login
Search
Please pull from 'davem-next' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git davem-next
to receive the following updates:
drivers/net/3c505.c | 4 +-
drivers/net/Kconfig | 14 +-
drivers/net/arcnet/arcnet.c | 18 +-
drivers/net/arcnet/com20020.c | 16 +-
drivers/net/ax88796.c | 14 +-
drivers/net/bfin_mac.c | 8 +-
drivers/net/bonding/bond_main.c | 6 +
drivers/net/bonding/bonding.h | 2 +-
drivers/net/cxgb3/cxgb3_offload.c | 8 +-
drivers/net/cxgb3/sge.c | 35 -
drivers/net/e100.c | 2 +-
drivers/net/ehea/ehea.h | 4 +-
drivers/net/ehea/ehea_main.c | 26 +-
drivers/net/enc28j60.c | 56 +-
drivers/net/ibm_newemac/phy.c | 2 +-
drivers/net/ixgb/ixgb.h | 2 +-
drivers/net/ixgbe/ixgbe.h | 72 +-
drivers/net/ixgbe/ixgbe_82598.c | 628 +++++++++++++---
drivers/net/ixgbe/ixgbe_common.c | 972 ++++++++++++++++---------
drivers/net/ixgbe/ixgbe_common.h | 62 +-
drivers/net/ixgbe/ixgbe_ethtool.c | 303 ++++----
drivers/net/ixgbe/ixgbe_main.c | 1318 +++++++++++++++++++---------------
drivers/net/ixgbe/ixgbe_phy.c | 244 +++----
drivers/net/ixgbe/ixgbe_phy.h | 63 ++-
drivers/net/ixgbe/ixgbe_type.h | 528 +++++++++-----
drivers/net/meth.c | 2 +-
drivers/net/mipsnet.c | 2 +-
drivers/net/myri10ge/myri10ge.c | 381 +++++++++--
drivers/net/netx-eth.c | 2 +-
drivers/net/netxen/netxen_nic.h | 2 +-
drivers/net/netxen/netxen_nic_main.c | 20 +-
drivers/net/pci-skeleton.c | 4 +-
drivers/net/r6040.c | 4 +-
drivers/net/r8169.c | 2 +-
drivers/net/s2io.c | 40 +-
drivers/net/sfc/efx.c | 18 +-
drivers/net/sfc/falcon.c | 260 ++++----
drivers/net/sfc/falcon.h | 1 +
drivers/net/sfc/falcon_hwdefs.h | 1 -
drivers/net/sfc/falcon_io.h | 1 -
drivers/net/sfc/falcon_xmac.c | 88 +---
drivers/net/sfc/net_driver.h | 8 +-
drivers/net/sfc/sfe4001.c | 12 -
drivers/net/sfc/tenxpress.c | 69 +--
drivers/net/sfc/tx.c | 2 +-
drivers/net/sfc/workarounds.h | 2 -
drivers/net/sfc/xfp_phy.c | 1 -
drivers/net/smc911x.c | 68 +-
drivers/net/smc91x.c | 40 +-
drivers/net/sundance.c | 95 ++-
drivers/net/tehuti.h | 8 +-
drivers/net/tsi108_eth.c | 6 +-
drivers/net/ucc_geth.c | 116 ++--
drivers/net/usb/hso.c | 326 ++++++---
drivers/net/usb/mcs7830.c | 2 +-
drivers/net/usb/pegasus.c | 20 +-
drivers/net/via-velocity.h | 2 +-
drivers/net/wan/cycx_drv.c | 6 +-
drivers/net/wan/cycx_x25.c | 12 +-
drivers/net/wan/dscc4.c | 2 +-
drivers/net/wan/pc300_tty.c | 2 +-
include/linux/pci_ids.h | 10 +
62 files changed, 3684 insertions(+), 2360 deletions(-)
Alexander Duyck (3):
ixgbe: correctly add and remove napi queues
ixgbe: whitespace/formatting cleanup
ixgbe: make compilation with LRO optional
Ben Hutchings (11):
sfc: Add check for memory allocation failure in falcon_probe_nic()
sfc: Fix memory BAR release call on error path
sfc: Remove workaround for old firmware bug
sfc: Serialise tenxpress_special_reset() with statistics fetches
sfc: Make queue flushes more reliable
sfc: Stop generating bogus events in tenxpress_check_hw()
sfc: Insert read memory barrier after checking MAC statistics flag
sfc: Disable interrupts after a fatal interrupt occurs until reset
sfc: Remove obsolete comment about PCI modes
sfc: Use CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS where appropriate
sfc: Fix type of FALCON_SPI_MAX_LEN
Brice Goglin (5):
myri10ge: Stop scaring people when DCA is built but absent
myri10ge: Rename DCA-related firmware counters
myri10ge: Add Toeplitz-hashing related routines
myri10ge: Add multiqueue TX support
myri10ge: use DCA if DCA is compiled as a module
Dan Nicholson (1):
sundance: set carrier status on link change events
Denis Joseph Barrow (1):
[netdrvr] usb/hso: throttle to prevent loss of serial data
Dhananjay Phadke (2):
netxen: add pci ids
netxen: enable msi-x for quad-gig boards
Divy Le Ray (1):
cxgb3 - remove duplicate tests in lro
Florian Fainelli (1):
r6040: fix bad usage of udelay
Francois Romieu (1):
r8169: select MII in Kconfig
Hannes Hering (1):
ehea: Enable DLPAR memory remove
Harvey Harrison (1):
drivers/net: replace __FUNCTION__ with __func__
Jeff Kirsher (2):
ixgbe: fix pci_resource allocation as in other drivers
ixgbe: bump version
Jesse Brandeburg (23):
ixgbe: fix bug where using wake queue instead of start
ixgbe: fix dca defines to not have spaces
ixgbe: fix multicast address update
ixgbe: Update watchdog thread to accomodate longerlink_up events
ixgbe: link change interrupt was not causing link event
ixgbe: fix bug with shared interrupts
ixgbe: limit small mtu to minimum for ipv4 support
ixgbe: fix ethtool register dump
ixgbe: fix ethtool disable csum for ipv6
ixgbe: fix initial interrupt throttle settings
ixgbe: fix bug with lots of tx queues
ixgbe: recycle pages in packet split mode
ixgbe: add device support for XF LR adapters
ixgbe: fix ring reallocation in ethtool
ixgbe: lro stats were not counted on first ethtool -Scall
ixgbe: add clean rx many routine
ixgbe: update to latest common code module
ixgbe: refresh the ixgbe_down function
ixgbe: move set_num_queues and call it after msix failure
ixgbe: cleanup defines
ixgbe: lower stack space usage
ixgbe: xmit frame refactor
ixgbe: fix DCA dependency in Kconfig
Magnus Damm (1):
smc911x: remove duplicate debug printout
Peter P Waskiewicz (1):
ixgbe: Whitespace, copyright update and version number change patch
Sebastien Dugue (1):
ehea: fix mutex and spinlock use
Stephen Hemminger (1):
bonding: add more ethtool support
Steve Hodgson (2):
sfc: Don't use EFX_OWORD_FIELD on an event (64-bit, quad-word)
sfc: Don't include net_driver.h from falcon_io.h
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index fdfb2b2..a424869 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -130,12 +130,12 @@ static const char filename[] = __FILE__;
static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n";
#define TIMEOUT_MSG(lineno) \
- printk(timeout_msg, filename,__FUNCTION__,(lineno))
+ printk(timeout_msg, filename,__func__,(lineno))
static const char invalid_pcb_msg[] =
"*** invalid pcb length %d at %s:%s (line %d) ***\n";
#define INVALID_PCB_MSG(len) \
- printk(invalid_pcb_msg, (len),filename,__FUNCTION__,__LINE__)
+ printk(invalid_pcb_msg, (len),filename,__func__,__LINE__)
static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x...";
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4a11296..91bcaa1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2046,6 +2046,7 @@ config R8169
tristate "Realtek 8169 gigabit ethernet support"
depends on PCI
select CRC32
+ select MII
---help---
Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
@@ -2380,7 +2381,7 @@ config EHEA
config IXGBE
tristate "Intel(R) 10GbE PCI Express adapters support"
depends on PCI && INET
- select INET_LRO
+ select INTEL_IOATDMA
---help---
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
@@ -2396,6 +2397,16 @@ config IXGBE
To compile this driver as a module, choose M here. The module
will be called ixgbe.
+config IXGBE_LRO
+ bool "Use software LRO"
+ depends on IXGBE && INET
+ select INET_LRO
+ default y
+ ---help---
+ Say Y here if you want to use large receive offload.
+
+ If in doubt, say N.
+
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
@@ -2432,6 +2443,7 @@ config MYRI10GE
select FW_LOADER
select CRC32
select INET_LRO
+ select INTEL_IOATDMA
---help---
This driver supports Myricom Myri-10G Dual Protocol interface in
Ethernet mode. If the eeprom on your board is not recent enough,
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index bdc4c0b..a5b0769 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -442,24 +442,24 @@ static int arcnet_open(struct net_device *dev)
BUGMSG(D_NORMAL, "WARNING! Station address FF may confuse "
"DOS networking programs!\n");
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
if (ASTATUS() & RESETflag) {
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
ACOMMAND(CFLAGScmd | RESETclear);
}
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
/* make sure we're ready to receive IRQ's. */
AINTMASK(0);
udelay(1); /* give it time to set the mask before
* we reset it again. (may not even be
* necessary)
*/
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
lp->intmask = NORXflag | RECONflag;
AINTMASK(lp->intmask);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
netif_start_queue(dev);
@@ -670,14 +670,14 @@ static int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev)
freeskb = 0;
}
- BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__FUNCTION__,ASTATUS());
+ BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
/* make sure we didn't ignore a TX IRQ while we were in here */
AINTMASK(0);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
lp->intmask |= TXFREEflag|EXCNAKflag;
AINTMASK(lp->intmask);
- BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__FUNCTION__,ASTATUS());
+ BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
spin_unlock_irqrestore(&lp->lock, flags);
if (freeskb) {
@@ -798,7 +798,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
diagstatus = (status >> 8) & 0xFF;
BUGMSG(D_DEBUG, "%s: %d: %s: status=%x\n",
- __FILE__,__LINE__,__FUNCTION__,status);
+ __FILE__,__LINE__,__func__,status);
didsomething = 0;
/*
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 8b51313..70124a9 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -238,15 +238,15 @@ static int com20020_reset(struct net_device *dev, int really_reset)
u_char inbyte;
BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
- __FILE__,__LINE__,__FUNCTION__,dev,lp,dev->name);
+ __FILE__,__LINE__,__func__,dev,lp,dev->name);
BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
dev->name, ASTATUS());
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
/* power-up defaults */
SETCONF;
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
if (really_reset) {
/* reset the card */
@@ -254,22 +254,22 @@ static int com20020_reset(struct net_device *dev, int really_reset)
mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */
}
/* clear flags & end reset */
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
/* verify that the ARCnet signature byte is present */
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
if (inbyte != TESTvalue) {
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
return 1;
}
/* enable extended (512-byte) packets */
ACOMMAND(CONFIGcmd | EXTconf);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
/* done! return success. */
return 0;
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index a886a4b..4207d6e 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -153,7 +153,7 @@ static void ax_reset_8390(struct net_device *dev)
while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) {
if (jiffies - reset_start_time > 2*HZ/100) {
dev_warn(&ax->dev->dev, "%s: %s did not complete.\n",
- __FUNCTION__, dev->name);
+ __func__, dev->name);
break;
}
}
@@ -173,7 +173,7 @@ static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
if (ei_status.dmaing) {
dev_err(&ax->dev->dev, "%s: DMAing conflict in %s "
"[DMAstat:%d][irqlock:%d].\n",
- dev->name, __FUNCTION__,
+ dev->name, __func__,
ei_status.dmaing, ei_status.irqlock);
return;
}
@@ -215,7 +215,7 @@ static void ax_block_input(struct net_device *dev, int count,
dev_err(&ax->dev->dev,
"%s: DMAing conflict in %s "
"[DMAstat:%d][irqlock:%d].\n",
- dev->name, __FUNCTION__,
+ dev->name, __func__,
ei_status.dmaing, ei_status.irqlock);
return;
}
@@ -260,7 +260,7 @@ static void ax_block_output(struct net_device *dev, int count,
if (ei_status.dmaing) {
dev_err(&ax->dev->dev, "%s: DMAing conflict in %s."
"[DMAstat:%d][irqlock:%d]\n",
- dev->name, __FUNCTION__,
+ dev->name, __func__,
ei_status.dmaing, ei_status.irqlock);
return;
}
@@ -396,7 +396,7 @@ ax_phy_issueaddr(struct net_device *dev, int phy_addr, int reg, int opc)
{
if (phy_debug)
pr_debug("%s: dev %p, %04x, %04x, %d\n",
- __FUNCTION__, dev, phy_addr, reg, opc);
+ __func__, dev, phy_addr, reg, opc);
ax_mii_ei_outbits(dev, 0x3f, 6); /* pre-amble */
ax_mii_ei_outbits(dev, 1, 2); /* frame-start */
@@ -422,7 +422,7 @@ ax_phy_read(struct net_device *dev, int phy_addr, int reg)
spin_unlock_irqrestore(&ei_local->page_lock, flags);
if (phy_debug)
- pr_debug("%s: %04x.%04x => read %04x\n", __FUNCTION__,
+ pr_debug("%s: %04x.%04x => read %04x\n", __func__,
phy_addr, reg, result);
return result;
@@ -436,7 +436,7 @@ ax_phy_write(struct net_device *dev, int phy_addr, int reg, int value)
unsigned long flags;
dev_dbg(&ax->dev->dev, "%s: %p, %04x, %04x %04x\n",
- __FUNCTION__, dev, phy_addr, reg, value);
+ __func__, dev, phy_addr, reg, value);
spin_lock_irqsave(&ei->page_lock, flags);
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 3db7db1..df896e2 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -811,7 +811,7 @@ static void bfin_mac_enable(void)
{
u32 opmode;
- pr_debug("%s: %s\n", DRV_NAME, __FUNCTION__);
+ pr_debug("%s: %s\n", DRV_NAME, __func__);
/* Set RX DMA */
bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
@@ -847,7 +847,7 @@ static void bfin_mac_enable(void)
/* Our watchdog timed out. Called by the networking layer */
static void bfin_mac_timeout(struct net_device *dev)
{
- pr_debug("%s: %s\n", dev->name, __FUNCTION__);
+ pr_debug("%s: %s\n", dev->name, __func__);
bfin_mac_disable();
@@ -949,7 +949,7 @@ static int bfin_mac_open(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
int retval;
- pr_debug("%s: %s\n", dev->name, __FUNCTION__);
+ pr_debug("%s: %s\n", dev->name, __func__);
/*
* Check that the address is valid. If its not, refuse
@@ -989,7 +989,7 @@ static int bfin_mac_open(struct net_device *dev)
static int bfin_mac_close(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
- pr_debug("%s: %s\n", dev->name, __FUNCTION__);
+ pr_debug("%s: %s\n", dev->name, __func__);
netif_stop_queue(dev);
netif_carrier_off(dev);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index babe461..8e2be24 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4493,6 +4493,12 @@ static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
static const struct ethtool_ops bond_ethtool_ops = {
.get_drvinfo = bond_ethtool_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .get_tso = ethtool_op_get_tso,
+ .get_ufo = ethtool_op_get_ufo,
+ .get_flags = ethtool_op_get_flags,
};
/*
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index fb730ec..f7b40ed 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -32,7 +32,7 @@
#ifdef BONDING_DEBUG
#define dprintk(fmt, args...) \
printk(KERN_DEBUG \
- DRV_NAME ": %s() %d: " fmt, __FUNCTION__, __LINE__ , ## args )
+ DRV_NAME ": %s() %d: " fmt, __func__, __LINE__ , ## args )
#else
#define dprintk(fmt, args...)
#endif /* BONDING_DEBUG */
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index c5b3de1..0f6fd63 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -1018,7 +1018,7 @@ static void set_l2t_ix(struct t3cdev *tdev, u32 tid, struct l2t_entry *e)
skb = alloc_skb(sizeof(*req), GFP_ATOMIC);
if (!skb) {
- printk(KERN_ERR "%s: cannot allocate skb!\n", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate skb!\n", __func__);
return;
}
skb->priority = CPL_PRIORITY_CONTROL;
@@ -1049,14 +1049,14 @@ void cxgb_redirect(struct dst_entry *old, struct dst_entry *new)
return;
if (!is_offloading(newdev)) {
printk(KERN_WARNING "%s: Redirect to non-offload "
- "device ignored.\n", __FUNCTION__);
+ "device ignored.\n", __func__);
return;
}
tdev = dev2t3cdev(olddev);
BUG_ON(!tdev);
if (tdev != dev2t3cdev(newdev)) {
printk(KERN_WARNING "%s: Redirect to different "
- "offload device ignored.\n", __FUNCTION__);
+ "offload device ignored.\n", __func__);
return;
}
@@ -1064,7 +1064,7 @@ void cxgb_redirect(struct dst_entry *old, struct dst_entry *new)
e = t3_l2t_get(tdev, new->neighbour, newdev);
if (!e) {
printk(KERN_ERR "%s: couldn't allocate new l2t entry!\n",
- __FUNCTION__);
+ __func__);
return;
}
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 1b0861d..f78a42c 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1937,38 +1937,6 @@ static inline int lro_frame_ok(const struct cpl_rx_pkt *p)
eh->h_proto == htons(ETH_P_IP) && ih->ihl == (sizeof(*ih) >> 2);
}
-#define TCP_FLAG_MASK (TCP_FLAG_CWR | TCP_FLAG_ECE | TCP_FLAG_URG |\
- TCP_FLAG_ACK | TCP_FLAG_PSH | TCP_FLAG_RST |\
- TCP_FLAG_SYN | TCP_FLAG_FIN)
-#define TSTAMP_WORD ((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |\
- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)
-
-/**
- * lro_segment_ok - check if a TCP segment is eligible for LRO
- * @tcph: the TCP header of the packet
- *
- * Returns true if a TCP packet is eligible for LRO. This requires that
- * the packet have only the ACK flag set and no TCP options besides
- * time stamps.
- */
-static inline int lro_segment_ok(const struct tcphdr *tcph)
-{
- int optlen;
-
- if (unlikely((tcp_flag_word(tcph) & TCP_FLAG_MASK) != TCP_FLAG_ACK))
- return 0;
-
- optlen = (tcph->doff << 2) - sizeof(*tcph);
- if (optlen) {
- const u32 *opt = (const u32 *)(tcph + 1);
-
- if (optlen != TCPOLEN_TSTAMP_ALIGNED ||
- *opt != htonl(TSTAMP_WORD) || !opt[2])
- return 0;
- }
- return 1;
-}
-
static int t3_get_lro_header(void **eh, void **iph, void **tcph,
u64 *hdr_flags, void *priv)
{
@@ -1981,9 +1949,6 @@ static int t3_get_lro_header(void **eh, void **iph, void **tcph,
*iph = (struct iphdr *)((struct ethhdr *)*eh + 1);
*tcph = (struct tcphdr *)((struct iphdr *)*iph + 1);
- if (!lro_segment_ok(*tcph))
- return -1;
-
*hdr_flags = LRO_IPV4 | LRO_TCP;
return 0;
}
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 453115a..7d7dfa5 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -191,7 +191,7 @@ MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
#define DPRINTK(nlevel, klevel, fmt, args...) \
(void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
- __FUNCTION__ , ## args))
+ __func__ , ## args))
#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index e01926b..5524271 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,13 +40,13 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0092"
+#define DRV_VERSION "EHEA_0093"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
#define DLPAR_MEM_ADD 2
#define DLPAR_MEM_REM 4
-#define EHEA_CAPABILITIES (DLPAR_PORT_ADD_REM | DLPAR_MEM_ADD)
+#define EHEA_CAPABILITIES (DLPAR_PORT_ADD_REM | DLPAR_MEM_ADD | DLPAR_MEM_REM)
#define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \
| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index b70c531..c765ec6 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -219,9 +219,11 @@ static void ehea_update_firmware_handles(void)
}
out_update:
+ mutex_lock(&ehea_fw_handles.lock);
kfree(ehea_fw_handles.arr);
ehea_fw_handles.arr = arr;
ehea_fw_handles.num_entries = i;
+ mutex_unlock(&ehea_fw_handles.lock);
}
static void ehea_update_bcmc_registrations(void)
@@ -293,9 +295,11 @@ static void ehea_update_bcmc_registrations(void)
}
out_update:
+ spin_lock(&ehea_bcmc_regs.lock);
kfree(ehea_bcmc_regs.arr);
ehea_bcmc_regs.arr = arr;
ehea_bcmc_regs.num_entries = i;
+ spin_unlock(&ehea_bcmc_regs.lock);
}
static struct net_device_stats *ehea_get_stats(struct net_device *dev)
@@ -1770,8 +1774,6 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
- spin_lock(&ehea_bcmc_regs.lock);
-
/* Deregister old MAC in pHYP */
if (port->state == EHEA_PORT_UP) {
ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
@@ -1792,7 +1794,6 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
out_upregs:
ehea_update_bcmc_registrations();
- spin_unlock(&ehea_bcmc_regs.lock);
out_free:
kfree(cb0);
out:
@@ -1954,8 +1955,6 @@ static void ehea_set_multicast_list(struct net_device *dev)
}
ehea_promiscuous(dev, 0);
- spin_lock(&ehea_bcmc_regs.lock);
-
if (dev->flags & IFF_ALLMULTI) {
ehea_allmulti(dev, 1);
goto out;
@@ -1985,7 +1984,6 @@ static void ehea_set_multicast_list(struct net_device *dev)
}
out:
ehea_update_bcmc_registrations();
- spin_unlock(&ehea_bcmc_regs.lock);
return;
}
@@ -2466,8 +2464,6 @@ static int ehea_up(struct net_device *dev)
if (port->state == EHEA_PORT_UP)
return 0;
- mutex_lock(&ehea_fw_handles.lock);
-
ret = ehea_port_res_setup(port, port->num_def_qps,
port->num_add_tx_qps);
if (ret) {
@@ -2504,8 +2500,6 @@ static int ehea_up(struct net_device *dev)
}
}
- spin_lock(&ehea_bcmc_regs.lock);
-
ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
if (ret) {
ret = -EIO;
@@ -2527,10 +2521,8 @@ out:
ehea_info("Failed starting %s. ret=%i", dev->name, ret);
ehea_update_bcmc_registrations();
- spin_unlock(&ehea_bcmc_regs.lock);
ehea_update_firmware_handles();
- mutex_unlock(&ehea_fw_handles.lock);
return ret;
}
@@ -2580,9 +2572,6 @@ static int ehea_down(struct net_device *dev)
if (port->state == EHEA_PORT_DOWN)
return 0;
- mutex_lock(&ehea_fw_handles.lock);
-
- spin_lock(&ehea_bcmc_regs.lock);
ehea_drop_multicast_list(dev);
ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
@@ -2591,7 +2580,6 @@ static int ehea_down(struct net_device *dev)
port->state = EHEA_PORT_DOWN;
ehea_update_bcmc_registrations();
- spin_unlock(&ehea_bcmc_regs.lock);
ret = ehea_clean_all_portres(port);
if (ret)
@@ -2599,7 +2587,6 @@ static int ehea_down(struct net_device *dev)
dev->name, ret);
ehea_update_firmware_handles();
- mutex_unlock(&ehea_fw_handles.lock);
return ret;
}
@@ -3378,7 +3365,6 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
ehea_error("Invalid ibmebus device probed");
return -EINVAL;
}
- mutex_lock(&ehea_fw_handles.lock);
adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
if (!adapter) {
@@ -3462,7 +3448,6 @@ out_free_ad:
out:
ehea_update_firmware_handles();
- mutex_unlock(&ehea_fw_handles.lock);
return ret;
}
@@ -3481,8 +3466,6 @@ static int __devexit ehea_remove(struct of_device *dev)
flush_scheduled_work();
- mutex_lock(&ehea_fw_handles.lock);
-
ibmebus_free_irq(adapter->neq->attr.ist1, adapter);
tasklet_kill(&adapter->neq_tasklet);
@@ -3492,7 +3475,6 @@ static int __devexit ehea_remove(struct of_device *dev)
kfree(adapter);
ehea_update_firmware_handles();
- mutex_unlock(&ehea_fw_handles.lock);
return 0;
}
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index aa0bf6e..e1b441e 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -110,7 +110,7 @@ spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
}
if (ret && netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return ret;
}
@@ -131,7 +131,7 @@ static int spi_write_buf(struct enc28j60_net *priv, int len,
ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
if (ret && netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
}
return ret;
}
@@ -156,7 +156,7 @@ static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
if (ret)
printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
else
val = rx_buf[slen - 1];
@@ -176,14 +176,14 @@ static int spi_write_op(struct enc28j60_net *priv, u8 op,
ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
if (ret && netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return ret;
}
static void enc28j60_soft_reset(struct enc28j60_net *priv)
{
if (netif_msg_hw(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
/* Errata workaround #1, CLKRDY check is unreliable,
@@ -357,7 +357,7 @@ static void enc28j60_mem_read(struct enc28j60_net *priv,
reg = nolock_regw_read(priv, ERDPTL);
if (reg != addr)
printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
- "(0x%04x - 0x%04x)\n", __FUNCTION__, reg, addr);
+ "(0x%04x - 0x%04x)\n", __func__, reg, addr);
}
#endif
spi_read_buf(priv, len, data);
@@ -380,7 +380,7 @@ enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
if (reg != TXSTART_INIT)
printk(KERN_DEBUG DRV_NAME
": %s() ERWPT:0x%04x != 0x%04x\n",
- __FUNCTION__, reg, TXSTART_INIT);
+ __func__, reg, TXSTART_INIT);
}
#endif
/* Set the TXND pointer to correspond to the packet size given */
@@ -390,13 +390,13 @@ enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME
": %s() after control byte ERWPT:0x%04x\n",
- __FUNCTION__, nolock_regw_read(priv, EWRPTL));
+ __func__, nolock_regw_read(priv, EWRPTL));
/* copy the packet into the transmit buffer */
spi_write_buf(priv, len, data);
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME
": %s() after write packet ERWPT:0x%04x, len=%d\n",
- __FUNCTION__, nolock_regw_read(priv, EWRPTL), len);
+ __func__, nolock_regw_read(priv, EWRPTL), len);
mutex_unlock(&priv->lock);
}
@@ -495,7 +495,7 @@ static int enc28j60_set_hw_macaddr(struct net_device *ndev)
if (netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME
": %s() Hardware must be disabled to set "
- "Mac address\n", __FUNCTION__);
+ "Mac address\n", __func__);
ret = -EBUSY;
}
mutex_unlock(&priv->lock);
@@ -575,7 +575,7 @@ static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
if (start > 0x1FFF || end > 0x1FFF || start > end) {
if (netif_msg_drv(priv))
printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
- "bad parameters!\n", __FUNCTION__, start, end);
+ "bad parameters!\n", __func__, start, end);
return;
}
/* set receive buffer start + end */
@@ -591,7 +591,7 @@ static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
if (start > 0x1FFF || end > 0x1FFF || start > end) {
if (netif_msg_drv(priv))
printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
- "bad parameters!\n", __FUNCTION__, start, end);
+ "bad parameters!\n", __func__, start, end);
return;
}
/* set transmit buffer start + end */
@@ -630,7 +630,7 @@ static int enc28j60_hw_init(struct enc28j60_net *priv)
u8 reg;
if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __FUNCTION__,
+ printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
priv->full_duplex ? "FullDuplex" : "HalfDuplex");
mutex_lock(&priv->lock);
@@ -661,7 +661,7 @@ static int enc28j60_hw_init(struct enc28j60_net *priv)
if (reg == 0x00 || reg == 0xff) {
if (netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
- __FUNCTION__, reg);
+ __func__, reg);
return 0;
}
@@ -724,7 +724,7 @@ static void enc28j60_hw_enable(struct enc28j60_net *priv)
/* enable interrupts */
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
- __FUNCTION__);
+ __func__);
enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
@@ -888,7 +888,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
if (netif_msg_rx_err(priv))
dev_err(&ndev->dev,
"%s() Invalid packet address!! 0x%04x\n",
- __FUNCTION__, priv->next_pk_ptr);
+ __func__, priv->next_pk_ptr);
/* packet address corrupted: reset RX logic */
mutex_lock(&priv->lock);
nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
@@ -917,7 +917,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
rxstat |= rsv[4];
if (netif_msg_rx_status(priv))
- enc28j60_dump_rsv(priv, __FUNCTION__, next_packet, len, rxstat);
+ enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
if (!RSV_GETBIT(rxstat, RSV_RXOK)) {
if (netif_msg_rx_err(priv))
@@ -941,7 +941,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
len, skb_put(skb, len));
if (netif_msg_pktdata(priv))
- dump_packet(__FUNCTION__, skb->len, skb->data);
+ dump_packet(__func__, skb->len, skb->data);
skb->protocol = eth_type_trans(skb, ndev);
/* update statistics */
ndev->stats.rx_packets++;
@@ -958,7 +958,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
- __FUNCTION__, erxrdpt);
+ __func__, erxrdpt);
mutex_lock(&priv->lock);
nolock_regw_write(priv, ERXRDPTL, erxrdpt);
@@ -968,7 +968,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
reg = nolock_regw_read(priv, ERXRDPTL);
if (reg != erxrdpt)
printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
- "error (0x%04x - 0x%04x)\n", __FUNCTION__,
+ "error (0x%04x - 0x%04x)\n", __func__,
reg, erxrdpt);
}
#endif
@@ -1006,7 +1006,7 @@ static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
mutex_unlock(&priv->lock);
if (netif_msg_rx_status(priv))
printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
- __FUNCTION__, free_space);
+ __func__, free_space);
return free_space;
}
@@ -1022,7 +1022,7 @@ static void enc28j60_check_link_status(struct net_device *ndev)
reg = enc28j60_phy_read(priv, PHSTAT2);
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
- "PHSTAT2: %04x\n", __FUNCTION__,
+ "PHSTAT2: %04x\n", __func__,
enc28j60_phy_read(priv, PHSTAT1), reg);
duplex = reg & PHSTAT2_DPXSTAT;
@@ -1095,7 +1095,7 @@ static void enc28j60_irq_work_handler(struct work_struct *work)
int intflags, loop;
if (netif_msg_intr(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
/* disable further interrupts */
locked_reg_bfclr(priv, EIE, EIE_INTIE);
@@ -1198,7 +1198,7 @@ static void enc28j60_irq_work_handler(struct work_struct *work)
/* re-enable interrupts */
locked_reg_bfset(priv, EIE, EIE_INTIE);
if (netif_msg_intr(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
}
/*
@@ -1213,7 +1213,7 @@ static void enc28j60_hw_tx(struct enc28j60_net *priv)
": Tx Packet Len:%d\n", priv->tx_skb->len);
if (netif_msg_pktdata(priv))
- dump_packet(__FUNCTION__,
+ dump_packet(__func__,
priv->tx_skb->len, priv->tx_skb->data);
enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
@@ -1254,7 +1254,7 @@ static int enc28j60_send_packet(struct sk_buff *skb, struct net_device *dev)
struct enc28j60_net *priv = netdev_priv(dev);
if (netif_msg_tx_queued(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
/* If some error occurs while trying to transmit this
* packet, you should return '1' from this function.
@@ -1325,7 +1325,7 @@ static int enc28j60_net_open(struct net_device *dev)
struct enc28j60_net *priv = netdev_priv(dev);
if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
if (!is_valid_ether_addr(dev->dev_addr)) {
if (netif_msg_ifup(priv)) {
@@ -1363,7 +1363,7 @@ static int enc28j60_net_close(struct net_device *dev)
struct enc28j60_net *priv = netdev_priv(dev);
if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
enc28j60_hw_disable(priv);
enc28j60_lowpower(priv, true);
diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c
index 37bfeea..9164abb 100644
--- a/drivers/net/ibm_newemac/phy.c
+++ b/drivers/net/ibm_newemac/phy.c
@@ -321,7 +321,7 @@ static struct mii_phy_def bcm5248_phy_def = {
static int m88e1111_init(struct mii_phy *phy)
{
- pr_debug("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__);
+ pr_debug("%s: Marvell 88E1111 Ethernet\n", __func__);
phy_write(phy, 0x14, 0x0ce3);
phy_write(phy, 0x18, 0x4101);
phy_write(phy, 0x09, 0x0e00);
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 804698f..d85717e 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -85,7 +85,7 @@ struct ixgb_adapter;
#define DPRINTK(nlevel, klevel, fmt, args...) \
(void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
- __FUNCTION__ , ## args))
+ __func__ , ## args))
/* TX/RX descriptor defines */
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 90b5383..b25022f 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -20,7 +20,6 @@
the file called "COPYING".
Contact Information:
- Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
@@ -32,7 +31,12 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
+
+#ifdef CONFIG_IXGBE_LRO
#include <linux/inet_lro.h>
+#define IXGBE_MAX_LRO_AGGREGATE 32
+#define IXGBE_MAX_LRO_DESCRIPTORS 8
+#endif
#include "ixgbe_type.h"
#include "ixgbe_common.h"
@@ -41,13 +45,11 @@
#include <linux/dca.h>
#endif
-#define IXGBE_ERR(args...) printk(KERN_ERR "ixgbe: " args)
-
#define PFX "ixgbe: "
#define DPRINTK(nlevel, klevel, fmt, args...) \
((void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
- __FUNCTION__ , ## args)))
+ __func__ , ## args)))
/* TX/RX descriptor defines */
#define IXGBE_DEFAULT_TXD 1024
@@ -58,15 +60,6 @@
#define IXGBE_MAX_RXD 4096
#define IXGBE_MIN_RXD 64
-#define IXGBE_DEFAULT_RXQ 1
-#define IXGBE_MAX_RXQ 1
-#define IXGBE_MIN_RXQ 1
-
-#define IXGBE_DEFAULT_ITR_RX_USECS 125 /* 8k irqs/sec */
-#define IXGBE_DEFAULT_ITR_TX_USECS 250 /* 4k irqs/sec */
-#define IXGBE_MIN_ITR_USECS 100 /* 500k irqs/sec */
-#define IXGBE_MAX_ITR_USECS 10000 /* 100 irqs/sec */
-
/* flow control */
#define IXGBE_DEFAULT_FCRTL 0x10000
#define IXGBE_MIN_FCRTL 0x40
@@ -88,9 +81,6 @@
#define MAXIMUM_ETHERNET_VLAN_SIZE (ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
-/* How many Tx Descriptors do we need to call netif_wake_queue? */
-#define IXGBE_TX_QUEUE_WAKE 16
-
/* How many Rx Buffers do we bundle into one write to the hardware ? */
#define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */
@@ -101,9 +91,6 @@
#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000
#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
-#define IXGBE_MAX_LRO_DESCRIPTORS 8
-#define IXGBE_MAX_LRO_AGGREGATE 32
-
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct ixgbe_tx_buffer {
@@ -119,6 +106,7 @@ struct ixgbe_rx_buffer {
dma_addr_t dma;
struct page *page;
dma_addr_t page_dma;
+ unsigned int page_offset;
};
struct ixgbe_queue_stats {
@@ -154,17 +142,16 @@ struct ixgbe_ring {
/* cpu for tx queue */
int cpu;
#endif
+#ifdef CONFIG_IXGBE_LRO
struct net_lro_mgr lro_mgr;
bool lro_used;
+#endif
struct ixgbe_queue_stats stats;
- u8 v_idx; /* maps directly to the index for this ring in the hardware
- * vector array, can also be used for finding the bit in EICR
- * and friends that represents the vector for this ring */
+ u16 v_idx; /* maps directly to the index for this ring in the hardware
+ * vector array, can also be used for finding the bit in EICR
+ * and friends that represents the vector for this ring */
- u32 eims_value;
- u16 itr_register;
- char name[IFNAMSIZ + 5];
u16 work_limit; /* max work per interrupt */
u16 rx_buf_len;
};
@@ -191,8 +178,8 @@ struct ixgbe_q_vector {
DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */
u8 rxr_count; /* Rx ring count assigned to this vector */
u8 txr_count; /* Tx ring count assigned to this vector */
- u8 tx_eitr;
- u8 rx_eitr;
+ u8 tx_itr;
+ u8 rx_itr;
u32 eitr;
};
@@ -240,7 +227,9 @@ struct ixgbe_adapter {
/* TX */
struct ixgbe_ring *tx_ring; /* One per active queue */
+ int num_tx_queues;
u64 restart_queue;
+ u64 hw_csum_tx_good;
u64 lsc_int;
u64 hw_tso_ctxt;
u64 hw_tso6_ctxt;
@@ -249,12 +238,10 @@ struct ixgbe_adapter {
/* RX */
struct ixgbe_ring *rx_ring; /* One per active queue */
- u64 hw_csum_tx_good;
+ int num_rx_queues;
u64 hw_csum_rx_error;
u64 hw_csum_rx_good;
u64 non_eop_descs;
- int num_tx_queues;
- int num_rx_queues;
int num_msix_vectors;
struct ixgbe_ring_feature ring_feature[3];
struct msix_entry *msix_entries;
@@ -301,14 +288,23 @@ struct ixgbe_adapter {
struct ixgbe_hw_stats stats;
/* Interrupt Throttle Rate */
- u32 rx_eitr;
- u32 tx_eitr;
+ u32 eitr_param;
unsigned long state;
u64 tx_busy;
+#ifndef IXGBE_NO_INET_LRO
u64 lro_aggregated;
u64 lro_flushed;
u64 lro_no_desc;
+#endif
+ unsigned int tx_ring_count;
+ unsigned int rx_ring_count;
+
+ u32 link_speed;
+ bool link_up;
+ unsigned long link_check_timeout;
+
+ struct work_struct watchdog_task;
};
enum ixbge_state_t {
@@ -330,11 +326,11 @@ extern int ixgbe_up(struct ixgbe_adapter *adapter);
extern void ixgbe_down(struct ixgbe_adapter *adapter);
extern void ixgbe_reinit_locked(struct ixgbe_adapter *adapter);
extern void ixgbe_reset(struct ixgbe_adapter *adapter);
-extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
extern void ixgbe_set_ethtool_ops(struct net_device *netdev);
-extern int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *rxdr);
-extern int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *txdr);
+extern int ixgbe_setup_rx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
+extern int ixgbe_setup_tx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
+extern void ixgbe_free_rx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
+extern void ixgbe_free_tx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
+extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
#endif /* _IXGBE_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index ba09063..7cddcfb 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -20,7 +20,6 @@
the file called "COPYING".
Contact Information:
- Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
@@ -39,68 +38,59 @@
#define IXGBE_82598_MC_TBL_SIZE 128
#define IXGBE_82598_VFT_TBL_SIZE 128
-static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *autoneg);
-static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
- u32 *speed, bool *autoneg);
-static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up);
-static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
+static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
-
+static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+/**
+ */
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
{
- hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
- hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
- hw->mac.mcft_size = IXGBE_82598_MC_TBL_SIZE;
- hw->mac.vft_size = IXGBE_82598_VFT_TBL_SIZE;
- hw->mac.num_rar_entries = IXGBE_82598_RAR_ENTRIES;
-
- /* PHY ops are filled in by default properly for Fiber only */
- if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) {
- hw->mac.ops.setup_link = &ixgbe_setup_copper_link_82598;
- hw->mac.ops.setup_link_speed = &ixgbe_setup_copper_link_speed_82598;
- hw->mac.ops.get_link_settings =
- &ixgbe_get_copper_link_settings_82598;
-
- /* Call PHY identify routine to get the phy type */
- ixgbe_identify_phy(hw);
-
- switch (hw->phy.type) {
- case ixgbe_phy_tn:
- hw->phy.ops.setup_link = &ixgbe_setup_tnx_phy_link;
- hw->phy.ops.check_link = &ixgbe_check_tnx_phy_link;
- hw->phy.ops.setup_link_speed =
- &ixgbe_setup_tnx_phy_link_speed;
- break;
- default:
- break;
- }
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+
+ /* Call PHY identify routine to get the phy type */
+ ixgbe_identify_phy_generic(hw);
+
+ /* PHY Init */
+ switch (phy->type) {
+ default:
+ break;
}
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
+ mac->ops.setup_link_speed =
+ &ixgbe_setup_copper_link_speed_82598;
+ mac->ops.get_link_capabilities =
+ &ixgbe_get_copper_link_capabilities_82598;
+ }
+
+ mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+ mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
+
return 0;
}
/**
- * ixgbe_get_link_settings_82598 - Determines default link settings
+ * ixgbe_get_link_capabilities_82598 - Determines link capabilities
* @hw: pointer to hardware structure
* @speed: pointer to link speed
* @autoneg: boolean auto-negotiation value
*
- * Determines the default link settings by reading the AUTOC register.
+ * Determines the link capabilities by reading the AUTOC register.
**/
-static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *autoneg)
+static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
{
s32 status = 0;
s32 autoc_reg;
@@ -149,15 +139,16 @@ static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
}
/**
- * ixgbe_get_copper_link_settings_82598 - Determines default link settings
+ * ixgbe_get_copper_link_capabilities_82598 - Determines link capabilities
* @hw: pointer to hardware structure
* @speed: pointer to link speed
* @autoneg: boolean auto-negotiation value
*
- * Determines the default link settings by reading the AUTOC register.
+ * Determines the link capabilities by reading the AUTOC register.
**/
-static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
- u32 *speed, bool *autoneg)
+s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
{
s32 status = IXGBE_ERR_LINK_SETUP;
u16 speed_ability;
@@ -165,9 +156,9 @@ static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
*speed = 0;
*autoneg = true;
- status = ixgbe_read_phy_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &speed_ability);
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &speed_ability);
if (status == 0) {
if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
@@ -195,11 +186,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
case IXGBE_DEV_ID_82598EB_CX4:
case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+ case IXGBE_DEV_ID_82598EB_XF_LR:
media_type = ixgbe_media_type_fiber;
break;
- case IXGBE_DEV_ID_82598AT_DUAL_PORT:
- media_type = ixgbe_media_type_copper;
- break;
default:
media_type = ixgbe_media_type_unknown;
break;
@@ -209,6 +198,122 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
}
/**
+ * ixgbe_setup_fc_82598 - Configure flow control settings
+ * @hw: pointer to hardware structure
+ * @packetbuf_num: packet buffer number (0-7)
+ *
+ * Configures the flow control settings based on SW configuration. This
+ * function is used for 802.3x flow control configuration only.
+ **/
+s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+ u32 frctl_reg;
+ u32 rmcs_reg;
+
+ if (packetbuf_num < 0 || packetbuf_num > 7) {
+ hw_dbg(hw, "Invalid packet buffer number [%d], expected range is"
+ " 0-7\n", packetbuf_num);
+ }
+
+ frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+ rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+ /*
+ * 10 gig parts do not have a word in the EEPROM to determine the
+ * default flow control setting, so we explicitly set it to full.
+ */
+ if (hw->fc.type == ixgbe_fc_default)
+ hw->fc.type = ixgbe_fc_full;
+
+ /*
+ * We want to save off the original Flow Control configuration just in
+ * case we get disconnected and then reconnected into a different hub
+ * or switch with different Flow Control capabilities.
+ */
+ hw->fc.original_type = hw->fc.type;
+
+ /*
+ * The possible values of the "flow_control" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames but not
+ * send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do not
+ * support receiving pause frames)
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.type) {
+ case ixgbe_fc_none:
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled,
+ * and Tx Flow control is disabled.
+ */
+ frctl_reg |= IXGBE_FCTRL_RFCE;
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is disabled,
+ * by a software over-ride.
+ */
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ case ixgbe_fc_full:
+ /*
+ * Flow control (both Rx and Tx) is enabled by a software
+ * over-ride.
+ */
+ frctl_reg |= IXGBE_FCTRL_RFCE;
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ default:
+ /* We should never get here. The value should be 0-3. */
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ break;
+ }
+
+ /* Enable 802.3x based flow control settings. */
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+ /*
+ * Check for invalid software configuration, zeros are completely
+ * invalid for all parameters used past this point, and if we enable
+ * flow control with zero water marks, we blast flow control packets.
+ */
+ if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
+ hw_dbg(hw, "Flow control structure initialized incorrectly\n");
+ return IXGBE_ERR_INVALID_LINK_SETTINGS;
+ }
+
+ /*
+ * We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of
+ * XON frames.
+ */
+ if (hw->fc.type & ixgbe_fc_tx_pause) {
+ if (hw->fc.send_xon) {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+ (hw->fc.low_water | IXGBE_FCRTL_XONE));
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+ hw->fc.low_water);
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
+ (hw->fc.high_water)|IXGBE_FCRTH_FCEN);
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+
+ return 0;
+}
+
+/**
* ixgbe_setup_mac_link_82598 - Configures MAC link settings
* @hw: pointer to hardware structure
*
@@ -252,8 +357,7 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
}
if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
- hw_dbg(hw,
- "Autonegotiation did not complete.\n");
+ hw_dbg(hw, "Autonegotiation did not complete.\n");
}
}
}
@@ -263,8 +367,8 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
* case we get disconnected and then reconnected into a different hub
* or switch with different Flow Control capabilities.
*/
- hw->fc.type = hw->fc.original_type;
- ixgbe_setup_fc(hw, 0);
+ hw->fc.original_type = hw->fc.type;
+ ixgbe_setup_fc_82598(hw, 0);
/* Add delay to filter out noises during initial link setup */
msleep(50);
@@ -277,20 +381,35 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
* @hw: pointer to hardware structure
* @speed: pointer to link speed
* @link_up: true is link is up, false otherwise
+ * @link_up_wait_to_complete: bool used to wait for link up or not
*
* Reads the links register to determine if link is up and the current speed
**/
-static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up)
+static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *link_up,
+ bool link_up_wait_to_complete)
{
u32 links_reg;
+ u32 i;
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
-
- if (links_reg & IXGBE_LINKS_UP)
- *link_up = true;
- else
- *link_up = false;
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+ if (links_reg & IXGBE_LINKS_UP) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msleep(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ }
+ } else {
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = true;
+ else
+ *link_up = false;
+ }
if (links_reg & IXGBE_LINKS_SPEED)
*speed = IXGBE_LINK_SPEED_10GB_FULL;
@@ -300,6 +419,7 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
return 0;
}
+
/**
* ixgbe_setup_mac_link_speed_82598 - Set MAC link speed
* @hw: pointer to hardware structure
@@ -310,18 +430,18 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
* Set the link speed in the AUTOC register and restarts link.
**/
static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
- u32 speed, bool autoneg,
- bool autoneg_wait_to_complete)
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
{
s32 status = 0;
/* If speed is 10G, then check for CX4 or XAUI. */
if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
- (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4)))
+ (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4))) {
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
- else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg))
+ } else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg)) {
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
- else if (autoneg) {
+ } else if (autoneg) {
/* BX mode - Autonegotiate 1G */
if (!(hw->mac.link_attach_type & IXGBE_AUTOC_1G_PMA_PMD))
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_AN;
@@ -340,7 +460,7 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
* ixgbe_hw This will write the AUTOC register based on the new
* stored values
*/
- hw->mac.ops.setup_link(hw);
+ ixgbe_setup_mac_link_82598(hw);
}
return status;
@@ -358,18 +478,17 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
**/
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
{
- s32 status = 0;
+ s32 status;
/* Restart autonegotiation on PHY */
- if (hw->phy.ops.setup_link)
- status = hw->phy.ops.setup_link(hw);
+ status = hw->phy.ops.setup_link(hw);
- /* Set MAC to KX/KX4 autoneg, which defaultis to Parallel detection */
+ /* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
/* Set up MAC */
- hw->mac.ops.setup_link(hw);
+ ixgbe_setup_mac_link_82598(hw);
return status;
}
@@ -383,23 +502,23 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
*
* Sets the link speed in the AUTOC register in the MAC and restarts link.
**/
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
+static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
{
- s32 status = 0;
+ s32 status;
/* Setup the PHY according to input speed */
- if (hw->phy.ops.setup_link_speed)
- status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
- autoneg_wait_to_complete);
+ status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ autoneg_wait_to_complete);
/* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
/* Set up MAC */
- hw->mac.ops.setup_link(hw);
+ ixgbe_setup_mac_link_82598(hw);
return status;
}
@@ -408,7 +527,7 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
* ixgbe_reset_hw_82598 - Performs hardware reset
* @hw: pointer to hardware structure
*
- * Resets the hardware by reseting the transmit and receive units, masks and
+ * Resets the hardware by resetting the transmit and receive units, masks and
* clears all interrupts, performing a PHY reset, and performing a link (MAC)
* reset.
**/
@@ -422,35 +541,44 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
u8 analog_val;
/* Call adapter stop to disable tx/rx and clear interrupts */
- ixgbe_stop_adapter(hw);
+ hw->mac.ops.stop_adapter(hw);
/*
- * Power up the Atlas TX lanes if they are currently powered down.
- * Atlas TX lanes are powered down for MAC loopback tests, but
+ * Power up the Atlas Tx lanes if they are currently powered down.
+ * Atlas Tx lanes are powered down for MAC loopback tests, but
* they are not automatically restored on reset.
*/
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
- /* Enable TX Atlas so packets can be transmitted again */
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+ /* Enable Tx Atlas so packets can be transmitted again */
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, analog_val);
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ analog_val);
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &analog_val);
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, analog_val);
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ analog_val);
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &analog_val);
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, analog_val);
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ analog_val);
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &analog_val);
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, analog_val);
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ analog_val);
}
/* Reset PHY */
- ixgbe_reset_phy(hw);
+ if (hw->phy.reset_disable == false)
+ hw->phy.ops.reset(hw);
/*
* Prevent the PCI-E bus from from hanging by disabling PCI-E master
@@ -503,29 +631,311 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
} else {
hw->mac.link_attach_type =
- (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE);
+ (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE);
hw->mac.link_mode_select = (autoc & IXGBE_AUTOC_LMS_MASK);
hw->mac.link_settings_loaded = true;
}
/* Store the permanent mac address */
- ixgbe_get_mac_addr(hw, hw->mac.perm_addr);
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
return status;
}
+/**
+ * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq set index
+ **/
+s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+ rar_high &= ~IXGBE_RAH_VIND_MASK;
+ rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq clear index (not used in 82598, but elsewhere)
+ **/
+static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ if (rar < rar_entries) {
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(r
