On Fri, Jun 06, 2008 at 11:29:15AM +0200, Haavard Skinnemoen wrote:

quoted text
> But I would have thought that if you have a PC sound card with an
> on-board i2s bus and a standard codec, you could create a board driver
> by simply hooking the different parts together, possibly with a custom
> i2s bus driver?

If the card has been built in that way then yes, you could do that.

quoted text
> Geoffrey Wossum <geoffrey@pager.net> wrote:

quoted text
> >  - I think PC sound cards tend to be black boxes regarding power consumption, 
> > especially those white box cards you can get at Fry's and similar places.   

quoted text
> Right...so it's a matter of documentation. I suspect those white box
> cards still use cheap, standard hardware under the hood, though maybe
> that fact is pretty well hidden.

There may just not be the control exposed - there's quite a lot of parts
intended for simple applications which may only offer a few bits of
control for things like mute done via setting levels on pins.

quoted text
> away. For example, a particular AC97 codec chip may be used with a
> different driver depending on whether it's soldered on a PC motherboard
> or some embedded board. That feels wrong to me.

That should really only be required if you're using features which go
substantially outside the AC97 spec (modulo perhaps needing to make
ac97.c glue more stuff together).
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/