> Hi Fabio,
>
> On Wed, 23 Jul 2008 21:50:24 +0200, Fabio Comolli wrote:
>> Hi.
>>
>> On Wed, Jul 23, 2008 at 8:56 PM, Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
>> > On Tuesday 22 July 2008 12:56:36 pm Fabio Comolli wrote:
>> >> Linus' GIT tree 2.6.26-05752-g93ded9b shows this message:
>> >>
>> >> i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> >> ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI
>> >> region SMBI [0x18e0-0x18ef]
>> >> ACPI: Device needs an ACPI driver
>> >>
>> >> There is no equivalent in 2.6.26 or previous kernels.
>> >
>> > The "ACPI: I/O resource ... conflicts with ..." message was added by
>> > Thomas:
>> >
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=df92e6...
>> >
>> > That conflict checking infrastructure was in 2.6.26, but Jean's
>> > change to make the i801_smbus driver use it didn't happen until
>> > about a week ago:
>> >
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=54fb4a...
>> >
>> > The message is telling us that the i801_smbus driver thinks it owns
>> > the 0x18e0-0x18ff region, but there's also an ACPI opregion that
>> > references that region. There's no coordination between ACPI and
>> > the i801_smbus driver, so there may be issues where nearly
>> > simultaneous accesses cause incorrect behavior, e.g,. one may
>> > read the wrong value from a temperature sensor. That, of course,
>> > can lead to more serious things like unintended machine shutdowns.
>> >
>> > I don't have any ideas about how to address this. I think Thomas's
>> > intent was to collect better information for unreproducible bugs.
>> > (Maybe this sort of conflict should even set a taint flag?)
>
> Yes, at this point these messages are informative only and displayed as
> a hint when investigating bug reports. In the long run, we might
> decide to grant exclusive access to the shared region to either ACPI or
> the native driver, or to setup a safe concurrent access mechanism.
> That's a long way to go though, due to the diversity of BIOSes out
> there and the fact that many of them declare opregions in bogus ways.
>
>> OK, I actually didn't even know what i801_smbus (i2c_801 I suppose)
>> was. It seems that my laptop has a super-IO chip which is detected by
>> lm-sensors as `Nat. Semi. PC87591 Super IO' which doesn't have a
>> driver and never will.
>>
>> So, if I'm correct, this modules is totally useless for me and I
>> better compile it out. Am I correct?
>
> Yes you are. If you don't need i2c-i801 on this machine, best is to not
> build it or to prevent it from loading. Or you can boot with
> acpi_enforce_resources=strict to prevent the i2c-i801 driver from
> attaching to the device.
>
