Justin Piszcz wrote:
quoted text
> Hardware:
> 
> 1. Utilized (6) 400 gigabyte sata hard drives.
> 2. Everything is on PCI-e (965 chipset & a 2port sata card)
> 
> Used the following 'optimizations' for all tests.
> 
> # Set read-ahead.
> echo "Setting read-ahead to 64 MiB for /dev/md3"
> blockdev --setra 65536 /dev/md3

That's actually 65k x 512byte blocks so 32MiB

quoted text
> # Set stripe-cache_size for RAID5.
> echo "Setting stripe_cache_size to 16 MiB for /dev/md3"
> echo 16384 > /sys/block/md3/md/stripe_cache_size
> 
> # Disable NCQ on all disks.
> echo "Disabling NCQ on all disks..."
> for i in $DISKS
> do
>   echo "Disabling NCQ on $i"
>   echo 1 > /sys/block/"$i"/device/queue_depth
> done
> 
> Software:
> 
> Kernel: 2.6.23.1 x86_64
> Filesystem: XFS
> Mount options: defaults,noatime
> 
> Results:
> 
> http://home.comcast.net/~jpiszcz/raid/20080528/raid-levels.html
> http://home.comcast.net/~jpiszcz/raid/20080528/raid-levels.txt
> 
> Note: 'deg' means degraded and the number after is the number of disks 
> failed, I did not test degraded raid10 because there are many ways you 
> can degrade a raid10; however, the 3 types of raid10 were benchmarked 
> f2,n2,o2.
> 
> Each test was run 3 times and averaged--FYI.
> 

Results are meaningless without a crucial detail - what was the chunk size 
used during array creation time? Otherwise interesting test :)

Cheers

Peter

--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/