Hello.

Bartlomiej Zolnierkiewicz wrote:

quoted text
> [PATCH] ide: don't allow DMA to be enabled if CONFIG_IDEDMA_{ICS,PCI}_AUTO=n

quoted text
> For CONFIG_IDEDMA_{ICS,PCI}_AUTO=n and/or "ide=nodma" option the host/device

    Not only that: it also would affect CompactFlash with no DMA support but 
with DMA autotuning enabled in IDE core...

quoted text
> are not programmed for DMA and it is also explicitly disabled by ide_set_dma()
> (->ide_dma_check returns "-1").  However the code responsible for manually
> enabling DMA ("hdparm -d 1") has a bug which results in DMA being erroneously
> enabled - ide_set_dma() incorrectly passes "0" return value to set_using_dma().

    Heh, I've just run into this myself while trying to retro-fit Palmchip 
BK3710 IDE driver into 2.6.18 properly.

quoted text
> This may work if BIOS/firmware configured the host/device for DMA and chipset
> allows independent configuration of DMA/PIO modes but won't work after suspend
> and is generally unsafe on many chipsets (possibly including data corruption
> if the same registers are used for DMA/PIO timings).

    Timeouts ensued in my case...

WBR, Sergei
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/