Steven Rostedt wrote:
quoted text
> On Tue, 1 Jul 2008, Wolfgang Grandegger wrote:
>> I continue this thread because it's still not understood why enabling
>> CONFIG_RCU_TRACE is necessary to get reasonable latencies on the
>> MPC5200. It might also explain, why I get much worse latencies with
>> 2.6.25.8-rt7.
> 
> Have you tried turning on ftrace?

Not yet.

quoted text
> 
>> To recapitulate, with CONFIG_RCU_TRACE enabled, cyclictest reports max.
>> latencies of approx. 130 us with 2.6.24.4-rt4 on my MPC5200 PowerPC
>> board. If I disable it, the latency goes up to 600 us. Obviously, the
>> trace_mark() calls in rcupreempt*.c have some positive impact on the
>> latency. I narrowed down, that the 2 calls in __rcu_preempt_boost() in
>> rcupreempt-boost.c are the important one:
>>
>> void __rcu_preempt_unboost(void)
>> {
>> 	struct task_struct *curr = current;
>> 	struct rcu_boost_dat *rbd;
>> 	int prio;
>> 	unsigned long flags;
>>
>> 	trace_mark(unboost_called, "NULL");

To make it clear: If I just comment out the line above and ...

quoted text
>>
>> 	/* if not boosted, then ignore */
>> 	if (likely(!rcu_is_boosted(curr)))
>> 		return;
> 
> I wonder if the "likely" is faulty on the PPC code generation. Have you
> tried removing that "likely" statement.
> 
>> 	/*
>> 	 * Need to be very careful with NMIs.
>> 	 * If we take the lock and an NMI comes in
>> 	 * and it may try to unboost us if curr->rcub_rbdp
>> 	 * is still set. So we zero it before grabbing the lock.
>> 	 * But this also means that we might be boosted again
>> 	 * so the boosting code needs to be aware of this.
>> 	 */
>> 	rbd = curr->rcub_rbdp;
>> 	curr->rcub_rbdp = NULL;
>>
>> 	/*
>> 	 * Now an NMI might have came in after we grab
>> 	 * the below lock. This check makes sure that
>> 	 * the NMI doesn't try grabbing the lock
>> 	 * while we already have it.
>> 	 */
>> 	if (unlikely(!rbd))
>> 		return;
> 
> Actually, remove all "likely" and "unlikely". The marker code could be
> making it work better. But still, this shouldn't cause 600us latencies.
> 
>> 	spin_lock_irqsave(&rbd->rbs_lock, flags);
>> 	/*
>> 	 * It is still possible that an NMI came in
>> 	 * between the "is_boosted" check and setting
>> 	 * the rcu_rbdp to NULL. This would mean that
>> 	 * the NMI already dequeued us.
>> 	 */
>> 	if (unlikely(!rcu_is_boosted(curr)))
>> 		goto out;
>>
>> 	list_del_init(&curr->rcub_entry);
>>
>> 	trace_mark(unboosted, "NULL");

.. this one as well, then the latency goes *up* to 600us. The first one 
has more influence, though.

quoted text
>>
>> 	curr->rcu_prio = MAX_PRIO;
>>
>> 	spin_lock(&curr->pi_lock);
>> 	prio = rt_mutex_getprio(curr);
>> 	task_setprio(curr, prio);
>>
>> 	curr->rcub_rbdp = NULL;
>>
>> 	spin_unlock(&curr->pi_lock);
>>   out:
>> 	spin_unlock_irqrestore(&rbd->rbs_lock, flags);
>> }
>>
>> With them and all other trace_mark() calls commented out, the latency is
>> still OK. The first one has a bigger impact.
>>
>> In 2.6.25.8-rt7, trace_mark() is not used any more but a function
>> incrementing the corresponding counter directly and I suspect that's the
>> reason why I'm seeing high latencies with both, CONFIG_RCU_TRACE enabled
>> and disabled.
>>
>> I hope this observation sheds some light on the issue.
> 
> It is still a mystery to me. Maybe looking at the different assembly
> outputs with the different configurations.

There seems to be something in trace_mark() keeping latency low:

   http://lxr.linux.no/linux+v2.6.24.4/include/linux/marker.h#L52

I will follow your suggestions.

Wolfgang.

--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/