* Arjan van de Ven <arjan@infradead.org> [2008-05-27 09:40:35]:
quoted text > On Tue, 27 May 2008 19:34:40 +0530
> Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> wrote:
> >
> > What we are proposing is a scaled time value that is scaled to the
> > current CPU capacity. If the scaled utilisation is 50% when the CPU
> > is at 100% capacity, it is expected to remain at 50% even if the CPU's
> > capacity is dropped to 50%, while the traditional utilisation value
> > will be 100%.
>
> When you use the word "capacity" I cringe ;(
>
> >
> > The problem in the above two cases is that we had assumed that the
> > maximum CPU capacity is 100% at normal capacity (without IDA).
> >
> > If the CPU is at half the maximum frequency, then scaled stats should
> > show 50%.
>
> see frequency != capacity.
> It's about more than frequency. It's about how much cache you have
> available too. If you run single threaded on a dual core cpu, you have
> 100% of the cache, but the cpu is 50% idle. But that doesn't mean that
> when you double the load, you actually get 2x the performance. So
> you're not at 50% of capacity!
You are right.... I kind of interchangeably used frequency and
capacity assuming capacity is linearly proportional to frequency!
In reality, I agree that capacity is not linearly proportional to
frequency and it is dependent on cache usage etc.
The differences apart, I am sure I have conveyed the relationship
between scaled stats and CPU frequency. I used the term 'capacity' to
generalise CPU performance, but I guess it may lead to a different
discussion. I will stick to frequency. :)
--Vaidy
quoted text > > The point I am trying to make is whether scaling should be done
> > relative to CPUs designed maximum capacity or maximum capacity under
> > current constraints is to be discussed.
>
> now you're back at "capacity".. we were at frequency before ;(
>
>
> >
> > Case A:
> > ------
> >
> > Scaled stats is stats relative to maximum designed capacity including
> > IDA
>
> you don't know what that is though.
>
--
unsubscribe notice To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
majordomo@vger.kernel.org
More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.tux.org/lkml/
Messages in current thread:
Re: [RFC PATCH v1 0/3] Scaled statistics using APERF/MPERF ... , Vaidyanathan Srinivasan , (Tue May 27, 11:26 am)