[v2.6.26-rc1] possible circular locking in ecryptfs

Score:
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
[view in full thread]
From: Ingo Molnar <mingo@...>
To: <linux-kernel@...>, Michael Halcrow <mhalcrow@...>, Eric Sandeen <sandeen@...>
Cc: Peter Zijlstra <a.p.zijlstra@...>
Subject: [v2.6.26-rc1] possible circular locking in ecryptfs
Date: Wednesday, May 7, 2008 - 4:02 pm
x86.git testing found the following "possible circular locking" lockdep 
warning, generated by the ecryptfs code:

| multipath.stati/2972 is trying to acquire lock:
|  (&ecryptfs_daemon_hash_mux){--..}, at: [<ffffffff80321745>] ecryptfs_miscdev_open+0x23/0x13b
|
| but task is already holding lock:
|  (misc_mtx){--..}, at: [<ffffffff8043da31>] misc_open+0x22/0xf0
|
| which lock already depends on the new lock.

with the following config:

  http://redhat.com/~mingo/private/config-Wed_May__7_16_17_31_CEST_2008.bad

full log attached below. Have not looked into the details yet.

	Ingo

---------------------------->
Linux version 2.6.26-rc1-sched-devel.git-x86-latest.git (mingo@dione) (gcc version 4.2.3) #76 Wed May 7 16:18:39 CEST 2008
Command line: root=/dev/sda6 console=ttyS0,115200 earlyprintk=serial,ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=2 profile=0
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
console [earlyser0] enabled
debug: ignoring loglevel setting.
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262128) 1 entries of 256 used
max_pfn_mapped = 1048576
init_memory_mapping
ACPI: RSDP 000F76F0, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 3FFF3180, 6264 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SRAT 3FFF9500, 00A0 (r1 AMD    HAMMER          1 AMD         1)
ACPI: MCFG 3FFF9600, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: APIC 3FFF9440, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262128) 1 entries of 256 used
  early res: 0 [0-fff] BIOS data page
  early res: 1 [6000-7fff] TRAMPOLINE
  early res: 2 [200000-1257737] TEXT DATA BSS
  early res: 3 [9f800-fffff] BIOS reserved
  early res: 4 [8000-afff] PGTABLE
Scan SMP from ffff810000000000 for 1024 bytes.
Scan SMP from ffff81000009fc00 for 1024 bytes.
Scan SMP from ffff8100000f0000 for 65536 bytes.
 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001400000-ffff8100021fffff] on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   262128
On node 0 totalpages: 262031
  DMA zone: 56 pages used for memmap
  DMA zone: 104 pages reserved
  DMA zone: 3839 pages, LIFO batch:0
  DMA32 zone: 3527 pages used for memmap
  DMA32 zone: 254505 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Int: type 0, pol 1, trig 1, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Int: type 0, pol 1, trig 1, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
ACPI: IRQ9 used by override.
Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
mapped APIC to ffffffffff5fb000 (        fee00000)
mapped IOAPIC to ffffffffff5fa000 (00000000fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258344
Kernel command line: root=/dev/sda6 console=ttyS0,115200 earlyprintk=serial,ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=2 profile=0
debug: sysrq always enabled.
kernel profiling enabled (shift: 0)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PIT
time.c: Detected 2010.329 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console handover: boot [earlyser0] -> real [ttyS0]
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1648 kB
 per task-struct memory footprint: 2688 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
                                 | spin |wlock |rlock |mutex | wsem | rsem |
  --------------------------------------------------------------------------
                     A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                    double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                  initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |  ok  |
           recursive read-lock #2:             |  ok  |             |  ok  |
            mixed read-write-lock:             |  ok  |             |  ok  |
            mixed write-read-lock:             |  ok  |             |  ok  |
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 923976k/1048512k available (6311k kernel code, 123500k reserved, 3898k data, 324k init)
CPA: page pool initialized 16 of 16 pages preallocated
Calibrating delay using timer specific routine.. 4025.08 BogoMIPS (lpj=6705737)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
ACPI: Core revision 20080321
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-2 -> 0x32 -> IRQ 2 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
 IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
Using local APIC timer interrupts.
APIC timer calibration result 12564548
Detected 12.564 MHz APIC timer.
Testing NMI watchdog ... OK.
PM: Adding info for No Bus:platform
calling  init_cpufreq_transition_notifier_list+0x0/0x1b()
initcall init_cpufreq_transition_notifier_list+0x0/0x1b() returned 0 after 0 msecs
calling  net_ns_init+0x0/0x140()
net_namespace: 1008 bytes
initcall net_ns_init+0x0/0x140() returned 0 after 3 msecs
calling  cpufreq_tsc+0x0/0x16()
initcall cpufreq_tsc+0x0/0x16() returned 0 after 0 msecs
calling  print_banner+0x0/0xe()
Booting paravirtualized kernel on bare hardware
initcall print_banner+0x0/0xe() returned 0 after 3 msecs
calling  ksysfs_init+0x0/0xbb()
initcall ksysfs_init+0x0/0xbb() returned 0 after 0 msecs
calling  init_jiffies_clocksource+0x0/0x12()
initcall init_jiffies_clocksource+0x0/0x12() returned 0 after 0 msecs
calling  pm_init+0x0/0x34()
initcall pm_init+0x0/0x34() returned 0 after 0 msecs
calling  pm_disk_init+0x0/0x19()
initcall pm_disk_init+0x0/0x19() returned 0 after 0 msecs
calling  swsusp_header_init+0x0/0x2c()
initcall swsusp_header_init+0x0/0x2c() returned 0 after 0 msecs
calling  filelock_init+0x0/0x2e()
initcall filelock_init+0x0/0x2e() returned 0 after 0 msecs
calling  init_misc_binfmt+0x0/0x3f()
initcall init_misc_binfmt+0x0/0x3f() returned 0 after 0 msecs
calling  init_script_binfmt+0x0/0x12()
initcall init_script_binfmt+0x0/0x12() returned 0 after 0 msecs
calling  init_elf_binfmt+0x0/0x12()
initcall init_elf_binfmt+0x0/0x12() returned 0 after 0 msecs
calling  init_compat_elf_binfmt+0x0/0x12()
initcall init_compat_elf_binfmt+0x0/0x12() returned 0 after 0 msecs
calling  debugfs_init+0x0/0x51()
initcall debugfs_init+0x0/0x51() returned 0 after 0 msecs
calling  securityfs_init+0x0/0x51()
initcall securityfs_init+0x0/0x51() returned 0 after 0 msecs
calling  random32_init+0x0/0x1b()
initcall random32_init+0x0/0x1b() returned 0 after 0 msecs
calling  early_resume_init+0x0/0x1d5()
Time: 15:18:58  Date: 05/07/08
initcall early_resume_init+0x0/0x1d5() returned 0 after 3 msecs
calling  cpufreq_core_init+0x0/0x2c()
initcall cpufreq_core_init+0x0/0x2c() returned 0 after 0 msecs
calling  sock_init+0x0/0x5e()
initcall sock_init+0x0/0x5e() returned 0 after 3 msecs
calling  netpoll_init+0x0/0x41()
initcall netpoll_init+0x0/0x41() returned 0 after 0 msecs
calling  netlink_proto_init+0x0/0x14d()
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x14d() returned 0 after 0 msecs
calling  bdi_class_init+0x0/0x3d()
initcall bdi_class_init+0x0/0x3d() returned 0 after 0 msecs
calling  kobject_uevent_init+0x0/0x45()
initcall kobject_uevent_init+0x0/0x45() returned 0 after 0 msecs
calling  pcibus_class_init+0x0/0x12()
initcall pcibus_class_init+0x0/0x12() returned 0 after 0 msecs
calling  pci_driver_init+0x0/0x12()
initcall pci_driver_init+0x0/0x12() returned 0 after 0 msecs
calling  lcd_class_init+0x0/0x49()
initcall lcd_class_init+0x0/0x49() returned 0 after 0 msecs
calling  tty_class_init+0x0/0x2a()
initcall tty_class_init+0x0/0x2a() returned 0 after 0 msecs
calling  vtconsole_class_init+0x0/0xb9()
PM: Adding info for No Bus:vtcon0
initcall vtconsole_class_init+0x0/0xb9() returned 0 after 3 msecs
calling  early_fill_mp_bus_info+0x0/0x7c2()
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [feb00000, fec0ffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fed3ffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [40000000, fcffffffff]
bus: 00 index 2 mmio: [feb00000, fec0ffff]
bus: 00 index 3 mmio: [a0000, bffff]
initcall early_fill_mp_bus_info+0x0/0x7c2() returned 0 after 34 msecs
calling  arch_kdebugfs_init+0x0/0x1f4()
initcall arch_kdebugfs_init+0x0/0x1f4() returned 0 after 0 msecs
calling  ffh_cstate_init+0x0/0x2c()
initcall ffh_cstate_init+0x0/0x2c() returned -1 after 0 msecs
initcall ffh_cstate_init+0x0/0x2c() returned with error code -1
calling  acpi_pci_init+0x0/0x45()
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x45() returned 0 after 3 msecs
calling  init_acpi_device_notify+0x0/0x4b()
initcall init_acpi_device_notify+0x0/0x4b() returned 0 after 0 msecs
calling  pci_access_init+0x0/0x40()
PCI: Using configuration type 1 for base access
initcall pci_access_init+0x0/0x40() returned 0 after 3 msecs
calling  topology_init+0x0/0x16()
initcall topology_init+0x0/0x16() returned 0 after 0 msecs
calling  param_sysfs_init+0x0/0x1d6()
initcall param_sysfs_init+0x0/0x1d6() returned 0 after 25 msecs
calling  pm_sysrq_init+0x0/0x19()
initcall pm_sysrq_init+0x0/0x19() returned 0 after 0 msecs
calling  readahead_init+0x0/0x38()
PM: Adding info for No Bus:default
initcall readahead_init+0x0/0x38() returned 0 after 3 msecs
calling  init_bio+0x0/0xc5()
initcall init_bio+0x0/0xc5() returned 0 after 0 msecs
calling  blk_settings_init+0x0/0x2a()
initcall blk_settings_init+0x0/0x2a() returned 0 after 0 msecs
calling  blk_ioc_init+0x0/0x2a()
initcall blk_ioc_init+0x0/0x2a() returned 0 after 0 msecs
calling  genhd_device_init+0x0/0x40()
initcall genhd_device_init+0x0/0x40() returned 0 after 0 msecs
calling  acpi_init+0x0/0x21c()
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
initcall acpi_init+0x0/0x21c() returned 0 after 38 msecs
calling  acpi_scan_init+0x0/0x110()
PM: Adding info for acpi:LNXSYSTM:00
PM: Adding info for acpi:LNXPWRBN:00
PM: Adding info for acpi:ACPI0007:00
PM: Adding info for acpi:ACPI0007:01
PM: Adding info for acpi:device:00
PM: Adding info for acpi:PNP0C0C:00
PM: Adding info for acpi:PNP0A08:00
PM: Adding info for acpi:PNP0C02:00
PM: Adding info for acpi:device:01
PM: Adding info for acpi:device:02
PM: Adding info for acpi:device:03
PM: Adding info for acpi:device:04
PM: Adding info for acpi:device:05
PM: Adding info for acpi:device:06
PM: Adding info for acpi:device:07
PM: Adding info for acpi:device:08
PM: Adding info for acpi:device:09
PM: Adding info for acpi:device:0a
PM: Adding info for acpi:device:0b
PM: Adding info for acpi:device:0c
PM: Adding info for acpi:device:0d
PM: Adding info for acpi:device:0e
PM: Adding info for acpi:device:0f
PM: Adding info for acpi:device:10
PM: Adding info for acpi:device:11
PM: Adding info for acpi:device:12
PM: Adding info for acpi:device:13
PM: Adding info for acpi:device:14
PM: Adding info for acpi:device:15
PM: Adding info for acpi:device:16
PM: Adding info for acpi:device:17
PM: Adding info for acpi:device:18
PM: Adding info for acpi:device:19
PM: Adding info for acpi:device:1a
PM: Adding info for acpi:device:1b
PM: Adding info for acpi:device:1c
PM: Adding info for acpi:device:1d
PM: Adding info for acpi:ATK0110:00
PM: Adding info for acpi:PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:04
PM: Adding info for acpi:PNP0C0F:05
PM: Adding info for acpi:PNP0C0F:06
PM: Adding info for acpi:PNP0C0F:07
PM: Adding info for acpi:PNP0C0F:08
PM: Adding info for acpi:PNP0C0F:09
PM: Adding info for acpi:PNP0C0F:0a
PM: Adding info for acpi:PNP0C0F:0b
PM: Adding info for acpi:PNP0C0F:0c
PM: Adding info for acpi:PNP0C0F:0d
PM: Adding info for acpi:PNP0C0F:0e
PM: Adding info for acpi:PNP0C0F:0f
PM: Adding info for acpi:PNP0C0F:10
PM: Adding info for acpi:PNP0C0F:11
PM: Adding info for acpi:PNP0C0F:12
PM: Adding info for acpi:PNP0C0F:13
PM: Adding info for acpi:PNP0C0F:14
PM: Adding info for acpi:PNP0C0F:15
PM: Adding info for acpi:PNP0C0F:16
PM: Adding info for acpi:PNP0C0F:17
PM: Adding info for acpi:PNP0C0F:18
PM: Adding info for acpi:PNP0C0F:19
PM: Adding info for acpi:PNP0C0F:1a
PM: Adding info for acpi:PNP0C0F:1b
PM: Adding info for acpi:PNP0C0F:1c
PM: Adding info for acpi:PNP0C0F:1d
PM: Adding info for acpi:PNP0C0F:1e
PM: Adding info for acpi:PNP0C0F:1f
PM: Adding info for acpi:PNP0C02:01
PM: Adding info for acpi:PNP0000:00
PM: Adding info for acpi:PNP0200:00
PM: Adding info for acpi:PNP0100:00
PM: Adding info for acpi:PNP0B00:00
PM: Adding info for acpi:PNP0800:00
PM: Adding info for acpi:PNP0C04:00
PM: Adding info for acpi:PNP0700:00
PM: Adding info for acpi:PNP0501:00
PM: Adding info for acpi:PNP0401:00
PM: Adding info for acpi:PNP0F13:00
PM: Adding info for acpi:PNP0303:00
PM: Adding info for acpi:PNPB006:00
PM: Adding info for acpi:PNPB02F:00
PM: Adding info for acpi:PNP0C02:02
PM: Adding info for acpi:PNP0C01:00
PM: Adding info for acpi:LNXTHERM:00
PM: Adding info for acpi:PNP0C0B:00
PM: Adding info for acpi:LNXTHERM:01
initcall acpi_scan_init+0x0/0x110() returned 0 after 298 msecs
calling  acpi_ec_init+0x0/0x61()
initcall acpi_ec_init+0x0/0x61() returned 0 after 3 msecs
calling  acpi_pci_root_init+0x0/0x28()
ACPI: PCI Root Bridge [PCI0] (0000:00)
PM: Adding info for No Bus:pci0000:00
PM: Adding info for No Bus:0000:00
PCI: Transparent bridge - 0000:00:09.0
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:01.1
PM: Adding info for pci:0000:00:02.0
PM: Adding info for pci:0000:00:02.1
PM: Adding info for pci:0000:00:04.0
PM: Adding info for pci:0000:00:06.0
PM: Adding info for pci:0000:00:09.0
PM: Adding info for pci:0000:00:0a.0
PM: Adding info for pci:0000:00:0b.0
PM: Adding info for pci:0000:00:0c.0
PM: Adding info for pci:0000:00:0d.0
PM: Adding info for pci:0000:00:0e.0
PM: Adding info for pci:0000:00:18.0
PM: Adding info for pci:0000:00:18.1
PM: Adding info for pci:0000:00:18.2
PM: Adding info for pci:0000:00:18.3
PM: Adding info for pci:0000:05:07.0
PM: Adding info for No Bus:0000:05
PM: Adding info for No Bus:0000:04
PM: Adding info for No Bus:0000:03
PM: Adding info for No Bus:0000:02
PM: Adding info for pci:0000:01:00.0
PM: Adding info for pci:0000:01:00.1
PM: Adding info for No Bus:0000:01
initcall acpi_pci_root_init+0x0/0x28() returned 0 after 216 msecs
calling  acpi_pci_link_init+0x0/0x48()
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
initcall acpi_pci_link_init+0x0/0x48() returned 0 after 197 msecs
calling  acpi_power_init+0x0/0x77()
initcall acpi_power_init+0x0/0x77() returned 0 after 0 msecs
calling  acpi_system_init+0x0/0x1b0()
initcall acpi_system_init+0x0/0x1b0() returned 0 after 0 msecs
calling  acpi_wmi_init+0x0/0x4f()
ACPI: WMI: Mapper loaded
initcall acpi_wmi_init+0x0/0x4f() returned 0 after 3 msecs
calling  acpi_cm_sbs_init+0x0/0x8()
initcall acpi_cm_sbs_init+0x0/0x8() returned 0 after 0 msecs
calling  pnp_init+0x0/0x20()
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall pnp_init+0x0/0x20() returned 0 after 3 msecs
calling  pnpacpi_init+0x0/0x8c()
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
ACPI: bus type pnp registered
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
PM: Adding info for pnp:00:06
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
PM: Adding info for pnp:00:07
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
PM: Adding info for pnp:00:08
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
PM: Adding info for pnp:00:09
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
PM: Adding info for pnp:00:0a
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
PM: Adding info for pnp:00:0b
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
PM: Adding info for pnp:00:0c
PM: Adding info for pnp:00:0d
PM: Adding info for pnp:00:0e
PM: Adding info for pnp:00:0f
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c() returned 0 after 98 msecs
calling  misc_init+0x0/0x98()
initcall misc_init+0x0/0x98() returned 0 after 0 msecs
calling  cn_init+0x0/0xcb()
initcall cn_init+0x0/0xcb() returned 0 after 0 msecs
calling  tifm_init+0x0/0x7c()
initcall tifm_init+0x0/0x7c() returned 0 after 0 msecs
calling  phy_init+0x0/0x31()
initcall phy_init+0x0/0x31() returned 0 after 0 msecs
calling  init_scsi+0x0/0x71()
SCSI subsystem initialized
initcall init_scsi+0x0/0x71() returned 0 after 3 msecs
calling  ata_init+0x0/0x34b()
libata version 3.00 loaded.
initcall ata_init+0x0/0x34b() returned 0 after 0 msecs
calling  spi_init+0x0/0x7c()
initcall spi_init+0x0/0x7c() returned 0 after 0 msecs
calling  usb_init+0x0/0x127()
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x127() returned 0 after 9 msecs
calling  serio_init+0x0/0x98()
initcall serio_init+0x0/0x98() returned 0 after 0 msecs
calling  gameport_init+0x0/0x99()
initcall gameport_init+0x0/0x99() returned 0 after 0 msecs
calling  input_init+0x0/0x107()
initcall input_init+0x0/0x107() returned 0 after 0 msecs
calling  rtc_init+0x0/0x6b()
initcall rtc_init+0x0/0x6b() returned 0 after 0 msecs
calling  hwmon_init+0x0/0x3b()
initcall hwmon_init+0x0/0x3b() returned 0 after 0 msecs
calling  thermal_init+0x0/0x51()
initcall thermal_init+0x0/0x51() returned 0 after 0 msecs
calling  mmc_init+0x0/0x74()
initcall mmc_init+0x0/0x74() returned 0 after 0 msecs
calling  leds_init+0x0/0x2a()
initcall leds_init+0x0/0x2a() returned 0 after 0 msecs
calling  dma_bus_init+0x0/0x2c()
initcall dma_bus_init+0x0/0x2c() returned 0 after 0 msecs
calling  pci_acpi_init+0x0/0x96()
PCI: Using ACPI for IRQ routing
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 00000000
.......    : physical APIC id: 00
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:   
 00 001 0    0    0   0   0    1    1    30
 01 001 0    0    0   0   0    1    1    31
 02 001 0    0    0   0   0    1    1    32
 03 001 1    0    0   0   0    1    1    33
 04 001 0    0    0   0   0    1    1    34
 05 001 1    0    0   0   0    1    1    35
 06 001 0    0    0   0   0    1    1    36
 07 001 0    0    0   0   0    1    1    37
 08 001 0    0    0   0   0    1    1    38
 09 001 0    1    0   0   0    1    1    39
 0a 001 0    0    0   0   0    1    1    3A
 0b 001 1    0    0   0   0    1    1    3B
 0c 001 0    0    0   0   0    1    1    3C
 0d 001 0    0    0   0   0    1    1    3D
 0e 001 0    0    0   0   0    1    1    3E
 0f 001 0    0    0   0   0    1    1    3F
 10 000 1    0    0   0   0    0    0    00
 11 000 1    0    0   0   0    0    0    00
 12 000 1    0    0   0   0    0    0    00
 13 000 1    0    0   0   0    0    0    00
 14 000 1    0    0   0   0    0    0    00
 15 000 1    0    0   0   0    0    0    00
 16 000 1    0    0   0   0    0    0    00
 17 000 1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
initcall pci_acpi_init+0x0/0x96() returned 0 after 155 msecs
calling  pci_legacy_init+0x0/0x10c()
initcall pci_legacy_init+0x0/0x10c() returned 0 after 0 msecs
calling  pcibios_irq_init+0x0/0x498()
initcall pcibios_irq_init+0x0/0x498() returned 0 after 0 msecs
calling  pcibios_init+0x0/0x6a()
initcall pcibios_init+0x0/0x6a() returned 0 after 0 msecs
calling  proto_init+0x0/0x2e()
initcall proto_init+0x0/0x2e() returned 0 after 0 msecs
calling  net_dev_init+0x0/0x134()
initcall net_dev_init+0x0/0x134() returned 0 after 0 msecs
calling  neigh_init+0x0/0x71()
initcall neigh_init+0x0/0x71() returned 0 after 0 msecs
calling  genl_init+0x0/0xd5()
initcall genl_init+0x0/0xd5() returned 0 after 12 msecs
calling  irda_init+0x0/0x82()
NET: Registered protocol family 23
initcall irda_init+0x0/0x82() returned 0 after 3 msecs
calling  wireless_nlevent_init+0x0/0x41()
initcall wireless_nlevent_init+0x0/0x41() returned 0 after 0 msecs
calling  cfg80211_init+0x0/0x5f()
initcall cfg80211_init+0x0/0x5f() returned 0 after 9 msecs
calling  ieee80211_init+0x0/0x1f()
initcall ieee80211_init+0x0/0x1f() returned 0 after 0 msecs
calling  rfkill_init+0x0/0x57()
initcall rfkill_init+0x0/0x57() returned 0 after 3 msecs
calling  pci_iommu_init+0x0/0x17()
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
initcall pci_iommu_init+0x0/0x17() returned 0 after 12 msecs
calling  hpet_late_init+0x0/0x4d()
initcall hpet_late_init+0x0/0x4d() returned -19 after 0 msecs
calling  init_kmmio+0x0/0x2c()
initcall init_kmmio+0x0/0x2c() returned 0 after 0 msecs
calling  clocksource_done_booting+0x0/0x12()
initcall clocksource_done_booting+0x0/0x12() returned 0 after 0 msecs
calling  tracer_alloc_buffers+0x0/0x422()
tracer: 898 pages allocated for 65536<6> entries of 56 bytes
   actual entries 65554
initcall tracer_alloc_buffers+0x0/0x422() returned 0 after 8 msecs
calling  init_pipe_fs+0x0/0x4c()
initcall init_pipe_fs+0x0/0x4c() returned 0 after 0 msecs
calling  init_mnt_writers+0x0/0x49()
initcall init_mnt_writers+0x0/0x49() returned 0 after 0 msecs
calling  eventpoll_init+0x0/0x95()
initcall eventpoll_init+0x0/0x95() returned 0 after 0 msecs
calling  anon_inode_init+0x0/0x115()
initcall anon_inode_init+0x0/0x115() returned 0 after 0 msecs
calling  acpi_rtc_init+0x0/0xd1()
ACPI: RTC can wake from S4
initcall acpi_rtc_init+0x0/0xd1() returned 0 after 2 msecs
calling  acpi_event_init+0x0/0x52()
initcall acpi_event_init+0x0/0x52() returned 0 after 12 msecs
calling  pnp_system_init+0x0/0x12()
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x805 has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0f: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0f: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0f: iomem range 0xfc000-0xfffff could not be reserved
system 00:0f: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:0f: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0x100000-0x3ffeffff could not be reserved
system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0f: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0f: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0f: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0f: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0f: iomem range 0xfffed000-0xfffeffff could not be reserved
initcall pnp_system_init+0x0/0x12() returned 0 after 130 msecs
calling  chr_dev_init+0x0/0xa7()
PM: Adding info for No Bus:mem
PM: Adding info for No Bus:kmem
PM: Adding info for No Bus:null
PM: Adding info for No Bus:port
PM: Adding info for No Bus:zero
PM: Adding info for No Bus:full
PM: Adding info for No Bus:random
PM: Adding info for No Bus:urandom
PM: Adding info for No Bus:kmsg
PM: Adding info for No Bus:oldmem
initcall chr_dev_init+0x0/0xa7() returned 0 after 29 msecs
calling  firmware_class_init+0x0/0x72()
initcall firmware_class_init+0x0/0x72() returned 0 after 0 msecs
calling  loopback_init+0x0/0x12()
PM: Adding info for No Bus:lo
initcall loopback_init+0x0/0x12() returned 0 after 2 msecs
calling  cpufreq_gov_performance_init+0x0/0x12()
initcall cpufreq_gov_performance_init+0x0/0x12() returned 0 after 0 msecs
calling  cpufreq_gov_dbs_init+0x0/0x4b()
initcall cpufreq_gov_dbs_init+0x0/0x4b() returned 0 after 0 msecs
calling  ssb_modinit+0x0/0x61()
initcall ssb_modinit+0x0/0x61() returned 0 after 0 msecs
calling  pcibios_assign_resources+0x0/0x88()
PCI: Bridge: 0000:00:09.0
  IO window: c000-cfff
  MEM window: 0xda000000-0xda0fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
  IO window: b000-bfff
  MEM window: 0xd8000000-0xd9ffffff
  PREFETCH window: 0x00000000d0000000-0x00000000d7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
initcall pcibios_assign_resources+0x0/0x88() returned 0 after 72 msecs
calling  inet_init+0x0/0x2fb()
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x2fb() returned 0 after 71 msecs
calling  af_unix_init+0x0/0x55()
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55() returned 0 after 2 msecs
calling  default_rootfs+0x0/0x6b()
initcall default_rootfs+0x0/0x6b() returned 0 after 0 msecs
calling  calgary_fixup_tce_spaces+0x0/0xf3()
initcall calgary_fixup_tce_spaces+0x0/0xf3() returned -19 after 0 msecs
calling  i8259A_init_sysfs+0x0/0x22()
initcall i8259A_init_sysfs+0x0/0x22() returned 0 after 0 msecs
calling  vsyscall_init+0x0/0x50()
initcall vsyscall_init+0x0/0x50() returned 0 after 0 msecs
calling  sbf_init+0x0/0xd5()
initcall sbf_init+0x0/0xd5() returned 0 after 0 msecs
calling  i8237A_init_sysfs+0x0/0x22()
initcall i8237A_init_sysfs+0x0/0x22() returned 0 after 0 msecs
calling  cache_sysfs_init+0x0/0x21f()
initcall cache_sysfs_init+0x0/0x21f() returned 0 after 0 msecs
calling  mce_init_device+0x0/0x10b()
PM: Adding info for No Bus:mcelog
initcall mce_init_device+0x0/0x10b() returned 0 after 3 msecs
calling  periodic_mcheck_init+0x0/0x3f()
initcall periodic_mcheck_init+0x0/0x3f() returned 0 after 0 msecs
calling  thermal_throttle_init_device+0x0/0x28()
initcall thermal_throttle_init_device+0x0/0x28() returned 0 after 0 msecs
calling  threshold_init_device+0x0/0xf3()
initcall threshold_init_device+0x0/0xf3() returned 0 after 0 msecs
calling  cpuid_init+0x0/0xb9()
PM: Adding info for No Bus:cpu0
initcall cpuid_init+0x0/0xb9() returned 0 after 3 msecs
calling  init_lapic_sysfs+0x0/0x2d()
initcall init_lapic_sysfs+0x0/0x2d() returned 0 after 0 msecs
calling  ioapic_init_sysfs+0x0/0x99()
initcall ioapic_init_sysfs+0x0/0x99() returned 0 after 0 msecs
calling  add_pcspkr+0x0/0x43()
PM: Adding info for platform:pcspkr
initcall add_pcspkr+0x0/0x43() returned 0 after 3 msecs
calling  debug_pagealloc_proc_init+0x0/0x2b()
initcall debug_pagealloc_proc_init+0x0/0x2b() returned 0 after 0 msecs
calling  init+0x0/0x12()
initcall init+0x0/0x12() returned 0 after 0 msecs
calling  init_vdso_vars+0x0/0x1f8()
initcall init_vdso_vars+0x0/0x1f8() returned 0 after 0 msecs
calling  sysenter_setup+0x0/0x26a()
initcall sysenter_setup+0x0/0x26a() returned 0 after 0 msecs
calling  init_aout_binfmt+0x0/0x12()
initcall init_aout_binfmt+0x0/0x12() returned 0 after 0 msecs
calling  init_sched_debug_procfs+0x0/0x2c()
initcall init_sched_debug_procfs+0x0/0x2c()<4>Clocksource tsc unstable (delta = 76534833 ns)
 returned 0 after 0 msecs
calling  create_proc_profile+0x0/0x48()
initcall create_proc_profile+0x0/0x48() returned 0 after 0 msecs
calling  ioresources_init+0x0/0x3c()
initcall ioresources_init+0x0/0x3c() returned 0 after 0 msecs
calling  uid_cache_init+0x0/0x6c()
initcall uid_cache_init+0x0/0x6c() returned 0 after 0 msecs
calling  init_posix_timers+0x0/0xb6()
initcall init_posix_timers+0x0/0xb6() returned 0 after 0 msecs
calling  init_posix_cpu_timers+0x0/0xd4()
initcall init_posix_cpu_timers+0x0/0xd4() returned 0 after 0 msecs
calling  nsproxy_cache_init+0x0/0x2d()
initcall nsproxy_cache_init+0x0/0x2d() returned 0 after 0 msecs
calling  timekeeping_init_device+0x0/0x22()
initcall timekeeping_init_device+0x0/0x22() returned 0 after 0 msecs
calling  init_clocksource_sysfs+0x0/0x50()
initcall init_clocksource_sysfs+0x0/0x50() returned 0 after 0 msecs
calling  init_timer_list_procfs+0x0/0x2c()
initcall init_timer_list_procfs+0x0/0x2c() returned 0 after 0 msecs
calling  lockdep_proc_init+0x0/0x42()
initcall lockdep_proc_init+0x0/0x42() returned 0 after 0 msecs
calling  futex_init+0x0/0x93()
initcall futex_init+0x0/0x93() returned 0 after 0 msecs
calling  init_rttest+0x0/0x15f()
Initializing RT-Tester: OK
initcall init_rttest+0x0/0x15f() returned 0 after 3 msecs
calling  proc_dma_init+0x0/0x22()
initcall proc_dma_init+0x0/0x22() returned 0 after 0 msecs
calling  kallsyms_init+0x0/0x25()
initcall kallsyms_init+0x0/0x25() returned 0 after 0 msecs
calling  snapshot_device_init+0x0/0x12()
PM: Adding info for No Bus:snapshot
initcall snapshot_device_init+0x0/0x12() returned 0 after 3 msecs
calling  backtrace_regression_test+0x0/0x7f()
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
Pid: 1, comm: swapper Not tainted 2.6.26-rc1-sched-devel.git-x86-latest.git #76

Call Trace:
 [<ffffffff80253494>] backtrace_regression_test+0x33/0x7f
 [<ffffffff80c0788e>] kernel_init+0xa1/0x1de
 [<ffffffff80826994>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8024894c>] ? trace_hardirqs_on_caller+0xc3/0xed
 [<ffffffff8020bff8>] child_rip+0xa/0x12
 [<ffffffff8020ba8c>] ? restore_args+0x0/0x30
 [<ffffffff80c077ed>] ? kernel_init+0x0/0x1de
 [<ffffffff8020bfee>] ? child_rip+0x0/0x12

====[ end of backtrace testing ]====
initcall backtrace_regression_test+0x0/0x7f() returned 0 after 50 msecs
calling  init_lstats_procfs+0x0/0x25()
initcall init_lstats_procfs+0x0/0x25() returned 0 after 0 msecs
calling  init_sched_switch_trace+0x0/0x41()
Testing tracer sched_switch: Testing a backtrace from irq context.
The following trace is a kernel self test and not a bug!
Pid: 1, comm: swapper Not tainted 2.6.26-rc1-sched-devel.git-x86-latest.git #76

Call Trace:
 <IRQ>  [<ffffffff80248983>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff8025345f>] backtrace_test_timer+0x25/0x27
 [<ffffffff80234d06>] run_timer_softirq+0x157/0x1c0
 [<ffffffff80232ab7>] __do_softirq+0x86/0x113
 [<ffffffff8020c3bc>] call_softirq+0x1c/0x28
 [<ffffffff8020e018>] do_softirq+0x49/0x9b
 [<ffffffff802329f5>] irq_exit+0x4e/0x8a
 [<ffffffff802188f7>] smp_apic_timer_interrupt+0x72/0x7d
 [<ffffffff8022e3cd>] ? release_console_sem+0x1b5/0x1cd
 [<ffffffff8020bdc7>] apic_timer_interrupt+0x77/0x80
 <EOI>  [<ffffffff80241dbe>] ? up+0xf/0x39
 [<ffffffff8022e3cd>] ? release_console_sem+0x1b5/0x1cd
 [<ffffffff8022e8df>] ? vprintk+0x327/0x342
 [<ffffffff8022e8df>] ? vprintk+0x327/0x342
 [<ffffffff8022e98b>] ? printk+0x91/0x9d
 [<ffffffff80249979>] ? __lock_acquire+0xb65/0xb86
 [<ffffffff8022e98b>] ? printk+0x91/0x9d
 [<ffffffff80248983>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff808257d3>] ? mutex_lock_nested+0x1ea/0x1f9
 [<ffffffff80241dbe>] ? up+0xf/0x39
 [<ffffffff8025a3e8>] ? head_page+0xd/0x4c
 [<ffffffff8025b2f2>] ? register_tracer+0xd2/0x188
 [<ffffffff80c13d3f>] ? init_sched_switch_trace+0x39/0x41
 [<ffffffff80c0788e>] ? kernel_init+0xa1/0x1de
 [<ffffffff80826994>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8024894c>] ? trace_hardirqs_on_caller+0xc3/0xed
 [<ffffffff8020bff8>] ? child_rip+0xa/0x12
 [<ffffffff8020ba8c>] ? restore_args+0x0/0x30
 [<ffffffff80c077ed>] ? kernel_init+0x0/0x1de
 [<ffffffff8020bfee>] ? child_rip+0x0/0x12

PASSED
initcall init_sched_switch_trace+0x0/0x41() returned 0 after 235 msecs
calling  init_stack_trace+0x0/0x12()
Testing tracer sysprof: PASSED
initcall init_stack_trace+0x0/0x12() returned 0 after 98 msecs
calling  init_mmio_trace+0x0/0x12()
initcall init_mmio_trace+0x0/0x12() returned 0 after 0 msecs
calling  init_per_zone_pages_min+0x0/0x45()
initcall init_per_zone_pages_min+0x0/0x45() returned 0 after 0 msecs
calling  pdflush_init+0x0/0x1d()
initcall pdflush_init+0x0/0x1d() returned 0 after 0 msecs
calling  kswapd_init+0x0/0x14()
initcall kswapd_init+0x0/0x14() returned 0 after 0 msecs
calling  procswaps_init+0x0/0x22()
initcall procswaps_init+0x0/0x22() returned 0 after 0 msecs
calling  init_tmpfs+0x0/0xda()
initcall init_tmpfs+0x0/0xda() returned 0 after 0 msecs
calling  cpucache_init+0x0/0xf()
initcall cpucache_init+0x0/0xf() returned 0 after 0 msecs
calling  fasync_init+0x0/0x2a()
initcall fasync_init+0x0/0x2a() returned 0 after 0 msecs
calling  aio_setup+0x0/0x73()
initcall aio_setup+0x0/0x73() returned 0 after 0 msecs
calling  inotify_setup+0x0/0x12()
initcall inotify_setup+0x0/0x12() returned 0 after 0 msecs
calling  init_sys32_ioctl+0x0/0x85()
initcall init_sys32_ioctl+0x0/0x85() returned 0 after 0 msecs
calling  init_mbcache+0x0/0x14()
initcall init_mbcache+0x0/0x14() returned 0 after 0 msecs
calling  dquot_init+0x0/0xde()
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xde() returned 0 after 6 msecs
calling  init_v2_quota_format+0x0/0x12()
initcall init_v2_quota_format+0x0/0x12() returned 0 after 0 msecs
calling  configfs_init+0x0/0xb3()
initcall configfs_init+0x0/0xb3() returned 0 after 0 msecs
calling  init_devpts_fs+0x0/0x3f()
initcall init_devpts_fs+0x0/0x3f() returned 0 after 0 msecs
calling  init_dlm+0x0/0x88()
PM: Adding info for No Bus:dlm-control
PM: Adding info for No Bus:dlm_plock
DLM (built May  7 2008 16:17:51) installed
initcall init_dlm+0x0/0x88() returned 0 after 9 msecs
calling  init_ext3_fs+0x0/0x6a()
initcall init_ext3_fs+0x0/0x6a() returned 0 after 0 msecs
calling  journal_init+0x0/0xc1()
initcall journal_init+0x0/0xc1() returned 0 after 0 msecs
calling  init_ramfs_fs+0x0/0x12()
initcall init_ramfs_fs+0x0/0x12() returned 0 after 0 msecs
calling  init_coda+0x0/0x133()
PM: Adding info for No Bus:cfs0
PM: Adding info for No Bus:cfs1
PM: Adding info for No Bus:cfs2
PM: Adding info for No Bus:cfs3
PM: Adding info for No Bus:cfs4
initcall init_coda+0x0/0x133() returned 0 after 15 msecs
calling  init_minix_fs+0x0/0x5a()
initcall init_minix_fs+0x0/0x5a() returned 0 after 0 msecs
calling  init_fat_fs+0x0/0x4f()
initcall init_fat_fs+0x0/0x4f() returned 0 after 0 msecs
calling  init_msdos_fs+0x0/0x12()
initcall init_msdos_fs+0x0/0x12() returned 0 after 0 msecs
calling  init_vfat_fs+0x0/0x12()
initcall init_vfat_fs+0x0/0x12() returned 0 after 0 msecs
calling  init_iso9660_fs+0x0/0x5a()
initcall init_iso9660_fs+0x0/0x5a() returned 0 after 0 msecs
calling  init_hfsplus_fs+0x0/0x5d()
initcall init_hfsplus_fs+0x0/0x5d() returned 0 after 0 msecs
calling  init_hfs_fs+0x0/0x5d()
initcall init_hfs_fs+0x0/0x5d() returned 0 after 0 msecs
calling  ecryptfs_init+0x0/0x1c5()
PM: Adding info for No Bus:ecryptfs
initcall ecryptfs_init+0x0/0x1c5() returned 0 after 3 msecs
calling  vxfs_init+0x0/0x59()
initcall vxfs_init+0x0/0x59() returned 0 after 0 msecs
calling  init_nfs_fs+0x0/0xfc()
initcall init_nfs_fs+0x0/0xfc() returned 0 after 3 msecs
calling  init_nlm+0x0/0x8()
initcall init_nlm+0x0/0x8() returned 0 after 0 msecs
calling  init_nls_cp737+0x0/0x12()
initcall init_nls_cp737+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_cp857+0x0/0x12()
initcall init_nls_cp857+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_cp861+0x0/0x12()
initcall init_nls_cp861+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_cp862+0x0/0x12()
initcall init_nls_cp862+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_cp864+0x0/0x12()
initcall init_nls_cp864+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_cp932+0x0/0x12()
initcall init_nls_cp932+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_euc_jp+0x0/0x48()
initcall init_nls_euc_jp+0x0/0x48() returned 0 after 0 msecs
calling  init_nls_cp936+0x0/0x12()
initcall init_nls_cp936+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_cp949+0x0/0x12()
initcall init_nls_cp949+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_cp950+0x0/0x12()
initcall init_nls_cp950+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_cp1251+0x0/0x12()
initcall init_nls_cp1251+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_iso8859_1+0x0/0x12()
initcall init_nls_iso8859_1+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_iso8859_2+0x0/0x12()
initcall init_nls_iso8859_2+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_iso8859_3+0x0/0x12()
initcall init_nls_iso8859_3+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_iso8859_5+0x0/0x12()
initcall init_nls_iso8859_5+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_iso8859_6+0x0/0x12()
initcall init_nls_iso8859_6+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_cp1255+0x0/0x12()
initcall init_nls_cp1255+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_iso8859_15+0x0/0x12()
initcall init_nls_iso8859_15+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_koi8_r+0x0/0x12()
initcall init_nls_koi8_r+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_koi8_u+0x0/0x12()
initcall init_nls_koi8_u+0x0/0x12() returned 0 after 0 msecs
calling  init_nls_koi8_ru+0x0/0x48()
initcall init_nls_koi8_ru+0x0/0x48() returned 0 after 0 msecs
calling  init_nls_utf8+0x0/0x25()
initcall init_nls_utf8+0x0/0x25() returned 0 after 0 msecs
calling  init_ncp_fs+0x0/0x5a()
initcall init_ncp_fs+0x0/0x5a() returned 0 after 0 msecs
calling  init_hpfs_fs+0x0/0x5a()
initcall init_hpfs_fs+0x0/0x5a() returned 0 after 0 msecs
calling  init_ntfs_fs+0x0/0x1d1()
NTFS driver 2.1.29 [Flags: R/W].
initcall init_ntfs_fs+0x0/0x1d1() returned 0 after 3 msecs
calling  init_affs_fs+0x0/0x5a()
initcall init_affs_fs+0x0/0x5a() returned 0 after 0 msecs
calling  init_romfs_fs+0x0/0x5a()
initcall init_romfs_fs+0x0/0x5a() returned 0 after 0 msecs
calling  init_qnx4_fs+0x0/0x6c()
QNX4 filesystem 0.2.3 registered.
initcall init_qnx4_fs+0x0/0x6c() returned 0 after 3 msecs
calling  init_autofs_fs+0x0/0x12()
initcall init_autofs_fs+0x0/0x12() returned 0 after 0 msecs
calling  init_autofs4_fs+0x0/0x12()
initcall init_autofs4_fs+0x0/0x12() returned -16 after 0 msecs
initcall init_autofs4_fs+0x0/0x12() returned with error code -16
calling  init_udf_fs+0x0/0x5b()
initcall init_udf_fs+0x0/0x5b() returned 0 after 0 msecs
calling  init_jfs_fs+0x0/0x264()
JFS: nTxBlock = 7223, nTxLock = 57789
initcall init_jfs_fs+0x0/0x264() returned 0 after 9 msecs
calling  init_v9fs+0x0/0x20()
Installing v9fs 9p2000 file system support
initcall init_v9fs+0x0/0x20() returned 0 after 3 msecs
calling  init_befs_fs+0x0/0x7b()
BeFS version: 0.9.3
initcall init_befs_fs+0x0/0x7b() returned 0 after 0 msecs
calling  ipc_init+0x0/0x23()
msgmni has been set to 1805 for ipc namespace ffffffff80b33740
initcall ipc_init+0x0/0x23() returned 0 after 3 msecs
calling  init_mqueue_fs+0x0/0xd7()
initcall init_mqueue_fs+0x0/0xd7() returned 0 after 0 msecs
calling  key_proc_init+0x0/0x59()
initcall key_proc_init+0x0/0x59() returned 0 after 0 msecs
calling  crypto_algapi_init+0x0/0xd()
initcall crypto_algapi_init+0x0/0xd() returned 0 after 0 msecs
calling  blkcipher_module_init+0x0/0x2a()
initcall blkcipher_module_init+0x0/0x2a() returned 0 after 0 msecs
calling  seqiv_module_init+0x0/0x12()
initcall seqiv_module_init+0x0/0x12() returned 0 after 0 msecs
calling  cryptomgr_init+0x0/0x12()
initcall cryptomgr_init+0x0/0x12() returned 0 after 0 msecs
calling  hmac_module_init+0x0/0x12()
initcall hmac_module_init+0x0/0x12() returned 0 after 0 msecs
calling  crypto_null_mod_init+0x0/0x7b()
initcall crypto_null_mod_init+0x0/0x7b() returned 0 after 0 msecs
calling  md4_mod_init+0x0/0x12()
initcall md4_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  md5_mod_init+0x0/0x12()
initcall md5_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  sha1_generic_mod_init+0x0/0x12()
initcall sha1_generic_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  sha256_generic_mod_init+0x0/0x3f()
initcall sha256_generic_mod_init+0x0/0x3f() returned 0 after 0 msecs
calling  wp512_mod_init+0x0/0x64()
initcall wp512_mod_init+0x0/0x64() returned 0 after 0 msecs
calling  crypto_ecb_module_init+0x0/0x12()
initcall crypto_ecb_module_init+0x0/0x12() returned 0 after 0 msecs
calling  crypto_cbc_module_init+0x0/0x12()
initcall crypto_cbc_module_init+0x0/0x12() returned 0 after 0 msecs
calling  crypto_module_init+0x0/0x12()
initcall crypto_module_init+0x0/0x12() returned 0 after 0 msecs
calling  crypto_ctr_module_init+0x0/0x3f()
initcall crypto_ctr_module_init+0x0/0x3f() returned 0 after 0 msecs
calling  crypto_gcm_module_init+0x0/0x5d()
initcall crypto_gcm_module_init+0x0/0x5d() returned 0 after 0 msecs
calling  des_generic_mod_init+0x0/0x3f()
initcall des_generic_mod_init+0x0/0x3f() returned 0 after 0 msecs
calling  blowfish_mod_init+0x0/0x12()
initcall blowfish_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  aes_init+0x0/0x2ce()
initcall aes_init+0x0/0x2ce() returned 0 after 0 msecs
calling  cast5_mod_init+0x0/0x12()
initcall cast5_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  arc4_init+0x0/0x12()
initcall arc4_init+0x0/0x12() returned 0 after 0 msecs
calling  tea_mod_init+0x0/0x64()
initcall tea_mod_init+0x0/0x64() returned 0 after 0 msecs
calling  anubis_mod_init+0x0/0x12()
initcall anubis_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  salsa20_generic_mod_init+0x0/0x12()
initcall salsa20_generic_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  deflate_mod_init+0x0/0x12()
initcall deflate_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  michael_mic_init+0x0/0x12()
initcall michael_mic_init+0x0/0x12() returned 0 after 0 msecs
calling  crc32c_mod_init+0x0/0x12()
initcall crc32c_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  crypto_authenc_module_init+0x0/0x12()
initcall crypto_authenc_module_init+0x0/0x12() returned 0 after 0 msecs
calling  lzo_mod_init+0x0/0x12()
initcall lzo_mod_init+0x0/0x12() returned 0 after 0 msecs
calling  noop_init+0x0/0x14()
io scheduler noop registered (default)
initcall noop_init+0x0/0x14() returned 0 after 3 msecs
calling  debug_objects_init_debugfs+0x0/0x64()
initcall debug_objects_init_debugfs+0x0/0x64() returned 0 after 0 msecs
calling  init_kmp+0x0/0x12()
initcall init_kmp+0x0/0x12() returned 0 after 0 msecs
calling  init_bm+0x0/0x12()
initcall init_bm+0x0/0x12() returned 0 after 0 msecs
calling  init_fsm+0x0/0x12()
initcall init_fsm+0x0/0x12() returned 0 after 0 msecs
calling  pci_init+0x0/0x35()
pci 0000:01:00.0: Boot video device
initcall pci_init+0x0/0x35() returned 0 after 12 msecs
calling  pci_proc_init+0x0/0x6a()
initcall pci_proc_init+0x0/0x6a() returned 0 after 0 msecs
calling  pcie_portdrv_init+0x0/0x4d()
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PM: Adding info for pci_express:0000:00:0b.0:pcie00
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PM: Adding info for pci_express:0000:00:0c.0:pcie00
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PM: Adding info for pci_express:0000:00:0d.0:pcie00
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PM: Adding info for pci_express:0000:00:0e.0:pcie00
initcall pcie_portdrv_init+0x0/0x4d() returned 0 after 54 msecs
calling  ltv350qv_init+0x0/0x12()
initcall ltv350qv_init+0x0/0x12() returned 0 after 0 msecs
calling  display_class_init+0x0/0x80()
initcall display_class_init+0x0/0x80() returned 0 after 0 msecs
calling  acpi_reserve_resources+0x0/0xeb()
initcall acpi_reserve_resources+0x0/0xeb() returned 0 after 0 msecs
calling  acpi_battery_init+0x0/0x45()
initcall acpi_battery_init+0x0/0x45() returned 0 after 0 msecs
calling  acpi_button_init+0x0/0x5e()
PM: Adding info for No Bus:input0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
PM: Adding info for No Bus:input1
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
initcall acpi_button_init+0x0/0x5e() returned 0 after 19 msecs
calling  irqrouter_init_sysfs+0x0/0x38()
initcall irqrouter_init_sysfs+0x0/0x38() returned 0 after 0 msecs
calling  acpi_processor_init+0x0/0x8b()
PM: Adding info for No Bus:cooling_device0
ACPI: ACPI0007:00 is registered as cooling_device0
initcall acpi_processor_init+0x0/0x8b() returned 0 after 6 msecs
calling  acpi_thermal_init+0x0/0x77()
PM: Adding info for No Bus:thermal_zone0
PM: Adding info for No Bus:hwmon0
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
initcall acpi_thermal_init+0x0/0x77() returned 0 after 12 msecs
calling  rand_initialize+0x0/0x2c()
initcall rand_initialize+0x0/0x2c() returned 0 after 0 msecs
calling  tty_init+0x0/0x1c5()
PM: Adding info for No Bus:tty
PM: Adding info for No Bus:console
PM: Adding info for No Bus:ptmx
PM: Adding info for No Bus:tty0
PM: Adding info for No Bus:vcs
PM: Adding info for No Bus:vcsa
PM: Adding info for No Bus:tty1
PM: Adding info for No Bus:tty2
PM: Adding info for No Bus:tty3
PM: Adding info for No Bus:tty4
PM: Adding info for No Bus:tty5
PM: Adding info for No Bus:tty6
PM: Adding info for No Bus:tty7
PM: Adding info for No Bus:tty8
PM: Adding info for No Bus:tty9
PM: Adding info for No Bus:tty10
PM: Adding info for No Bus:tty11
PM: Adding info for No Bus:tty12
PM: Adding info for No Bus:tty13
PM: Adding info for No Bus:tty14
PM: Adding info for No Bus:tty15
PM: Adding info for No Bus:tty16
PM: Adding info for No Bus:tty17
PM: Adding info for No Bus:tty18
PM: Adding info for No Bus:tty19
PM: Adding info for No Bus:tty20
PM: Adding info for No Bus:tty21
PM: Adding info for No Bus:tty22
PM: Adding info for No Bus:tty23
PM: Adding info for No Bus:tty24
PM: Adding info for No Bus:tty25
PM: Adding info for No Bus:tty26
PM: Adding info for No Bus:tty27
PM: Adding info for No Bus:tty28
PM: Adding info for No Bus:tty29
PM: Adding info for No Bus:tty30
PM: Adding info for No Bus:tty31
PM: Adding info for No Bus:tty32
PM: Adding info for No Bus:tty33
PM: Adding info for No Bus:tty34
PM: Adding info for No Bus:tty35
PM: Adding info for No Bus:tty36
PM: Adding info for No Bus:tty37
PM: Adding info for No Bus:tty38
PM: Adding info for No Bus:tty39
PM: Adding info for No Bus:tty40
PM: Adding info for No Bus:tty41
PM: Adding info for No Bus:tty42
PM: Adding info for No Bus:tty43
PM: Adding info for No Bus:tty44
PM: Adding info for No Bus:tty45
PM: Adding info for No Bus:tty46
PM: Adding info for No Bus:tty47
PM: Adding info for No Bus:tty48
PM: Adding info for No Bus:tty49
PM: Adding info for No Bus:tty50
PM: Adding info for No Bus:tty51
PM: Adding info for No Bus:tty52
PM: Adding info for No Bus:tty53
PM: Adding info for No Bus:tty54
PM: Adding info for No Bus:tty55
PM: Adding info for No Bus:tty56
PM: Adding info for No Bus:tty57
PM: Adding info for No Bus:tty58
PM: Adding info for No Bus:tty59
PM: Adding info for No Bus:tty60
PM: Adding info for No Bus:tty61
PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
initcall tty_init+0x0/0x1c5() returned 0 after 222 msecs
calling  pty_init+0x0/0x275()
initcall pty_init+0x0/0x275() returned 0 after 0 msecs
calling  cy_init+0x0/0x126()
Cyclades driver 2.5 (built May  7 2008 16:17:48)
initcall cy_init+0x0/0x126() returned 0 after 6 msecs
calling  specialix_init_module+0x0/0x40f()
sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998.
sx: derived from work (c) D.Gorodchanin 1994-1996.
sx: DTR/RTS pin is always RTS.
PM: Adding info for No Bus:ttyW0
PM: Adding info for No Bus:ttyW1
PM: Adding info for No Bus:ttyW2
PM: Adding info for No Bus:ttyW3
PM: Adding info for No Bus:ttyW4
PM: Adding info for No Bus:ttyW5
PM: Adding info for No Bus:ttyW6
PM: Adding info for No Bus:ttyW7
PM: Adding info for No Bus:ttyW8
PM: Adding info for No Bus:ttyW9
PM: Adding info for No Bus:ttyW10
PM: Adding info for No Bus:ttyW11
PM: Adding info for No Bus:ttyW12
PM: Adding info for No Bus:ttyW13
PM: Adding info for No Bus:ttyW14
PM: Adding info for No Bus:ttyW15
PM: Adding info for No Bus:ttyW16
PM: Adding info for No Bus:ttyW17
PM: Adding info for No Bus:ttyW18
PM: Adding info for No Bus:ttyW19
PM: Adding info for No Bus:ttyW20
PM: Adding info for No Bus:ttyW21
PM: Adding info for No Bus:ttyW22
PM: Adding info for No Bus:ttyW23
PM: Adding info for No Bus:ttyW24
PM: Adding info for No Bus:ttyW25
PM: Adding info for No Bus:ttyW26
PM: Adding info for No Bus:ttyW27
PM: Adding info for No Bus:ttyW28
PM: Adding info for No Bus:ttyW29
PM: Adding info for No Bus:ttyW30
PM: Adding info for No Bus:ttyW31
PM: Adding info for No Bus:ttyW32
PM: Adding info for No Bus:ttyW33
PM: Adding info for No Bus:ttyW34
PM: Adding info for No Bus:ttyW35
PM: Adding info for No Bus:ttyW36
PM: Adding info for No Bus:ttyW37
PM: Adding info for No Bus:ttyW38
PM: Adding info for No Bus:ttyW39
PM: Adding info for No Bus:ttyW40
PM: Adding info for No Bus:ttyW41
PM: Adding info for No Bus:ttyW42
PM: Adding info for No Bus:ttyW43
PM: Adding info for No Bus:ttyW44
PM: Adding info for No Bus:ttyW45
PM: Adding info for No Bus:ttyW46
PM: Adding info for No Bus:ttyW47
PM: Adding info for No Bus:ttyW48
PM: Adding info for No Bus:ttyW49
PM: Adding info for No Bus:ttyW50
PM: Adding info for No Bus:ttyW51
PM: Adding info for No Bus:ttyW52
PM: Adding info for No Bus:ttyW53
PM: Adding info for No Bus:ttyW54
PM: Adding info for No Bus:ttyW55
PM: Adding info for No Bus:ttyW56
PM: Adding info for No Bus:ttyW57
PM: Adding info for No Bus:ttyW58
PM: Adding info for No Bus:ttyW59
PM: Adding info for No Bus:ttyW60
PM: Adding info for No Bus:ttyW61
PM: Adding info for No Bus:ttyW62
PM: Adding info for No Bus:ttyW63
sx0: specialix IO8+ Board at 0x100 not found.
sx1: specialix IO8+ Board at 0x180 not found.
sx2: specialix IO8+ Board at 0x250 not found.
sx3: specialix IO8+ Board at 0x260 not found.
PM: Removing info for No Bus:ttyW0
PM: Removing info for No Bus:ttyW1
PM: Removing info for No Bus:ttyW2
PM: Removing info for No Bus:ttyW3
PM: Removing info for No Bus:ttyW4
PM: Removing info for No Bus:ttyW5
PM: Removing info for No Bus:ttyW6
PM: Removing info for No Bus:ttyW7
PM: Removing info for No Bus:ttyW8
PM: Removing info for No Bus:ttyW9
PM: Removing info for No Bus:ttyW10
PM: Removing info for No Bus:ttyW11
PM: Removing info for No Bus:ttyW12
PM: Removing info for No Bus:ttyW13
PM: Removing info for No Bus:ttyW14
PM: Removing info for No Bus:ttyW15
PM: Removing info for No Bus:ttyW16
PM: Removing info for No Bus:ttyW17
PM: Removing info for No Bus:ttyW18
PM: Removing info for No Bus:ttyW19
PM: Removing info for No Bus:ttyW20
PM: Removing info for No Bus:ttyW21
PM: Removing info for No Bus:ttyW22
PM: Removing info for No Bus:ttyW23
PM: Removing info for No Bus:ttyW24
PM: Removing info for No Bus:ttyW25
PM: Removing info for No Bus:ttyW26
PM: Removing info for No Bus:ttyW27
PM: Removing info for No Bus:ttyW28
PM: Removing info for No Bus:ttyW29
PM: Removing info for No Bus:ttyW30
PM: Removing info for No Bus:ttyW31
PM: Removing info for No Bus:ttyW32
PM: Removing info for No Bus:ttyW33
PM: Removing info for No Bus:ttyW34
PM: Removing info for No Bus:ttyW35
PM: Removing info for No Bus:ttyW36
PM: Removing info f
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
Messages in current thread:
[v2.6.26-rc1] possible circular locking in ecryptfs, Ingo Molnar, (Wed May 7, 4:02 pm)
Re: [v2.6.26-rc1] possible circular locking in ecryptfs, Ingo Molnar, (Fri May 9, 5:44 am)
Re: [v2.6.26-rc1] possible circular locking in ecryptfs, Cyrill Gorcunov, (Sat May 10, 4:47 am)
Re: [v2.6.26-rc1] possible circular locking in ecryptfs, Ingo Molnar, (Sun May 18, 7:40 am)
Re: [v2.6.26-rc1] possible circular locking in ecryptfs, Cyrill Gorcunov, (Sun May 18, 11:10 am)
Re: [v2.6.26-rc1] possible circular locking in ecryptfs, Cyrill Gorcunov, (Sun May 18, 9:27 am)
Re: [v2.6.26-rc1] possible circular locking in ecryptfs, Cyrill Gorcunov, (Sun May 18, 7:46 am)

linux-kernel:
Ingo Molnar	Re: [BUG] long freezes on thinkpad t60
Rafael J. Wysocki	Re: [Bug 10030] Suspend doesn't work when SD card is inserted
Jamie Lokier	Proposal for "proper" durable fsync() and fdatasync()
jimmy bahuleyan	Re: how about mutual compatibility between Linux's GPLv2 and GPLv3?
git:
Martin Langhoff	Handling large files with GIT
Matt Mackall	Re: cleaner/better zlib sources?
Wink Saville	git-svn segmetation fault
Bill Lear	Meaning of "fatal: protocol error: bad line length character"?
openbsd-misc:
Florin Andrei	firewall is very slow, something's wrong
Wijnand Wiersma	Almost success: OpenBSD on Xen
Marcus Andree	Re: OpenBSD kernel janitors
Richard Stallman	Real men don't attack straw men
linux-netdev:
David Miller	Re: tcp bw in 2.6
Rick Jones	Re: 2.6.24 BUG: soft lockup - CPU#X
Patrick McHardy	[NET_SCHED 00/04]: External SFQ classifiers/flow classifier
Patrick McHardy	Re: [PATCH 2/2] [e1000 VLAN] Disable vlan hw accel when promiscuous mode

Serial Driver Implementation Help	8 hours ago	Linux kernel
aacraid bad	9 hours ago	Linux general
Tools: GCC 3.4.6, Final GCC 3 Release	1 day ago	Applications and Utilities
GNU/Hurd is so awful	2 days ago	GNU/Hurd
read /dev/mem not working in 2.6	4 days ago	Linux general
Issues with NETLINK sockets	4 days ago	Linux kernel
Anyone experiancing compiling issues with 2.6.26.6 patching with rt patch 2.6.26.6-rt11?	5 days ago	Linux kernel
Change network interface from eth0 to ppp0	5 days ago	Linux general
kernel module to intercept socket creation	5 days ago	Linux kernel
command to set Subnet Mask	5 days ago	Linux general
[v2.6.26-rc1] possible circular locking in ecryptfs

Online users
