi_gdd",
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[2] = {
> +		.start	= 71,
> +		.end	= 71,
> +		.name	= "ssi_gdd",
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +	/* SSI port 1 */
> +	[3] = {
> +		.start	= 0x4805a000,
> +		.end	= 0x4805a7ff,
> +		.name	= "omap_ssi_sst1",
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[4] = {
> +		.start	= 0x4805a800,
> +		.end	= 0x4805afff,
> +		.name	= "omap_ssi_ssr1",
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[5] = {
> +		.start	= 67,
> +		.end	= 67,
> +		.name	= "ssi_p1_mpu_irq0",
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +	[6] = {
> +		.start	= 69,
> +		.end	= 69,
> +		.name	= "ssi_p1_mpu_irq1",
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +	[7] = {
> +		.start	= 0,
> +		.end	= 0,
> +		.name	= "ssi_p1_cawake",
> +		.flags	= IORESOURCE_IRQ | IORESOURCE_UNSET,
> +	},
> +};

Are these resources the same for omap2, 3 & 4?

quoted text
> +static void ssi_pdev_release(struct device *dev)
> +{
> +}

Not needed.

quoted text
> +static struct platform_device ssi_pdev = {
> +	.name		= "omap_ssi",
> +	.id		= 0,
> +	.num_resources	= ARRAY_SIZE(ssi_resources),
> +	.resource	= ssi_resources,
> +	.dev		= {
> +				.release	= ssi_pdev_release,
> +				.platform_data	= &ssi_pdata,
> +	},
> +};

Dummy release not needed here either.

quoted text
> +static int __init ssi_init(void)
> +{
> +	return platform_device_register(&ssi_pdev);
> +}
> +subsys_initcall(ssi_init);

This will probably cause trouble on omap2 and 4?

To me it seems that you should at least return early on the unsupported
platforms.

You might want to consider updating this for omap hwmod as it will
automate the platform_device and PM related issues to some extent.

Regards,

Tony
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/