> On Sun, 2008-05-25 at 11:36 +0200, Arkadiusz Miskiewicz wrote:
> > On Saturday 24 May 2008, Andrew Morton wrote:
> > > On Fri, 23 May 2008 19:44:57 +0200 Arkadiusz Miskiewicz
> > > <arekm@maven.pl>
> >
> > wrote:
> > > > thinkpad z60m, Intel(R) Pentium(R) M processor 2.00GHz. kernel from
> > > > git from 1-2 days ago.
> > > >
> > > > Unfortunately it seems that suspend to ram/resume causes frequency
> > > > to be limited to 800MHz only. I can't set it to 2GHz again :-/
> > > >
> > > > scaling_max_freq is then 800000 and cannot be changed.
> > > >
> > > > reboot and the problem disappears until new suspend/resume cycle.
> > > >
> > > > cpufreq stuff is driven by acpi-cpufreq
> > > >
> > > > $ cpufreq-info
> > > > cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
> > > > Report errors and bugs to
linux@brodo.de, please.
> > > > analyzing CPU 0:
> > > > driver: acpi-cpufreq
> > > > CPUs which need to switch frequency at the same time: 0
> > > > hardware limits: 800 MHz - 2.00 GHz
> > > > available frequency steps: 2.00 GHz, 1.60 GHz, 1.33 GHz, 1.07 GHz,
> > > > 800 MHz available cpufreq governors: powersave, userspace, ondemand,
> > > > performance current policy: frequency should be within 800 MHz and
> > > > 800 MHz. The governor "performance" may decide which speed to use
> > > > within this range.
> > > > current CPU frequency is 800 MHz.
> > > >
> > > > /sys/devices/system/cpu/cpu0/cpufreq/affected_cpus:0
> > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq:800000
> > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq:2000000
> > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq:800000
> > > > /sys/devices/system/cpu/cpu0/cpufreq/related_cpus:0
> > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies:20
> > > >0000 0 1600000 1333000 1066000 800000
> > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors:powe
> > > >rsav e userspace ondemand performance
> > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq:800000
> > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:acpi-cpufreq
> > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor:performance
> > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq:800000
> > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq:800000
> > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed:<unsupported>
> > >
> > > Thanks. Is this a newly-occurring bug or did earlier kernels do this
> > > also?
> > >
> > > If it was newly added, do you know in which kernel version we might
> > > have added it?
> >
> > I wasn't able to reproduce the problem on final 2.6.24 but was able to
> > reproduce on final 2.6.25. Problem introduced somewhere between it seems.
> >
> > Note that 2-3 suspend to ram/resume cycles is needed to get into the
> > problem.
>
> Sounds related to:
> [Bug 374099] T61p speedstep problems (ondemand scheduler)
> https://bugzilla.novell.com/show_bug.cgi?id=374099
