On Mon, 21 Jul 2008, Robert Hancock wrote:

quoted text
> (adding CCs)
> 
> Tomas Styblo wrote:
> > 
> > Hello,
> > 
> > this message includes a patch that provides a workaround for
> > a silent data corruption bug caused by incorrect error handling in
> > the JMicron JM20337 Hi-Speed USB to SATA & PATA Combo Bridge chipset,
> > USB device id 152d:2338.

The two of you should read through

	http://bugzilla.kernel.org/show_bug.cgi?id=9638

which concerns this very problem.

quoted text
> > - the problem occurs quite rarely, approx. once for 
> >   every 20 GB of transfered data during heavy load
> > 
> > - it seems that only read operations are affected
> > 
> > - the problem is accompanied by these messages in syslog each
> >   time it occurs:
> > 
> > May 17 15:06:56 kernel: sd 6:0:0:0: [sdb] Sense Key : 0x0 [current] 
> > May 17 15:06:56 kernel: sd 6:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
> > 
> > - the bug is not detected as an error and incorrect data is returned, 
> >   causing insidious data corruption
> > 
> > - tested with 3 external disk enclosures (Akasa Integral AK-ENP2SATA-BL) 
> >   with different disks on different computers, with kernel 2.6.24 and 2.6.25
> > 
> > - the patch provides a crude workaround by detecting the error condition
> >   and retrying the faulty transfer
> > 
> > 
> > The fix needs a review as I don't know much about USB and SCSI.  
> > It's possible that this approach is wrong and that the problem should
> > be fixed somewhere else.
> > 
> > There are other problems with this chipset that make it necessary 
> > to disconnect and power off the enclosure from time to time, but at least
> > there's no data corruption anymore.
> 
> I'm not sure this is a good approach. More that this code right above in 
> usb_stor_invoke_transport, which your code undoes the effect of for this 
> device, doesn't seem right:
> 
> 	/* If things are really okay, then let's show that.  Zero
> 	 * out the sense buffer so the higher layers won't realize
> 	 * we did an unsolicited auto-sense. */
> 	if (result == USB_STOR_TRANSPORT_GOOD &&
> 		/* Filemark 0, ignore EOM, ILI 0, no sense */
> 			(srb->sense_buffer[2] & 0xaf) == 0 &&
> 		/* No ASC or ASCQ */
> 			srb->sense_buffer[12] == 0 &&
> 			srb->sense_buffer[13] == 0) {
> 		srb->result = SAM_STAT_GOOD;
> 		srb->sense_buffer[0] = 0x0;
> 	}
> 
> So if the transport initially gets a failure, but then request sense 
> doesn't show any error, we just go "hmm, guess it was ok after all". 
> That seems kind of dangerous, I shouldn't think we should assume a 

No, no -- you have misread the code.  If the transport initially got a 
failure then result would be equal to USB_STOR_TRANSPORT_FAILED, not 
USB_STOR_TRANSPORT_GOOD, so this code wouldn't run.

quoted text
> If you just delete that code above, does the corruption go away?

Alan Stern

--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/