On Tue, 10 Jun 2008 09:27:34 +1200, Ryan Mallon wrote:
quoted text
> David Brownell wrote:
> > On Monday 09 June 2008, Ryan Mallon wrote:
> >   
> >>> Talk to i2c and framebuffer people about changing the link order.
> >>>
> >>> i2c should really be initialised before framebuffer devices because
> >>> framebuffer devices tend to want to read DDC from monitors, which is
> >>> basically a I2C EEPROM in the monitor.

This is already the case. i2c-core is initialized with
subsys_initcall(), so it's available to all drivers initialized with
module_init().

quoted text
> >>> ... but there's probably some reason why it's done the way it is today,
> >>> and changing it could well cause stuff to break.
> >>>       
> >> We have made i2c the first driver subsystem to come up in our 2.6.20
> >> kernel since we use i2c io expanders for power domain control. All we
> >> did was change drivers/Makefile so that obj-$(CONFIG_I2C) += i2c/ is at
> >> the very top of the file. We didn't have any problems with doing this.
> >> YMMV of course.

Why don't you simply initialize the drivers in question with
subsys_initcall()? That's what i2c-pnx, i2c-omap, i2c-davinci and
tps65010 are doing at the moment.

quoted text
> > OMAP does much the same thing, for the same reason, and the I2C
> > adapter gets initialized earlier too (so power management chips
> > will be fully usable before driver_initcall code runs).
> >
> > Unless there's a downside on x86, I'd just suggest someone submit
> > a patch moving I2C init "early" so it merges in 2.6.27 ... cc to
> > LKML to scare out more potential problems, but I have a hard time
> > imagining there'd really be any.
>
> Okay, heres the patch. Is untested though (other than our experience 
> under 2.6.20), so it probably needs some people to test. I'm not 
> subscribed to LKML, so can people CC me if necessary.
> 
> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
> 
> diff --git a/drivers/Makefile b/drivers/Makefile
> index f65deda..9eaf236 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -5,6 +5,7 @@
>  # Rewritten to use lists instead of if-statements.
>  #
>  
> +obj-y				+= i2c/
>  obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpio/

Some i2c bus drivers bit-bang GPIO pins...

quoted text
>  obj-$(CONFIG_PCI)		+= pci/

... and many are PCI devices, so will this work OK?

quoted text
>  obj-$(CONFIG_PARISC)		+= parisc/
> @@ -61,7 +62,6 @@ obj-$(CONFIG_GAMEPORT)		+= input/gameport/
>  obj-$(CONFIG_INPUT)		+= input/
>  obj-$(CONFIG_I2O)		+= message/
>  obj-$(CONFIG_RTC_LIB)		+= rtc/
> -obj-y				+= i2c/
>  obj-$(CONFIG_W1)		+= w1/
>  obj-$(CONFIG_POWER_SUPPLY)	+= power/
>  obj-$(CONFIG_HWMON)		+= hwmon/


-- 
Jean Delvare
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/