Different tools generate slightly different formats of the isight
firmware. Ensure that the firmware buffer is not overrun, while still
ensuring that the correct amount of data is written if trailing data is
prseent.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index 390e048..9f30aa1 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -39,9 +39,12 @@ static int isight_firmware_load(struct usb_interface *intf,
struct usb_device *dev = interface_to_usbdev(intf);
int llen, len, req, ret = 0;
const struct firmware *firmware;
- unsigned char *buf;
+ unsigned char *buf = kmalloc(50, GFP_KERNEL);
unsigned char data[4];
- char *ptr;
+ u8 *ptr;
+
+ if (!buf)
+ return -ENOMEM;
if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
printk(KERN_ERR "Unable to load isight firmware\n");
@@ -59,7 +62,7 @@ static int isight_firmware_load(struct usb_interface *intf,
goto out;
}
- while (1) {
+ while (ptr+4 <= firmware->data+firmware->size) {
memcpy(data, ptr, 4);
len = (data[0] << 8 | data[1]);
req = (data[2] << 8 | data[3]);
@@ -71,10 +74,14 @@ static int isight_firmware_load(struct usb_interface *intf,
continue;
for (; len > 0; req += 50) {
- llen = len > 50 ? 50 : len;
+ llen = min(len, 50);
len -= llen;
-
- buf = kmalloc(llen, GFP_KERNEL);
+ if (ptr+llen > firmware->data+firmware->size) {
+ printk(KERN_ERR
+ "Malformed isight firmware");
+ ret = -ENODEV;
+ goto out;
+ }
memcpy(buf, ptr, llen);
ptr += llen;
@@ -89,16 +96,18 @@ static int isight_firmware_load(struct usb_interface *intf,
goto out;
}
- kfree(buf);
}
}
+
if (usb_control_msg
(dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
300) != 1) {
printk(KERN_ERR "isight firmware loading completion failed\n");
ret = -ENODEV;
}
+
out:
+ kfree(buf);
release_firmware(firmware);
return ret;
}
--
Matthew Garrett | mjg59@srcf.ucam.org
--
