login
Search
Register secondary interface also when user requested not to probe devices.
While at it:
- remove write-only second_port_toggled variable
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/pci/cmd640.c | 51 +++++++++++++++++++----------------------------
1 file changed, 21 insertions(+), 30 deletions(-)
Index: b/drivers/ide/pci/cmd640.c
===================================================================
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -687,9 +687,6 @@ static int cmd640x_init_one(unsigned lon
*/
static int __init cmd640x_init(void)
{
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- int second_port_toggled = 0;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
int second_port_cmd640 = 0, rc;
const char *bus_type, *port2;
unsigned int index;
@@ -778,46 +775,40 @@ static int __init cmd640x_init(void)
put_cmd640_reg(CMDTIM, 0);
put_cmd640_reg(BRST, 0x40);
- cmd_hwif1 = ide_find_port();
+ b = get_cmd640_reg(CNTRL);
/*
* Try to enable the secondary interface, if not already enabled
*/
- if (cmd_hwif1 &&
- cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) {
- port2 = "not probed";
+ if (secondary_port_responding()) {
+ if ((b & CNTRL_ENA_2ND)) {
+ second_port_cmd640 = 1;
+ port2 = "okay";
+ } else if (cmd640_vlb) {
+ second_port_cmd640 = 1;
+ port2 = "alive";
+ } else
+ port2 = "not cmd640";
} else {
- b = get_cmd640_reg(CNTRL);
+ put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
if (secondary_port_responding()) {
- if ((b & CNTRL_ENA_2ND)) {
- second_port_cmd640 = 1;
- port2 = "okay";
- } else if (cmd640_vlb) {
- second_port_cmd640 = 1;
- port2 = "alive";
- } else
- port2 = "not cmd640";
+ second_port_cmd640 = 1;
+ port2 = "enabled";
} else {
- put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
- if (secondary_port_responding()) {
- second_port_cmd640 = 1;
-#ifdef ...Convert the driver to use struct ide_port_info.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/arm/rapide.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
Index: b/drivers/ide/arm/rapide.c
===================================================================
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -11,6 +11,10 @@
#include <asm/ecard.h>
+static struct const ide_port_info rapide_port_info = {
+ .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+};
+
static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base,
void __iomem *ctrl, unsigned int sz, int irq)
{
@@ -53,12 +57,11 @@ rapide_probe(struct expansion_card *ec,
ide_init_port_hw(hwif, &hw);
- hwif->host_flags = IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
idx[0] = hwif->index;
- ide_device_add(idx, NULL);
+ ide_device_add(idx, &rapide_port_info);
ecard_set_drvdata(ec, hwif);
goto out;
--
Change ->port_init_devs method to take 'ide_drive_t *' as an argument
instead of 'ide_hwif_t *' and rename it to ->init_dev.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-probe.c | 6 +++---
drivers/ide/legacy/ht6560b.c | 8 ++++----
drivers/ide/legacy/ide-4drives.c | 10 ++++------
drivers/ide/legacy/qd65xx.c | 16 ++++++++--------
drivers/ide/pci/opti621.c | 7 +++----
include/linux/ide.h | 4 ++--
6 files changed, 24 insertions(+), 27 deletions(-)
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1326,10 +1326,10 @@ static void ide_port_init_devices(ide_hw
drive->unmask = 1;
if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
drive->no_unmask = 1;
- }
- if (port_ops && port_ops->port_init_devs)
- port_ops->port_init_devs(hwif);
+ if (port_ops && port_ops->init_dev)
+ port_ops->init_dev(drive);
+ }
}
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
Index: b/drivers/ide/legacy/ht6560b.c
===================================================================
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -310,16 +310,16 @@ static void ht6560b_set_pio_mode(ide_dri
#endif
}
-static void __init ht6560b_port_init_devs(ide_hwif_t *hwif)
+static void __init ht6560b_init_dev(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
/* Setting default configurations for drives. */
int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT;
if (hwif->channel)
t |= (HT_SECONDARY_IF << 8);
- hwif->drives[0].drive_data = t;
- hwif->drives[1].drive_data = t;
+ drive->drive_data = t;
}
static int probe_ht6560b;
@@ -328,7 +328,7 @@ module_param_named(probe, probe_ht6560b,
MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
...Convert the driver to use struct ide_port_info.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/h8300/ide-h8300.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
Index: b/drivers/ide/h8300/ide-h8300.c
===================================================================
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -176,6 +176,10 @@ static inline void hwif_setup(ide_hwif_t
hwif->output_data = h8300_output_data;
}
+static const struct ide_port_info h8300_port_info = {
+ .host_flags = IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA,
+};
+
static int __init h8300_ide_init(void)
{
hw_regs_t hw;
@@ -201,12 +205,11 @@ static int __init h8300_ide_init(void)
index = hwif->index;
ide_init_port_hw(hwif, &hw);
hwif_setup(hwif);
- hwif->host_flags = IDE_HFLAG_NO_IO_32BIT;
printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index);
idx[0] = index;
- ide_device_add(idx, NULL);
+ ide_device_add(idx, &h8300_port_info);
return 0;
--
Convert the driver to use ->init_dev method instead of open-coding devices
init in cmd640x_init().
While at it:
- fix printk()-s to use KERN_INFO level instead of the default KERN_ERR
- use DRV_NAME define in printk()-s
- set proper ->pio_mask also for CONFIG_BLK_DEV_CMD640_ENHANCED=n
There should be no functional changes caused by this patch
(except fixing printk()-s levels).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/pci/cmd640.c | 72 +++++++++++++++++++----------------------------
1 file changed, 30 insertions(+), 42 deletions(-)
Index: b/drivers/ide/pci/cmd640.c
===================================================================
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -611,11 +611,40 @@ static void cmd640_set_pio_mode(ide_driv
display_clocks(index);
}
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+
+static void cmd640_init_dev(ide_drive_t *drive)
+{
+ unsigned int i = drive->hwif->channel * 2 + drive->select.b.unit;
+
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ /*
+ * Reset timing to the slowest speed and turn off prefetch.
+ * This way, the drive identify code has a better chance.
+ */
+ setup_counts[i] = 4; /* max possible */
+ active_counts[i] = 16; /* max possible */
+ recovery_counts[i] = 16; /* max possible */
+ program_drive_counts(drive, i);
+ set_prefetch_mode(drive, i, 0);
+ printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i);
+#else
+ /*
+ * Set the drive unmask flags to match the prefetch setting.
+ */
+ check_prefetch(drive, i);
+ printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n",
+ i, drive->no_io_32bit ? "off" : "on");
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+}
+
static const struct ide_port_ops cmd640_port_ops = {
+ .init_dev = cmd640_init_dev,
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
.set_pio_mode = cmd640_set_pio_mode,
+#endif
};
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
static int ...Convert the driver to use struct ide_port_info.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/legacy/ide_platform.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
Index: b/drivers/ide/legacy/ide_platform.c
===================================================================
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -44,6 +44,10 @@ static void __devinit plat_ide_setup_por
hw->chipset = ide_generic;
}
+static const struct ide_port_info platform_ide_port_info = {
+ .host_flags = IDE_HFLAG_NO_DMA,
+};
+
static int __devinit plat_ide_probe(struct platform_device *pdev)
{
struct resource *res_base, *res_alt, *res_irq;
@@ -54,6 +58,7 @@ static int __devinit plat_ide_probe(stru
int ret = 0;
int mmio = 0;
hw_regs_t hw;
+ struct ide_port_info d = platform_ide_port_info;
pdata = pdev->dev.platform_data;
@@ -102,13 +107,13 @@ static int __devinit plat_ide_probe(stru
ide_init_port_hw(hwif, &hw);
if (mmio) {
- hwif->host_flags = IDE_HFLAG_MMIO;
+ d.host_flags |= IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
}
idx[0] = hwif->index;
- ide_device_add(idx, NULL);
+ ide_device_add(idx, &d);
platform_set_drvdata(pdev, hwif);
--
* Add DRV_NAME define to ide-h8300.c.
* Fix ide-h8300.c, swarm.c and sgiioc4.c to set .name field in
struct ide_port_info to DRV_NAME, then convert these host drivers
to use ide_find_port_slot() instead of ide_find_port().
* Print message on error in ide_find_port_slot().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/h8300/ide-h8300.c | 8 ++++----
drivers/ide/ide-probe.c | 3 +++
drivers/ide/mips/swarm.c | 7 +++----
drivers/ide/pci/scc_pata.c | 7 ++-----
drivers/ide/pci/sgiioc4.c | 8 +++-----
drivers/ide/setup-pci.c | 5 +----
6 files changed, 16 insertions(+), 22 deletions(-)
Index: b/drivers/ide/h8300/ide-h8300.c
===================================================================
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -8,6 +8,8 @@
#include <asm/io.h>
#include <asm/irq.h>
+#define DRV_NAME "ide-h8300"
+
#define bswap(d) \
({ \
u16 r; \
@@ -196,11 +198,9 @@ static int __init h8300_ide_init(void)
hw_setup(&hw);
- hwif = ide_find_port();
- if (hwif == NULL) {
- printk(KERN_ERR "ide-h8300: IDE I/F register failed\n");
+ hwif = ide_find_port_slot(&h8300_port_info);
+ if (hwif == NULL)
return -ENOENT;
- }
index = hwif->index;
ide_init_port_hw(hwif, &hw);
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1496,6 +1496,9 @@ ide_hwif_t *ide_find_port_slot(const str
}
}
+ printk(KERN_ERR "%s: no free slot for interface\n",
+ d ? d->name : "ide");
+
return NULL;
out_found:
Index: b/drivers/ide/mips/swarm.c
===================================================================
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -62,6 +62,7 @@ static struct resource swarm_ide_resourc
static struct platform_device *swarm_ide_dev;
static const struct ide_port_info ...Print driver banner message early and without interface number.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/h8300/ide-h8300.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: b/drivers/ide/h8300/ide-h8300.c
===================================================================
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -189,6 +189,8 @@ static int __init h8300_ide_init(void)
int index;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
+
if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300"))
goto out_busy;
if (!request_region(CONFIG_H8300_IDE_ALT, H8300_IDE_GAP, "ide-h8300")) {
@@ -205,7 +207,6 @@ static int __init h8300_ide_init(void)
index = hwif->index;
ide_init_port_hw(hwif, &hw);
hwif_setup(hwif);
- printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index);
idx[0] = index;
--
Print driver banner message early and without interface number. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> --- drivers/ide/ide-pnp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) Index: b/drivers/ide/ide-pnp.c =================================================================== --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -33,6 +33,8 @@ static int idepnp_probe(struct pnp_dev * ide_hwif_t *hwif; unsigned long base, ctl; + printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n"); + if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0))) return -1; @@ -64,7 +66,6 @@ static int idepnp_probe(struct pnp_dev * ide_init_port_hw(hwif, &hw); - printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); pnp_set_drvdata(dev, hwif); ide_device_add(idx, NULL); --
Allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE ioctl
and remove no longer needed task_dma_ok()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-taskfile.c | 22 +---------------------
1 file changed, 1 insertion(+), 21 deletions(-)
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -62,25 +62,6 @@ int taskfile_lib_get_identify (ide_drive
return ide_raw_taskfile(drive, &args, buf, 1);
}
-static int inline task_dma_ok(ide_task_t *task)
-{
- if (blk_fs_request(task->rq) || (task->tf_flags & IDE_TFLAG_FLAGGED))
- return 1;
-
- switch (task->tf.command) {
- case WIN_WRITEDMA_ONCE:
- case WIN_WRITEDMA:
- case WIN_WRITEDMA_EXT:
- case WIN_READDMA_ONCE:
- case WIN_READDMA:
- case WIN_READDMA_EXT:
- case WIN_IDENTIFY_DMA:
- return 1;
- }
-
- return 0;
-}
-
static ide_startstop_t task_no_data_intr(ide_drive_t *);
static ide_startstop_t set_geometry_intr(ide_drive_t *);
static ide_startstop_t recal_intr(ide_drive_t *);
@@ -139,8 +120,7 @@ ide_startstop_t do_rw_taskfile (ide_driv
WAIT_WORSTCASE, NULL);
return ide_started;
default:
- if (task_dma_ok(task) == 0 || drive->using_dma == 0 ||
- dma_ops->dma_setup(drive))
+ if (drive->using_dma == 0 || dma_ops->dma_setup(drive))
return ide_stopped;
dma_ops->dma_exec_cmd(drive, tf->command);
dma_ops->dma_start(drive);
--
ide_set_handler() bugs on ->handler == NULL so no need to do it in set_geometry_intr(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> --- drivers/ide/ide-taskfile.c | 1 - 1 file changed, 1 deletion(-) Index: b/drivers/ide/ide-taskfile.c =================================================================== --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -163,7 +163,6 @@ static ide_startstop_t set_geometry_intr if (stat & (ERR_STAT|DRQ_STAT)) return ide_error(drive, "set_geometry_intr", stat); - BUG_ON(HWGROUP(drive)->handler != NULL); ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL); return ide_started; } --
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> --- drivers/ide/ide.c | 13 ------------- 1 file changed, 13 deletions(-) Index: b/drivers/ide/ide.c =================================================================== --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -50,29 +50,16 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/interrupt.h> #include <linux/major.h> #include <linux/errno.h> #include <linux/genhd.h> -#include <linux/blkpg.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/ide.h> #include <linux/completion.h> -#include <linux/reboot.h> -#include <linux/cdrom.h> -#include <linux/seq_file.h> #include <linux/device.h> -#include <linux/bitops.h> - -#include <asm/byteorder.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/io.h> /* default maximum number of failures */ --
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> --- drivers/ide/ide-taskfile.c | 11 ----------- 1 file changed, 11 deletions(-) Index: b/drivers/ide/ide-taskfile.c =================================================================== --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -8,28 +8,17 @@ * The big the bad and the ugly. */ -#include <linux/module.h> #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/sched.h> #include <linux/interrupt.h> -#include <linux/major.h> #include <linux/errno.h> -#include <linux/genhd.h> -#include <linux/blkpg.h> #include <linux/slab.h> -#include <linux/pci.h> #include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> -#include <linux/bitops.h> -#include <linux/scatterlist.h> -#include <asm/byteorder.h> -#include <asm/irq.h> #include <asm/uaccess.h> #include <asm/io.h> --
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> --- drivers/ide/setup-pci.c | 5 ----- 1 file changed, 5 deletions(-) Index: b/drivers/ide/setup-pci.c =================================================================== --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -6,19 +6,14 @@ * May be copied or modified under the terms of the GNU General Public License */ -#include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/interrupt.h> #include <linux/ide.h> -#include <linux/dma-mapping.h> #include <asm/io.h> -#include <asm/irq.h> /** * ide_setup_pci_baseregs - place a PCI IDE controller native --
